Page 1 of 1

After waiting for 4+yrs....

Posted: Wed Jan 08, 2014 1:24 pm
by Altima-DET
After 4+yrs of sitting the Altima is back on the road. Installed the GT35r on her with the 850cc injectors.... and thanks to Sdaigle we put a rough tune in her and I drove it 900 miles from Pa to FL. I can't tell you how good it felt to drive her even though I probably should have test her out for a few days prior, but HEY you gotta live a little!

She sat under a tree... :-(

Image

All washed up!!
Image

in FLORIDA!!!
Image

GT35R resting in it's new home

Image
Image
Image

350Z Track Rotors conversion with 300ZX calipers

Image
Image
vs.... original size rotors
Image

Lots of Tuning to be done but she hella fast compared to the old t3/t4......!

Re: After waiting for 4+yrs....

Posted: Wed Jan 08, 2014 6:02 pm
by ATL240
Looks badass! I'm guessing you're gonna run e-85 with those big injectors?

Re: After waiting for 4+yrs....

Posted: Wed Jan 08, 2014 10:56 pm
by shift_down
Looking good!
I am definitely curious as to how much powa you are making.

Re: After waiting for 4+yrs....

Posted: Thu Jan 09, 2014 4:22 am
by Altima-DET
You and me both! At 7psi with the current setup on it, it's faster (butt dyno) than it was with 15psi with the T3/T04E 50 tirm I had on there. Thanks to Jmac636 I was able to get Consult working now I can map trace and start turning up the boost. Planning on running around18-20PSI when complete, but it baby steps. It's a build motor with Wiesco pistons and the heads been ported and polished. It's gonna be fun that's all I can say

Re: After waiting for 4+yrs....

Posted: Thu Jan 09, 2014 6:53 am
by neverlift
wewt another turbo ka in florida!!

What manifold if that?

wtf is up with birds rage dumping on nissans on a rest. I get it too but no tree :angry-cussingblack:

If he is anywhere in jacksonville e85 is pretty much out(I cant think of a single pump off the top of my head) I run 880's on 93octane. Theoretically 370's duty cycle out at ten psi on a t3 meaning he needs at least 740cc to run 20 psi on pump gas(turbo depending obviously), I dont see a problem having a little extra fuel.

Always been curious about a turbo altima nice work!

Re: After waiting for 4+yrs....

Posted: Thu Jan 09, 2014 7:20 am
by Altima-DET
YEP! no e85 anywhere I have found. I'm running 850cc injectors so I have plenty of fuel for the pressure I'm going to run. The car has been turboed for the last 12-13yrs. But it's time to make bigger power and have more fun. The Manifold is from RevHard but again I bought it back in 2000 when I first started on the project.

Re: After waiting for 4+yrs....

Posted: Fri Jan 10, 2014 11:56 am
by street_240sx
850cc aren't even that big. E85 you'll need a lot bigger!! Keep up the good work

Re: After waiting for 4+yrs....

Posted: Fri Jan 10, 2014 12:44 pm
by Altima-DET
In case you missed it... there's no E85 in Jacksonville so..... 850cc is plenty big enough! Thanks and I'm hoping to get this nailed down soon.

Re: After waiting for 4+yrs....

Posted: Sat Jan 11, 2014 7:09 am
by neverlift
Ok revhard was my thought just dont see them anymore lol

Just a heads up, chevy dealer did a test a few years back after increased rubber fuel parts failures, sure enough the ethanol content they found was in some(most) cases more than double the 10% stickers placed on the pump! highest was 24% I'll save the rant on this.. This will have an effect on tuning.

Re: After waiting for 4+yrs....

Posted: Sat Jan 11, 2014 7:15 am
by Altima-DET
I love this manifold. Its the only one I've tested that fits with the alternator so close. Tru dat about ethanol! But I just learned last night that the Sunoco on Beach Blvd here in Jax has 100 octane so I'll be getting a few gallons of gas for fun soon!

Re: After waiting for 4+yrs....

Posted: Sat Jan 11, 2014 9:10 am
by neverlift
Yeah I was going to mention the sunoco! Huffman got away with a rushed rom tune(timing a little aggressive for my taste) on that stuff, think he did a few events till his nistune came back.

we have a few non ethanol pumps around but it only comes in 89(marine grade)..

Re: After waiting for 4+yrs....

Posted: Sun Jan 12, 2014 1:32 pm
by signals13
wow nice my fiancee altima gets a lot of crap too lol.

Re: After waiting for 4+yrs....

Posted: Sun Jan 26, 2014 12:23 pm
by Altima-DET
More pix....

Relocated the HVAC controls to install gauges
Image
Image
Image

Synapse BOV
Image
Image

Fiberglass kickpanels I made 15yrs ago still looking good!
Image

Re: After waiting for 4+yrs....

Posted: Sat Feb 08, 2014 9:22 pm
by niceguy
You may be one of the few that have had their Altima longer than me lol....bought my '93 (build date of fall '92) in 2000 and still runs great but plan to retire it this year. Keep up the nice work.

Re: After waiting for 4+yrs....

Posted: Sun Feb 09, 2014 4:47 am
by Altima-DET
same here om the build date...... the owners manual still calls in a Stanza Altima lol. yes I've own this car since 1997 and its been boosted since 2000. She still has a lot of lift in her so mine isn't retiring anytime soon

Re: After waiting for 4+yrs....

Posted: Tue Mar 11, 2014 11:32 am
by Altima-DET
Altima is getting it's manifold and Turbo are out getting sandblasted and ceramic coated... Still fighting the Consult issues with the Calumsult RTv2 ECU and now I have the 240 to keep me busy as well. Will post pix after mani is cleaned up

Re: After waiting for 4+yrs....

Posted: Tue Mar 11, 2014 11:41 am
by S14wayz
was that all bird **** or tree sap lol? Looks good man glad you kept your interest up on it after that amount of time

Re: After waiting for 4+yrs....

Posted: Tue Mar 11, 2014 12:05 pm
by Altima-DET
80% bird.......... 15% tree..... 5% God only knows!

Re: After waiting for 4+yrs....

Posted: Fri Apr 25, 2014 6:51 am
by sdaigle240
hahaha wow bro u got sh|tted on. you now have a FWD KA-T and RWD KA-T.... thats pretty bossy.

Re: After waiting for 4+yrs....

Posted: Fri Apr 25, 2014 7:19 am
by Altima-DET
Rwd SR20det..... wish this Bisssh was a KA-T.... would have had less issue lol

Re: After waiting for 4+yrs....

Posted: Fri Apr 25, 2014 9:51 am
by sdaigle240
sometimes i am retarded huh. i guess i just want it to be a KA in my head.

Re: After waiting for 4+yrs....

Posted: Fri Apr 25, 2014 11:20 am
by Altima-DET
That makes 2 of us son.....

Re: After waiting for 4+yrs....

Posted: Fri Apr 25, 2014 12:35 pm
by sdaigle240
i was purty impressed in that sr at 16psi