More pictures, more stuff

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

More pictures, more stuff

Post by rusted_s14 » Tue Aug 21, 2007 9:56 pm

First 240SX...shell
Image

Found a S14 for dirt cheap and bought it, a few weeks after I bought the car I got a kit, wheels and started bodywork
Image
Image
Image

A few months later I finally got suspension anddecided on the color and brought it to the booth to finish bodywork and paint
Image
Image
Image
Image
Image
Image
Notice the new kit?
Image

A few months after that I decided to finally do an event...with an open diff
I didn't want that front bumper...
Image
Image
Image

Well...after that event my paint got a little messed up plus it was a custom color so there was NO way i was gonna ever match that color again, so I decided to do a little makeover
Image
Image

A few months after that...it was time for a little power
Image
Image
Image
Image

Image
Image
Image
Image
Image
Image
Image
Image
Last edited by rusted_s14 on Sun Mar 30, 2008 10:21 pm, edited 3 times in total.

User avatar
Biggamehitt
Dont Question My Nissan Knowledge
Posts: 589
Joined: Mon Jan 23, 2006 12:43 am
Location: Misawa AFB Japan
Contact:

Post by Biggamehitt » Wed Aug 22, 2007 3:49 pm

yea bro i like the current setup the best.... coolness

katinlv
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1714
Joined: Wed Sep 07, 2005 4:23 pm

Post by katinlv » Wed Aug 22, 2007 6:18 pm

TD06-20g?

Whats the turbo set up?

rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

Post by rusted_s14 » Wed Aug 22, 2007 6:30 pm

katinlv wrote:TD06-20g?

Whats the turbo set up?
Turbo set-up consists of Greddy TD05H-18G, ebay intercoolerkit, manifold, turbo elbow, and downpipe.
For fuel I was planning on using Injected Performance 400CC's with a ProjectNissan top feed fuel rail, haven't figured out how I'm gonna get the harness to work with the clips yet (it's like the DSM's, break the shrouding of the clips on the injectors?)

slos14
Encyclopedia-Nissan
Posts: 1041
Joined: Tue Aug 17, 2004 12:54 pm
Location: st. louis

Post by slos14 » Wed Aug 22, 2007 8:02 pm

the guys at Injected Performance are good guys they are friends with my buddy chris . good luck with the car it looks great now.

justin
ka-t on the way
"Horsepower sells cars, torque wins races" - Caroll Shelby
Image

User avatar
chubbza5
Dont Question My Nissan Knowledge
Posts: 815
Joined: Tue Jan 16, 2007 12:35 pm
Contact:

Post by chubbza5 » Wed Aug 22, 2007 10:47 pm

yeah i wasn't diggin the kit that got smashed up, it come out too far. the setup now looks clean as hell, keep it that way
Image

RightFoot
Knows Some Stuff About 240's!
Posts: 303
Joined: Sat Apr 28, 2007 9:18 pm
Location: So Fla

Post by RightFoot » Thu Aug 23, 2007 9:52 am

Nice you saved a 240
Just a lightly modded 92' 240sx 5 speed thats faster, better looking and more reliable than 99.9% of the junk on the road.

User avatar
TanManS14
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2764
Joined: Wed Apr 26, 2006 7:28 pm
Location: Raleigh, NC

Post by TanManS14 » Thu Aug 23, 2007 12:07 pm

damn it started out like **** with that kit lol. You ended it the right way though. Beautiful car.
It's always broken.

MyRedS14
Knows Some Stuff About 240's!
Posts: 446
Joined: Sat Dec 24, 2005 1:13 pm
Location: San Diego, CA

Re: Rusted_S14 mobile introduction

Post by MyRedS14 » Thu Aug 23, 2007 9:52 pm

Looking real nice!! 8) Great save!
rusted_s14 wrote: Image
Image
Specs on the wheels?
1995 240sx SE KA-T
50k miles
FOR SALE? Make an offer over $8k
Image


AMS GT32, JGS mani, 555's,
AEM Truboost, oil pressure gauge and wideband, GReddy RS bov
Tial wg, Walbro, JRC FMIC

Calum RealTime ECU

Charlie240sxt
Dreams of owning a 240!
Posts: 61
Joined: Thu Apr 22, 2004 10:34 pm
Location: Tulsa,Oklahoma
Contact:

