mmmS13's Backwards build.
Yeah I think my iacv has gone to poop. I was talking to 500hpka240sx on xbox live and was telling me about cleaning it out. I may do that or just try to get my idle around 1100. a high idle wouldnt besuch a bad thing if it keeps it from stalling.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
Little update of whats been going on, gave my neighbor a ride in my car and did a small pull with a 350z. I had spark blowout like a mofo (1step colder plugs) they were great plugs for 9psi but up past 11psi they are poop so hopefully another step colder should do the trick.
Also fixed some slack in my gas pedal which makes me wonder if I was ever getting truly WOT. I have a short video I took of getting on the highway hopefully my GoPro got most of the footage before filling up the memory card. Ill upload that as soon as I can.
Also fixed some slack in my gas pedal which makes me wonder if I was ever getting truly WOT. I have a short video I took of getting on the highway hopefully my GoPro got most of the footage before filling up the memory card. Ill upload that as soon as I can.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
Update
Finally got proper spark plugs Bkr7e's gapped at .025 I believe and oh my goodness Im in love. Once I fix my overheating issue (potential air bubble in cooling system) Ill get some videos
Also the other video I said I would upload from my gopro got full after 30 seconds of video So its just me pulling out of my driveway lol
Finally got proper spark plugs Bkr7e's gapped at .025 I believe and oh my goodness Im in love. Once I fix my overheating issue (potential air bubble in cooling system) Ill get some videos
Also the other video I said I would upload from my gopro got full after 30 seconds of video So its just me pulling out of my driveway lol
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
You're a maniac.
Stock block at 16psi.
That must feel awesome.
I'm running a very similar setup on a stock block, and I've been nervous to crank it up to 12 psi. I guess i need to grow a pair. LOL
Do you know what timing your enthalpy ecu is running at 16psi?
Stock block at 16psi.
That must feel awesome.
I'm running a very similar setup on a stock block, and I've been nervous to crank it up to 12 psi. I guess i need to grow a pair. LOL
Do you know what timing your enthalpy ecu is running at 16psi?
Turbonetics 50 Trim T3/T4 .63ar
JGS Log Mani & Downpipe
Turbonetics Wastegate
Greddy Type RS Blow Off
PLX Wideband
Prosport Boost and Oil Gauge
CalumRT
WRX STI Injectors
JGS Log Mani & Downpipe
Turbonetics Wastegate
Greddy Type RS Blow Off
PLX Wideband
Prosport Boost and Oil Gauge
CalumRT
WRX STI Injectors
LPime001 wrote:You're a maniac.
Stock block at 16psi.
That must feel awesome.
I'm running a very similar setup on a stock block, and I've been nervous to crank it up to 12 psi. I guess i need to grow a pair. LOL
Do you know what timing your enthalpy ecu is running at 16psi?
Hah thanks man it feels really good. Im at the point where I want to push the limits, esp. being on 91 octane lol. I've got no clue what my timing is with the Enthalpy ecu so sorry about that. I wish I knew, its beautifully done. Hats off to Enthalpy if they ever come across my thread.
The more I look into the picture I took I also notice Im making 16psi before 4k rpms in 5th gear lol and my temp gauge looks good! (Not spiked up to hot)
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
Re: mmmS13's Backwards build. UPDATE
Well, I've been away for a little while so I figured I'd update on whats been going on with the car and whatnot. So I finally fixed the idle by bumping it up to 1100 rpms. Now it doesn't stall which makes me a happy camper. Still running 16psi on the stock block
Got a lovely star smog paper in the mail thanks to the "great" state California, so the car is going to sit for awhile.
Im also in the process of joining the Navy so the car sitting isn't really a big deal to me.
Also bought some cheap spacers to see if I would need a 5, 10 or 15mm spacer in the rear for a nicer fitment. Slipped on two 5mm spacers on a corner as a test fit and my results were not too shabby. (Not driving on stacked spacers just a test fit)
So now it would be 17x9 +7
So im sort of debating of keeping the car or selling it at the moment. All its going to do is sit in my driveway while im away and I kind of want to start a new project. But if I keep the car its getting a built bottom end, 18x10.5s in the rear with a nice sticky 285. Possibly even meth if I stay in Cali with this weak 91 octane.
Got a lovely star smog paper in the mail thanks to the "great" state California, so the car is going to sit for awhile.
Im also in the process of joining the Navy so the car sitting isn't really a big deal to me.
Also bought some cheap spacers to see if I would need a 5, 10 or 15mm spacer in the rear for a nicer fitment. Slipped on two 5mm spacers on a corner as a test fit and my results were not too shabby. (Not driving on stacked spacers just a test fit)
So now it would be 17x9 +7
So im sort of debating of keeping the car or selling it at the moment. All its going to do is sit in my driveway while im away and I kind of want to start a new project. But if I keep the car its getting a built bottom end, 18x10.5s in the rear with a nice sticky 285. Possibly even meth if I stay in Cali with this weak 91 octane.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
-
- Driving Mom's Station Wagon
- Posts: 39
- Joined: Tue May 28, 2013 12:09 pm
- Location: jacksonville
Re: mmmS13's Backwards build.
wow 16psi on a stock block with over 200k ***** crazy. you sir have some ball fora that lol. i like the look of the car overall. clean
-
- Driving Mom's Station Wagon
- Posts: 26
- Joined: Fri Aug 24, 2007 4:55 pm
- Location: Woodbridge, Virginia
Re: mmmS13's Backwards build.
living on the edge lol
Re: mmmS13's Backwards build.
16lbs on stock block? Very ballsy, but can pay off. A buddy of mine ran 400whp stock block for three years until it finally blew up. Best of luck man.
Re: mmmS13's Backwards build.
Thanks guys, im really playing devils advocate with this setup but as my first car/project I feel I should push the limits of it and see how well it holds.
I probably won't up the boost anymore as im still trying to figure out getting around star smog which seems impossible at this point. If I do get the car back on the road it won't see more than 16psi until someone on the road beats me, unless its an obvious loss like something double my power.
I probably won't up the boost anymore as im still trying to figure out getting around star smog which seems impossible at this point. If I do get the car back on the road it won't see more than 16psi until someone on the road beats me, unless its an obvious loss like something double my power.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
- schmauster920
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2612
- Joined: Tue Feb 20, 2007 5:25 pm
- Location: CA
Re: mmmS13's Backwards build.
We should hang out when i get my ka-t running.... again... big t4 on 10psi might be a contender
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
Re: mmmS13's Backwards build.
schmauster920 wrote:We should hang out when i get my ka-t running.... again... big t4 on 10psi might be a contender
Hell yeah man im down. Just get your car running soon as the Navy is just around the corner for me.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
-
- Knows Some Stuff About 240's!
- Posts: 463
- Joined: Thu Sep 09, 2010 5:45 pm
- Location: Las Vegas
Re: mmmS13's Backwards build.
what gauge pod is that for your boost gauge?
Re: mmmS13's Backwards build.
ATI 13-EZPOD-05 EZ Gauge Pod Dual 52mm
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^