*Post Your Engine Bay Pics*

Custom Works · Post by **Custom Works** » Mon Aug 28, 2006 8:30 pm

Wow, it looks like you bought it from the dealer yesteday ~ SO CLEAN

s14det · Post by **s14det** » Tue Aug 29, 2006 2:09 pm

xpcgamer wrote:
s14det wrote:Here are some pics of engine and engine bay

Haveing the bov where you have settle the "popping" and "off throttle" stuttering? Mine still wont idle when cold even with the decel feature set on my SAFC.

Mine drive's fine. I have a Enthalpy tune also. Iam having some issue's of it lean at idle and going lean when starting to get into boost. But I had this same setup on my stock engine and ran like a dream.

turbo2nr · Post by **turbo2nr** » Tue Aug 29, 2006 4:00 pm

s14det what did you do to make the steel lines hook up to the z32 fuel filter.. this is a concern with my top feed setup. i was going to get a aeromotive fuel filter but if the z32 filter can work id use that.

nice clean setup btw.

s14det · Post by **s14det** » Tue Aug 29, 2006 5:30 pm

turbo2nr wrote:s14det what did you do to make the steel lines hook up to the z32 fuel filter.. this is a concern with my top feed setup. i was going to get a aeromotive fuel filter but if the z32 filter can work id use that.

nice clean setup btw.

I just used the factory Hose clamps on it.

Been using that for sometime now and seem to work just fine for me

mattmartindrift · Post by **mattmartindrift** » Tue Aug 29, 2006 6:29 pm

shots w/ the new 3076R and all AN fuel setup

turbo2nr · Post by **turbo2nr** » Tue Aug 29, 2006 7:56 pm

s14det what size an fitting you using? -8an or -6an? also is it 3/8 steel bradied hose?

Fizor · Post by **Fizor** » Tue Aug 29, 2006 8:28 pm

clean setup mattmartindrift

SleepyS-14 · Post by **SleepyS-14** » Tue Aug 29, 2006 10:51 pm

mattmartindrift- I see that you have a 3076. I was going to get that over the winter. I was wondering when does it start to spool and when does it hit 15lbs. Also what are the exact specs of the turbo(trim, A/R, ect)

mattmartindrift · Post by **mattmartindrift** » Wed Aug 30, 2006 3:50 am

it seems to be full boost for me around 3000-3300rpms.

Transient response is amazing though.

I run the non-GT T3 exhaust side w/ .63 A/R

s14det · Post by **s14det** » Wed Aug 30, 2006 8:06 pm

turbo2nr wrote:s14det what size an fitting you using? -8an or -6an? also is it 3/8 steel bradied hose?

Whatever came in the Phatka-t fuel kit.

I would think it is the same as the turbo240 fuel kit. I think it is a -6 but not sure. It is somewhat smaller the the -10 line that i use on the oil cooler.

exhaust_ed · Post by **exhaust_ed** » Sat Sep 02, 2006 6:58 pm

fromxtor · Post by **fromxtor** » Sun Sep 03, 2006 9:24 am

looking good Matt, can't wait to see out at the track wehn I get back from my deployment.

Ryencool · Post by **Ryencool** » Mon Sep 04, 2006 12:04 pm

What can I use to clean my bay? I just want to get all the dirt and grime out but I heared spraying with a water hose isnt too smart?!?

seanc · Post by **seanc** » Wed Sep 06, 2006 8:46 am

here is mine:

Lance · Post by **Lance** » Sat Sep 09, 2006 9:12 am

KansaiDrifter · Post by **KansaiDrifter** » Mon Sep 11, 2006 3:29 pm

MAN some of these baby's are lookin great i gotta show ya mine! i tihnk you'll like

Koukster · Post by **Koukster** » Mon Sep 11, 2006 3:50 pm

Wow that is really nice. Take this as you will but I really think that bay would look better if you chose a different color for the valve cover and some of the pluming. What would you think about gold or a nice shinny black like your intercooler piping and intake??? Black would also really offset that nice shinny oil cap Anyways great job and by no means was this a put-down, just a mere suggestion.

Kevin · Post by **Kevin** » Mon Sep 11, 2006 5:22 pm

Hey I remember that car from D Sport magazine a while back. Vivid Racing built it. Nice car man.

TanManS14 · Post by **TanManS14** » Mon Sep 11, 2006 5:37 pm

Koukster wrote:Wow that is really nice. Take this as you will but I really think that bay would look better if you chose a different color for the valve cover and some of the pluming. What would you think about gold or a nice shinny black like your intercooler piping and intake??? Black would also really offset that nice shinny oil cap Anyways great job and by no means was this a put-down, just a mere suggestion.

Agreed the blue readiator hozes along with the couplers and everything make it a tad bit overwhelming to the eye. Either way very clean set up and love the color of the engine bay. Original

Tanner.

exhaust_ed · Post by **exhaust_ed** » Mon Sep 11, 2006 7:37 pm

do those unorthodox lightweight pulley fit the sohcs

KansaiDrifter · Post by **KansaiDrifter** » Mon Sep 11, 2006 9:34 pm

haha it's all good! yeah i ended up buying the car a while back, it'd only been ran 3 times! everything is still new on it, i love it! I even had the Dsport when it first came out, i never imagined i'd own it!?!?! anyways, I dunno if the pulley's woul dfit sohc, i know the pump pulleys would of course, i believe the rest of them would too.. they work out great!

yeah here's a pic of my engine bay before i got this setup, wish the cover was for a ka!

Fireplug · Post by **Fireplug** » Mon Oct 30, 2006 10:26 pm

My Ka.

Edited cause no one can take a joke.

slydwayz · Post by **slydwayz** » Tue Oct 31, 2006 5:44 am

wow. i don't uhhhh....yea....Ka-t forums+engine bay pics topic=picture of the ka. prepare yourself for some flaming.

silviaks2nr · Post by **silviaks2nr** » Tue Oct 31, 2006 10:30 am

a forum staff member will just delete the picture... it has happened before in this thread. but yeah this is ka-t.org even if its a super nice sr setup

el tigre · Post by **el tigre** » Wed Nov 01, 2006 10:37 am

Fireplug wrote:My Ka.

Edited cause no one can take a joke.

Get real man, hey you may be nice and all, this just isn't the place for this kind of stuff.

Ka......... Serious business.

mestisomadness2000 · Post by **mestisomadness2000** » Fri Nov 10, 2006 2:34 pm

heres mine (current)

Doba · Post by **Doba** » Fri Nov 10, 2006 5:44 pm

yeah yeah I know, its for sale though

Turbo24sxt · Post by **Turbo24sxt** » Sat Nov 11, 2006 9:00 am

^^^^ if you take out that motor and drop in a KA-T ... you will deffinitly sell it faster!!

since well your on KA-T not SR-T ....

sweet color in engine bay!

Doba · Post by **Doba** » Sat Nov 11, 2006 9:49 am

Thanks the color is the RX8 blue, which I was going to paint my car, decided to stick with black, but i like the off color blue in the bay so im keeping it.

Im hoping to sell the SR soon, I have it in car, for local people interested to take a look, a drive just to see how well she runs. She has been good to me throughout the years.

Initial Daniel · Post by **Initial Daniel** » Sat Nov 11, 2006 10:39 am

Mannnnn. I wish my engine bay was all bling-blingin! That looks nice man. But...SR20 FTL....

jk