Re: Rusted_S14 mobile introduction

Post by Charlie240sxt » Thu Aug 30, 2007 6:32 pm

MyRedS14 wrote:Looking real nice!! 8) Great save!
rusted_s14 wrote: Image
Image
Specs on the wheels?
X2
04 Audi A4 1.8T ,95 240sx SE,12 Ram 2500 HD
........Daily................Toy................Tow/Haul.......

rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

Post by rusted_s14 » Thu Aug 30, 2007 8:56 pm

17x10 +10

MyRedS14
Knows Some Stuff About 240's!
Posts: 446
Joined: Sat Dec 24, 2005 1:13 pm
Location: San Diego, CA

Post by MyRedS14 » Thu Aug 30, 2007 10:28 pm

With just a roll? What kind of camber are you running in the rear?

And maybe I missed it, but what wheels are those?

EDIT: Those are just the FN's painted, right?
1995 240sx SE KA-T
50k miles
FOR SALE? Make an offer over $8k
Image


AMS GT32, JGS mani, 555's,
AEM Truboost, oil pressure gauge and wideband, GReddy RS bov
Tial wg, Walbro, JRC FMIC

Calum RealTime ECU

rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

Post by rusted_s14 » Thu Aug 30, 2007 10:48 pm

I did a baseball type roll with a slight pull, camber is -3.6 (I can probally get away with less with smaller tires 245/45) And they are just FN's painted white :)

User avatar
Razo240sx
Knows Some Stuff About 240's!
Posts: 465
Joined: Thu Dec 01, 2005 9:09 am
Location: Nothern New Jersey
Contact:

Post by Razo240sx » Fri Aug 31, 2007 6:59 am

a friend of mine has that 18g on his eclipse. Its a pretty nice turbo setup. I tried to find one for my KA-T setup but went with a s15 t28 instead.
Image

supergangstamario
Learners Permit
Posts: 11
Joined: Mon Jan 22, 2007 6:41 pm
Contact:

Post by supergangstamario » Fri Aug 31, 2007 2:49 pm

very nice looking car! i'm a sucker for white wheels!

User avatar
jmhalder
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1542
Joined: Thu Oct 27, 2005 8:34 am
Contact:

Post by jmhalder » Sun Sep 02, 2007 7:20 am

gotta agree with the above, not diggin the aero, but the last pics with the stock bumper look AMAZING... nice setup 8)
13.36 @ 105.97, as of 10-27-07
-------------------------------
Holset HY-35, STI inj.'s bored to 650's, NVSRAM and Nemesys, N60, Walbro 255, 3" exhaust with FREE flowing mufflers and no cats, Zeitronix ZT-2, crappiest (Closest to stock) ACT clutch, Fidanza, Nismo mounts, JGS mani, JGS oil lines, ebay FMIC, ebay adapter with 3" K&N, and im the FIRST S14 KA to run a. U12 ecu

2 KA's down, 1+ to go.
KA24DE + 12psi = Turn ya out

MyRedS14
Knows Some Stuff About 240's!
Posts: 446
Joined: Sat Dec 24, 2005 1:13 pm
Location: San Diego, CA

Post by MyRedS14 » Sun Sep 02, 2007 9:24 am

jmhalder wrote:gotta agree with the above, not diggin the aero, but the last pics with the stock bumper look AMAZING... nice setup 8)


I like these sideskirts, but none of the other Aero
Image


It's amazing, though, how clean it looks with absolutely no aero. I guess that's what happens when you pick the right size/offset/brand of wheels... 8)
1995 240sx SE KA-T
50k miles
FOR SALE? Make an offer over $8k
Image


AMS GT32, JGS mani, 555's,
AEM Truboost, oil pressure gauge and wideband, GReddy RS bov
Tial wg, Walbro, JRC FMIC

Calum RealTime ECU

User avatar
Sidewayzzz
Dreams of owning a 240!
Posts: 62
Joined: Sat Mar 25, 2006 11:33 am
Location: Vegas
Contact:

Post by Sidewayzzz » Sun Sep 02, 2007 10:41 am

aero made it look much betters, looks terrible. Get a new front bumper, put the aero back on and go slide it! :lol:

Justin L
240sx Wannabe
Posts: 187
Joined: Sat Apr 01, 2006 9:43 pm
Location: Charlotte, NC

Post by Justin L » Sun Sep 02, 2007 3:16 pm

What color green is that? Maybe a manufacturer's color? I like it. Sucks that you got it on the wheels though.

