01 maxima coils

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
Post Reply
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 540
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA
Contact:

01 maxima coils

Post by RosadoRacing » Sun Mar 17, 2013 1:04 pm

I went to the salvage yard to buy 95 maxima coils as back ups and noticed a 01 maxima in the yard. the coils look different and probably provide better spark. I know efeezi used them but everyone else including me uses the 95 ones. 01 maxi are rare to find in the yard so I got lucky ill keep everyone posted on how they compare far as gap and boost.
http://imageshack.us/a/img801/8660/imag0611y.jpg

BoBaCk1
240sx Wannabe
Posts: 156
Joined: Wed May 27, 2009 7:56 pm
Location: houston tx,guam

Post by BoBaCk1 » Tue Mar 26, 2013 3:33 am

Can't wait to see the results.
Built ka-t
Arias 8:8:1 .20 over
K1 rods
Arp head,main,rod studs
Kelford 272's,dual valve springs
Precision 6262sp .82a/r, peakboost manifold
Cxracing fmic
Fuel injector development 2000cc
Proefi pro128, e85 flex fuel
Rb25 flywheel, dxd 350z clutch

KYLEBRENAY
Knows Some Stuff About 240's!
Posts: 204
Joined: Wed Apr 05, 2006 5:26 pm
Location: Georgia/Florida

Post by KYLEBRENAY » Tue Mar 26, 2013 10:30 pm

Those are the ones I have. They have worked out great for me. I don't boost more than 21psi but I run .030 gap with them at 21psi to 8k RPM with zero issues.
KA-T Forever

Berserker
Dont Question My Nissan Knowledge
Posts: 823
Joined: Tue Sep 19, 2006 4:15 pm
Location: IL

Post by Berserker » Wed Mar 27, 2013 4:33 am

Dyno them for 700whp to see if they hold. :) Im interested too if they hold well I might switch as well lol
608 whp @ 27.25 psi powered by Precision6262
Image

RosadoRacing
Dont Question My Nissan Knowledge
Posts: 540
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA
Contact:

Post by RosadoRacing » Thu Mar 28, 2013 4:05 pm

I'm not going back to the dyno but 30psi should net around 690whp so i'm a play with the gap there and see what she likes, i'm racing next weekend at street wars there's only two runs so I don't want to Mess with it there ill leave it at .018 gap and run 25psi ill keep ya posted on how it goes hopefully low tens :-)

RosadoRacing
Dont Question My Nissan Knowledge
Posts: 540
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA
Contact:

Post by RosadoRacing » Sat Mar 30, 2013 5:41 pm

I took the car out to try out the Coils I tried them with ngk bkr7 stock gap I think are like .032 on 14psi 480whp no blow out at all ran strong I wanted to try them at 25psi but the plug may be too hot and gap to high i'm a try them at .020 at the track next weekend so far so good except traction on the street is non existent lol

Berserker
Dont Question My Nissan Knowledge
Posts: 823
Joined: Tue Sep 19, 2006 4:15 pm
Location: IL

Post by Berserker » Sun Mar 31, 2013 9:37 am

Don't you wantnbto gap them down take it on the highway see how it pulls, if it holds?
608 whp @ 27.25 psi powered by Precision6262
Image

RosadoRacing
Dont Question My Nissan Knowledge
Posts: 540
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA
Contact:

Post by RosadoRacing » Sun Mar 31, 2013 10:42 am

I'm positive they'll hold a .020 gap at 25psi I didn't go on the highway cuz i'm low on fuel and have to get e85 Tom since that's when they switch over from e70 to e85 but my old 95 coils never Held up to 14psi without being gapped so I can already see a huge difference.

Post Reply