Building a new Intake manifold.
Building a new Intake manifold.
Changed from the first manifold which is pictured in the first two pics. I'm still working on getting material thick enough to make that design with out flex, but until then this is the design I decided to go with.
https://www.facebook.com/Scunion-Fabric ... =bookmarks
https://www.facebook.com/Scunion-Fabric ... =bookmarks
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: Building a new Intake manifold.
In for updates! This is pretty rad
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
Re: Building a new Intake manifold.
Looks dope!!!! Id rock one
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
- s14fiend
- Knows Some Stuff About 240's!
- Posts: 344
- Joined: Wed Feb 09, 2005 7:53 pm
- Location: Miami, FL
Re: Building a new Intake manifold.
Looks good.
Where did you source your ka24de intake manifold head flange from?
Where did you source your ka24de intake manifold head flange from?
Re: Building a new Intake manifold.
Thanks for the compliments. I got the flange from Xccessive Mfg.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
Re: Building a new Intake manifold.
So pretty lol, make me one hahahaha
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
Re: Building a new Intake manifold.
No problem. $950 and I'll build one to suit you. Tax time is coming soon lol
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Nice mani and your setup sounds nice. Pics and dyno?
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
Re: Building a new Intake manifold.
Not yet. But I will.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Update. It's now for sale. $950 + what ever add ons you want. Any questions you can call at 910-603-9593 or PM.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Very nice. Have you test fit it under the hood yet? My only concern would be it sticking up too high for the hood to close due to the straight runners.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
- Greaser
- Master of Knowledge
- Posts: 589
- Joined: Mon Aug 23, 2004 10:24 am
- Location: chesapeake VA
- Contact:
Re: Building a new Intake manifold.
so which one is the one you are using?
because the mani in the first 2 pics are far superior to the other one.
because the mani in the first 2 pics are far superior to the other one.
Re: Building a new Intake manifold.
I have one like the first two pics on my car.Greaser wrote:so which one is the one you are using?
because the mani in the first 2 pics are far superior to the other one.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
It has good clearance from the hood. Thats not an issue.adamky wrote:Very nice. Have you test fit it under the hood yet? My only concern would be it sticking up too high for the hood to close due to the straight runners.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Cool. Nice fab work. I'm jealous.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
-
- Dont Question My Nissan Knowledge
- Posts: 597
- Joined: Sat Mar 23, 2013 9:57 am
- Location: lumberton, NC
Re: Building a new Intake manifold.
I just realized who you are.
-
- Knows Some Stuff About 240's!
- Posts: 338
- Joined: Tue Nov 08, 2011 8:22 pm
- Location: Kankakee IL
Re: Building a new Intake manifold.
This guy's legit he built my turbo manifold couldn't be happier with it. On top of him being a stand up guy and super friendly
Cam
Re: Building a new Intake manifold.
Who he is?
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
Re: Building a new Intake manifold.
That's a complex question. But just simply my name is Nathan McCoy aka Scunion Fabrication.adamky wrote:Who he is?
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
I guess the important part is that you've got some bada55 fabrication skills. I already looked through the Facebook page and everything looked fantastic.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
Re: Building a new Intake manifold.
Thank you.adamky wrote:I guess the important part is that you've got some bada55 fabrication skills. I already looked through the Facebook page and everything looked fantastic.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
So I made the flange and welded it on for the IACV.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Wicked work.
Are there any hp gains?
Are there any hp gains?
<< Yuh dun know!!
Cross......... Angry........ Miserable.........
SoundEfx up in here causing trouble......
"I'm a BAD man... BAD man doh dance..." ...... " That bam-bam is ..MINE..!! "
Re: Building a new Intake manifold.
Depends on your setup and tuning, but average gains that have been achieved are between 20-30whp with notably increased responsiveness. The customer below said he gained 21whp from the intake manifold I made him.SoundEfx wrote:Wicked work.
Are there any hp gains?
Chris Burgunder (HOON Performance) 588whp. 517 tq
28 psi on efr 7670 (51mm turbo)
Full boost from 3600-7500
Pro am drift car
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
Got a little more done. Just have to weld up the water Neck.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
-
- Dont Question My Nissan Knowledge
- Posts: 597
- Joined: Sat Mar 23, 2013 9:57 am
- Location: lumberton, NC
Re: Building a new Intake manifold.
Feel free to use my car as a test mule
Re: Building a new Intake manifold.
.
Wow these manifolds look awesome! Nice Work. About how long does it take to complete one of the manifolds shown in the pics above?
.
Wow these manifolds look awesome! Nice Work. About how long does it take to complete one of the manifolds shown in the pics above?
.
.
For SALE !!! >>http://www.ka-t.org/forums/viewtopic.ph ... 44#p537044 <<
Buildthread: http://www.ka-t.org/forums/viewtopic.ph ... 46#p537046
instagram: @cleantune / @siks_tehn_racing
For SALE !!! >>http://www.ka-t.org/forums/viewtopic.ph ... 44#p537044 <<
Buildthread: http://www.ka-t.org/forums/viewtopic.ph ... 46#p537046
instagram: @cleantune / @siks_tehn_racing
Re: Building a new Intake manifold.
6-8 weeks from order to shipment.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
Re: Building a new Intake manifold.
So this is the latest one I've finished for Hoon Performance.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
- S14wayz
- Knows Some Stuff About 240's!
- Posts: 419
- Joined: Wed Apr 24, 2013 11:11 am
- Location: BC, Canada
Re: Building a new Intake manifold.
That's a thing of beauty sir!
I really like how you extended the coolant neck
I really like how you extended the coolant neck