GUESS WHAT GUESS WHAT GUESS WHAT GUESS WHAT ?!????! I found the short in my harness, tied up some loose wiring(soldered and heat shrinked), and now my MS2 is communicating with the car. Later this week I'm going to load the start tune and go from there.
Sad thought, I think my turbo is on its last leg :/
Good thought, my turboholic 264/264's in
d.p's 95 KA-T Build
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
Re: d.p's 95 KA-T Build (2015 update pg.6)
2015 Update!!!!!
So, I finally got off my ass and start working on the car. I bought a ton a of parts and nothing fit... I got super upset and stopped working on it yet again. It started with the CF trunk lid that didn't fit, and got stuck closed. Then I got a precision 6262... which also didn't fit with my manifold. I got super annoyed and talked to some friends about doing all the work and I'd pay for it in trade of parts and gear and what not. They agreed and this is where we are now.
If you notice the eBay GT45 and are like "he still hasn't learned eBay is crap". false. The GT45's previous owner had the internals replaced with Garrett parts. I took it to a local turbo shop, they looked at it and said the internals were good and balanced. I took this as **** good to go until I upgrade again. Engine should go in tonight. I'll keep everyone updated.
So, I finally got off my ass and start working on the car. I bought a ton a of parts and nothing fit... I got super upset and stopped working on it yet again. It started with the CF trunk lid that didn't fit, and got stuck closed. Then I got a precision 6262... which also didn't fit with my manifold. I got super annoyed and talked to some friends about doing all the work and I'd pay for it in trade of parts and gear and what not. They agreed and this is where we are now.
If you notice the eBay GT45 and are like "he still hasn't learned eBay is crap". false. The GT45's previous owner had the internals replaced with Garrett parts. I took it to a local turbo shop, they looked at it and said the internals were good and balanced. I took this as **** good to go until I upgrade again. Engine should go in tonight. I'll keep everyone updated.
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
Re: d.p's 95 KA-T Build
No one gives a ****, but the cars running... yay lol. Setting in the rings, gotta take care of some issues with the fuel system, charge piping, exhaust, brakes, suspension, fu fu ****, then a tune.
Re: d.p's 95 KA-T Build
Congrats pimp.
<< Yuh dun know!!
Cross......... Angry........ Miserable.........
SoundEfx up in here causing trouble......
"I'm a BAD man... BAD man doh dance..." ...... " That bam-bam is ..MINE..!! "
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
Re: d.p's 95 KA-T Build
Little update, Car made power with the GT45 then blew up. So after rebuilding 5times and countless turbos. We finally came to the conclusion that its never going to make over 5 consistently so put a tiny turbo on it and jam it in a drift car. Anyways, this chassis will be getting a 2J and an auto soon. However I imported a 95 Silvia that would lover a 350-400hp setup
Heres the new chassis.
Heres the new chassis.
-
- Dont Question My Nissan Knowledge
- Posts: 597
- Joined: Sat Mar 23, 2013 9:57 am
- Location: lumberton, NC
Re: d.p's 95 KA-T Build
What caused it to blow?
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
Re: d.p's 95 KA-T Build
Melted the ringlands on the wisecos. Then kept rebuilding with **** parts so it was bound to blow.
Re: d.p's 95 KA-T Build
Ouch. Guess "getting what you pay for" has reared its head again.
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
Re: d.p's 95 KA-T Build
From one of the last times the car ran.
Next time this car sees the street it'll be 2J sleeper
Next time this car sees the street it'll be 2J sleeper
Re: d.p's 95 KA-T Build
And that will be in two months right? lol
Keep us posted pimp.
Keep us posted pimp.
<< Yuh dun know!!
Cross......... Angry........ Miserable.........
SoundEfx up in here causing trouble......
"I'm a BAD man... BAD man doh dance..." ...... " That bam-bam is ..MINE..!! "