Charlie240sxt
Dreams of owning a 240!
Posts: 61
Joined: Thu Apr 22, 2004 10:34 pm
Location: Tulsa,Oklahoma
Contact:

Post by Charlie240sxt » Tue Sep 04, 2007 4:30 am

front wheels?
04 Audi A4 1.8T ,95 240sx SE,12 Ram 2500 HD
........Daily................Toy................Tow/Haul.......

Justin L
240sx Wannabe
Posts: 187
Joined: Sat Apr 01, 2006 9:43 pm
Location: Charlotte, NC

Post by Justin L » Tue Sep 04, 2007 6:53 am

^^^fno1r-c's 17x9+15

User avatar
BigLoukaT
Dont Question My Nissan Knowledge
Posts: 879
Joined: Sun Jul 23, 2006 11:03 am
Location: MA

Post by BigLoukaT » Tue Sep 04, 2007 9:35 am

My favorite phase of this car is BY FAR the stock look with the green paint (except for the overspray on the rims). First set of aero was not at all to my taste, and the last stuff you ended up with will probably turn out alright as long as you don't go too aggressive.

Damn I love stock bodied, nice wheel look with a roll/pull.
1990 S13
Boosted single slammer
MS DIYPNP
npx from 240sxforums wrote:i figure from my very limited knowledge about the 240 and under the hood about cars in general i would follow the sr20det trend.

rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

Post by rusted_s14 » Fri Oct 12, 2007 7:37 pm

Image

bloodsport
Knows Some Stuff About 240's!
Posts: 217
Joined: Wed Jan 10, 2007 8:11 am
Location: kck
Contact:

Post by bloodsport » Fri Oct 12, 2007 7:39 pm

what suspension do you have?
Image

Jackasknissan
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1517
Joined: Thu Mar 29, 2007 5:27 pm
Location: Richmond, BC

Post by Jackasknissan » Fri Oct 12, 2007 8:23 pm

I love how low it sits in the last pic,
Turbo24sxt wrote:SOHC > DOHC ... period ...
oaznbeasto wrote: Hey 6 posts, Go **** yourself! learn something then post[/quote

rusted_s14
Driving Mom's Station Wagon
Posts: 37
Joined: Mon Mar 05, 2007 7:28 pm

Post by rusted_s14 » Fri Oct 12, 2007 8:38 pm

Parts Shop Max, huge difference from my shot Tanabe's

Image
Image

User avatar
jasonS14
Learners Permit
Posts: 10
Joined: Mon Oct 15, 2007 6:56 pm

Post by jasonS14 » Mon Oct 15, 2007 10:27 pm

yo..how you get ur wheels so flushed, i got 17x10 +12 in the rear and i sticks out like 1 inch

Image

adamky
SuperMod
Posts: 3508
Joined: Wed May 31, 2006 6:40 am
Location: Louisville, KY

Post by adamky » Tue Oct 16, 2007 10:32 am

BigLoukaT wrote:First set of aero was not at all to my taste, and the last stuff you ended up with will probably turn out alright as long as you don't go too aggressive.

Damn I love stock bodied, nice wheel look with a roll/pull.
Image


jasonS14 wrote:yo..how you get ur wheels so flushed, i got 17x10 +12 in the rear and i sticks out like 1 inch

[img]http://i5.photobucket.com/albums/y151/b ... ush015.jpg[/im]
More camber + fender pull should fix it.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, etc, etc...
--> YouTube channel --> my build thread
Image

bloodsport
Knows Some Stuff About 240's!
Posts: 217
Joined: Wed Jan 10, 2007 8:11 am
Location: kck
Contact:

Post by bloodsport » Tue Oct 16, 2007 11:18 am

looks really good man... nice build
Image

slide_show
240sx Wannabe
Posts: 190
Joined: Mon Apr 25, 2005 8:43 am
Location: south
Contact:

Post by slide_show » Tue Oct 16, 2007 3:57 pm

lookinig good mb...
cant wait to see it at events...
Image
Image
duh mah! wheels and suspension!

Post Reply