Rollon with CBR600, 50-120MPH- 7PSI ???
-
- 240sx Wannabe
- Posts: 172
- Joined: Mon Feb 20, 2006 8:19 pm
Rollon with CBR600, 50-120MPH- 7PSI ???
Alright 2 Days ago, Saturday Night a CBR600 rolled up on me, looked like a 2003-04, and honked and asked to race, so I did started at 50MPH, both took off he jumped a little at first and then slowly rolled past him and by the time we where going 120 he was a car lenth behind, so I was like no way, because by the way 7PSI and a passenger, so he started shaking his helmet, and of course wanted to roll again, so same sanario, started at about 50MPH again but this time he was 2 cars behind me at 120mph, now I have beat a M3, a 6.0 GTO, a mustang 5.0, and a right hand drive lexus with a supra engine, but this is the first time I have raced and pulled a bike, what do you guys think.
Tune it or Ruin it!!
- Cobra723
- Encyclopedia-Nissan
- Posts: 1421
- Joined: Mon Mar 14, 2005 5:13 pm
- Location: West Palm Beach, FL
- Contact:
there was either something seriously wrong with him or his bike, or he was hustling u.
1991 Nissan 240sx - awaiting 1jz install
1996 Toyota Supra TT - (1 of 27)http://www.cardomain.com/id/cobra723
1996 Toyota Supra TT - (1 of 27)http://www.cardomain.com/id/cobra723
-
- 240sx Wannabe
- Posts: 172
- Joined: Mon Feb 20, 2006 8:19 pm
I dont know that is possible, but the guy seemed pissed off and after the second rollon he would not race again, he stayed behind me and I slowed down to like 45 in a 65 and he would not go again, a friend of mine was following me in his M3 and he said that it looked like he was reving it out, My friend has a GSX600, but I cant say for sure, my car dynoed 271 rwhp at 7PSI.
Tune it or Ruin it!!
Maybe the bike is a POS. At 7lbs you wouldnt outrun a bike, hell maybe the guy was squid!Extreme135 wrote:I dont know that is possible, but the guy seemed pissed off and after the second rollon he would not race again, he stayed behind me and I slowed down to like 45 in a 65 and he would not go again, a friend of mine was following me in his M3 and he said that it looked like he was reving it out, My friend has a GSX600, but I cant say for sure, my car dynoed 271 rwhp at 7PSI.
I've ran a couple bike and a well driven GSX-R 600 walked my old 367rwhp RX-7 about a car length from 55-150
BUT that car also had me run even with an 02 ZX-6r.. prob was the rider.
-
- Knows Some Stuff About 240's!
- Posts: 291
- Joined: Sun Oct 02, 2005 9:36 pm
- Location: South Carolina
not to sound like an ass, but 271whp wont outrun a 600. My friend had a 01 R6, and he dusted a GT35R FD RX-7 from about 50mph on the freeway ( FD on pump gas about 1 bar, but still way over 270whp) and the crappy R6 murdered him multiple times
then I raped the R6 w/ the 929RR I had at the time
something was up with that race you had????
then I raped the R6 w/ the 929RR I had at the time
something was up with that race you had????
-
- 240sx Wannabe
- Posts: 172
- Joined: Mon Feb 20, 2006 8:19 pm
-
- Knows Some Stuff About 240's!
- Posts: 204
- Joined: Sun Jul 17, 2005 9:32 am
- Location: SFL
WOW...whats your setup?how did you get 271rwhp out of 7psi and also run high 12's at that boost level?Extreme135 wrote:I dont know that is possible, but the guy seemed pissed off and after the second rollon he would not race again, he stayed behind me and I slowed down to like 45 in a 65 and he would not go again, a friend of mine was following me in his M3 and he said that it looked like he was reving it out, My friend has a GSX600, but I cant say for sure, my car dynoed 271 rwhp at 7PSI.
"Whole car strapped,and I ain't talking seat belts"
-
- 240sx Wannabe
- Posts: 172
- Joined: Mon Feb 20, 2006 8:19 pm
I am running boost designs mani equal lenth, BD 3 in downpipe and 2.5 back, no cat, Boost Designs stage 3 T3/4 with a .48 hotside and 60 A/R with a stage 3 wheel. 370cc injectors, 255 FP, JWT reprogramed ECU, custom 2.5 in intercooler piping, Very Large custom intercooler, XS BOV, XS 38mm internal wastegate with a 7 lb. spring and all the extras, truthfully I can not believe that I made this much HP either with this setup, but the car feels very good, turbo spools fully around 2800 rpm.
Tune it or Ruin it!!
-
- 240sx Wannabe
- Posts: 176
- Joined: Fri Nov 05, 2004 6:29 pm
- Location: BC
i have an 03 cbr600 f4i with yosh pipe ... and not to rain on your parade but i dont you beat the bike. professional riders hit 10.8 in the 1/4 from a dead stop. at a 50mph roll and even a bad rider, he should have taken you by the top of 2nd (which is 100mph) or sometime in 3rd. ive raced the newest lambo (he had upgraded exhaust too) from a 50mph roll where i was low in the rpms even after i dropped a gear and we were neck and neck until about 120mph (ran out of road)
Minivans are tangible evidence of EVIL!