Garrett GT2871R 345whp 315tq
Posted: Fri Feb 21, 2020 2:36 pm
My headgasket went back in September during the Villains Sportsland 6 event. I think the motor developed a head gasket leak back in July. After I put the motor back together, I wired in the MAP, IAT sensors, and Boost Solenoid. Kenny at Turbogixxer got me in on a time slot in Auburn WA! She made 345whp 315tq! This is off 92 pump gas at 16psi!!!
Video from the dyno day: https://www.youtube.com/watch?v=D6vSaRxBlR0
This setup is incredibly responsive! 8psi at 2200rpm! The boost ramps up FAST!
Fresh Paint:
Video from the dyno day: https://www.youtube.com/watch?v=D6vSaRxBlR0
- KA24DET
- NismotronicSA
- Wiseco Pistons 9.0:1 90mm (rings gapped for 360hp)
- Eagle Rods
- ARP Studs
- Tomei Head Gasket
- Garrett GT2871R
- 520cc 04 STi injectors
- ISR Turbo Manifold v2
- ISR 3 inch o2 elbow
- ISR 3 inch downpipe
- Innovate Wideband
- GM 3bar MAP
- GM IAT
- CX Racing S13 FMIC
- Stock FPR
- Stock Fuel Rail
- Z32 Twin Turbo Fuel Filte
This setup is incredibly responsive! 8psi at 2200rpm! The boost ramps up FAST!
Fresh Paint: