Yes I am working on a Full Race Miata
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
Yes I am working on a Full Race Miata
I picked it up about 2 months ago and will be built with about 275 hp, but it weighs 2100 Lbs with a 1/3 tank.
here are some pics of mine
Factory Aluminium Hood stripped of paint
Here is what Im ordering for track use Hoosier A6 275/35 15
here are some pics of mine
Factory Aluminium Hood stripped of paint
Here is what Im ordering for track use Hoosier A6 275/35 15
Last edited by 1993ka24det on Sat Jun 29, 2013 10:39 pm, edited 4 times in total.
When Cornered, What G's Can You Pull
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
Plans
Suspension:
Xida-S Coilover
Spring Rates (dont know yet)
Racing Beat Sway Bars
Racing Beat End Links
V8 Roadsters Control Arms
Frog Arms
Flyin Miata Butterfly Brace
Engine:
Wiseco 9.0 comp Pistons
Eagle Rods
Kelford Custom Grinds
Custom Equal Length Manifold
Garrett GT2560 Turbo
3" Stainless Downpipe
3" Aluminium Before Cat Exhaust
Track Dog Racing Supercharger Front Mount Intercooler
Drivetrain:
Fidanza Lightweight Aluminum Flywheel 7 Lbs
ACT Stage 2 Organic Clutch
Driveshaft Shop Carbon Driveshaft
Cusco LSD 1.5 Way
Aerodynamics:
Autokonexion Fastback Hard Top
Autokonexion Wide Body
Carbon Doors
Aluminium Undertray
Lotus Rear Diffuser
Custom Splitter
Wheels/Tires
Enkei RP-F1 15x7
Nitto NT-01 225's (street use)
Hoosier A6 275/35 15 (track use)
__________________
Suspension:
Xida-S Coilover
Spring Rates (dont know yet)
Racing Beat Sway Bars
Racing Beat End Links
V8 Roadsters Control Arms
Frog Arms
Flyin Miata Butterfly Brace
Engine:
Wiseco 9.0 comp Pistons
Eagle Rods
Kelford Custom Grinds
Custom Equal Length Manifold
Garrett GT2560 Turbo
3" Stainless Downpipe
3" Aluminium Before Cat Exhaust
Track Dog Racing Supercharger Front Mount Intercooler
Drivetrain:
Fidanza Lightweight Aluminum Flywheel 7 Lbs
ACT Stage 2 Organic Clutch
Driveshaft Shop Carbon Driveshaft
Cusco LSD 1.5 Way
Aerodynamics:
Autokonexion Fastback Hard Top
Autokonexion Wide Body
Carbon Doors
Aluminium Undertray
Lotus Rear Diffuser
Custom Splitter
Wheels/Tires
Enkei RP-F1 15x7
Nitto NT-01 225's (street use)
Hoosier A6 275/35 15 (track use)
__________________
When Cornered, What G's Can You Pull
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
I know this isnt a KA but I have a quick question.
My power goals are around 250-280hp, but not to exceed 300hp. So can I run 10:1 comp with 14psi. That should be 135hp with just the engine and with the 14 psi will take it to 270 hp.
My power goals are around 250-280hp, but not to exceed 300hp. So can I run 10:1 comp with 14psi. That should be 135hp with just the engine and with the 14 psi will take it to 270 hp.
Last edited by 1993ka24det on Sat Jan 07, 2012 2:40 pm, edited 2 times in total.
When Cornered, What G's Can You Pull
-
- Dreams of owning a 240!
- Posts: 90
- Joined: Thu May 12, 2011 9:34 am
- Location: knoxville,tn
- Contact:
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
here is an update
No go fast goodies but some thing that has been bothering me...yellow/orange fog lamps so I put LED strips inside the factory lenses
I was trying to get the Hankook Z214 but they were on back order so I got these with good reviews
Here are the wheels I got and the tires are being sold to a friend
So I only got two of the wheels so far the others should come in on monday so here are some pics
30mm ammo shell with laser etching of gears
My wheels and tires
205 vs 225
Fitment on the wheels
I put the Mazda hub cap on it LOL
and some engine pics
here is some stuff that came in but still waiting on my clutch
7lbs flywheel
oil relocation
No go fast goodies but some thing that has been bothering me...yellow/orange fog lamps so I put LED strips inside the factory lenses
I was trying to get the Hankook Z214 but they were on back order so I got these with good reviews
Here are the wheels I got and the tires are being sold to a friend
So I only got two of the wheels so far the others should come in on monday so here are some pics
30mm ammo shell with laser etching of gears
My wheels and tires
205 vs 225
Fitment on the wheels
I put the Mazda hub cap on it LOL
and some engine pics
here is some stuff that came in but still waiting on my clutch
7lbs flywheel
oil relocation
When Cornered, What G's Can You Pull
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
It is.......JK but here are some video's i finally uploaded808KA wrote:Great pics. For a second, I thought the supercharged V8 was in the miata! lol
Lingenfelter http://youtu.be/9tX0QQS7Rxc
Audi R8 http://youtu.be/NODXXcfh6hc
When Cornered, What G's Can You Pull
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
Yeah, my younger brother has a turbo H22 Prelude and high power 2g Eclipse GSX but I always enjoyed my little '93 Altima when it had around 200whp (t25) and even now just NA bolt ons. I guess I've always been more into driving a slow car fast type of person and would go nuts having to baby the throttle all the time lol....
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM
Just the videos that are above a few posts and plus this oneharkey wrote:god dam u have any vids of it on track?
http://www.youtube.com/watch?v=kvw5kJYp ... ature=plcp
When Cornered, What G's Can You Pull
-
- Dont Question My Nissan Knowledge
- Posts: 659
- Joined: Wed May 28, 2008 5:31 am
- Location: In The Middle Of No Where CLOVIS NM