*Post Your Engine Bay Pics*

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

Mark Washington wrote:NPD! what is the reservoier on the hot side? PS? I just put my PS reservoier in the same place, Funny

Yup, it's the PS. Here's a different angle.

Image
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
Mark Washington
Encyclopedia-Nissan
Posts: 1004
Joined: Thu Feb 25, 2010 6:45 pm
Location: BAY AREA
Contact:

Post by Mark Washington »

It makes me feel better about the new location. It is hurtin pretty bad not being able to post pics now. I tried it with my buddys profile and he cant post pics out of my bucket either. I can post on Norcal though so I guess this forum doesn't like my PhotoBucket anymore.
速い速い シルビア ターボターボ
Its not the size of the turbo,Its how you spool it.
devnemo
Knows Some Stuff About 240's!
Posts: 415
Joined: Wed Aug 08, 2007 11:31 am
Location: gville. SC

Post by devnemo »

before. after coming in a week or so
Image
Image
BM_95_240
240sx Wannabe
Posts: 125
Joined: Thu Mar 12, 2009 8:06 pm
Location: Evansville, IN

Post by BM_95_240 »

NPD wrote:Image
Dude that is a bada** oil fill cap!! Is it home made?

and to follow the rules

Image
95' 240
Image
TinyT wrote:your cheap fmu rockin havin ass wouldnt buy these thunder sticks anyways.
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

BM_95_240 wrote:
NPD wrote:Image
Dude that is a bada** oil fill cap!! Is it home made?

and to follow the rules

Image
funny you noticed that.

nah, it's not hand made. It's an oldskool JG Engine Dynamics one I had lying around.
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
outlaw9958
Learners Permit
Posts: 10
Joined: Mon Oct 29, 2007 10:18 am

Post by outlaw9958 »

work in progress...

Image
User avatar
sloka-t
Dont Question My Nissan Knowledge
Posts: 641
Joined: Thu Nov 23, 2006 9:19 am
Location: tallahassee, FL

Post by sloka-t »

NPD wrote:Image
congrats on getting your engine in Super Street
Mechanical Engineering, Florida State University
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

sloka-t wrote:
NPD wrote:Image
congrats on getting your engine in Super Street
Thanks. Funny thing is I didn't even know they were going to use those pics. I was at the store when I found out lol.
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
Mark Washington
Encyclopedia-Nissan
Posts: 1004
Joined: Thu Feb 25, 2010 6:45 pm
Location: BAY AREA
Contact:

Post by Mark Washington »

Is that V band on the throttlebody too? Tight stuff.
速い速い シルビア ターボターボ
Its not the size of the turbo,Its how you spool it.
User avatar
TinyT
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3336
Joined: Thu Oct 12, 2006 5:55 am
Location: wisco

Post by TinyT »

Mark Washington wrote:Is that V band on the throttlebody too? Tight stuff.
wiggins clamp yo!
Image
Turbo24sxt
Forum Moderator
Posts: 1538
Joined: Sun Apr 10, 2005 4:35 pm
Location: Colorado

Post by Turbo24sxt »

xpinoyxmk wrote:Turbo24sxt, what battery is that?
Miata Battery ... Duralast gold Autozone ... 7 year warranty ... 3 year free replacement ... 90.00 or so i think with core.. lil mods needed to fit in that spot.
Anthony
***Nate Moore 480sx R.I.P ***
***Will NEVER be Forgotten***
Build Thread
viewtopic.php?t=15023&postdays=0&postorder=asc&start=0
User avatar
boostenb13
Driving Mom's Station Wagon
Posts: 22
Joined: Sun Jan 03, 2010 9:58 pm
Location: South Florida
Contact:

Post by boostenb13 »

NPD wrote:Image
Yeah motors Super clean, dont follow Super Street but bought one for that issue. Like what ya did to the valvecover too. Props on a Big Horsepower build. But been wondering what the rest of the car looks like...

My engine bay 8/24/2010:
Image

To be continued..
Autohouse Import Factory
Image
jmac636
Knows Some Stuff About 240's!
Posts: 414
Joined: Wed Aug 13, 2008 11:10 am
Location: TEXAS

Post by jmac636 »

Yeah NPD should make a picture thread with pics of the outside of the car, that would be sikk.
1995 S14 daily built block nismotronics sr20det Ecu running my ka-t, synergy green S14 5.3l turbo 240sx 1/4 mile traps 135mph on 13psi and dr's.
Holset HE341 Install thread woohoo!!
viewtopic.php?t=48692
http://www.playloudclothing.com/
User avatar
96silvia
Knows Some Stuff About 240's!
Posts: 401
Joined: Thu Nov 09, 2006 10:00 pm
Location: West Jordan Utah

Post by 96silvia »

updated pic of my engine bay with the engine:D
Image
CP pistons
Pauter x-beam rods
ARP 11mm head studs
ARP 10mm main studs
tein super drift coilovers
edfc,Blitz nur spec-r muffler
z32 5speed tranny swap
smbonn2005
Knows Some Stuff About 240's!
Posts: 469
Joined: Wed Feb 03, 2010 6:06 pm
Location: Milford, MA

Post by smbonn2005 »

NPD is that an SR CAS? Noticed you were running a COPS setup and was curious how you were getting cam/crank signal to the ECU. And love the wiggins clamps, almost never actually see them used for some reason
Killer015
Learners Permit
Posts: 19
Joined: Sat Sep 15, 2007 5:49 pm

Post by Killer015 »

Posted a little while back but I've cleaned it up since then.
Image
T2 bottom mount manifold, s14 T28, HKS 10psi Wastegate, HKS SSQ BOV, Innovate LC1 Wideband Kit, Ebay FMIC, Fidanza Flywheel, F1 Stage 3 Clutch, CXRacing Radiator, SS Brake Lines, Z32 MAF, Emance Tune + SAFC2, ARP Head Studs, Q45 Brake Upgrade
User avatar
ttr187
Learners Permit
Posts: 14
Joined: Tue Jan 23, 2007 9:58 pm
Location: Florida

Friends KA-T

Post by ttr187 »

Love looking at all these! Here's my friends S13
Image
Image
Image
User avatar
98 240sx-E
Driving Mom's Station Wagon
Posts: 21
Joined: Sun Jun 07, 2009 1:12 am
Location: south jersey

Post by 98 240sx-E »

hatch before engine swap
Image
hatch after swap
Image

coupe
Image
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

boostenb13 wrote:
NPD wrote:Image
Yeah motors Super clean, dont follow Super Street but bought one for that issue. Like what ya did to the valvecover too. Props on a Big Horsepower build. But been wondering what the rest of the car looks like...

My engine bay 8/24/2010:
Image

To be continued..
jmac636 Posted: Thu Aug 26, 2010 5:41 am Post subject:
Yeah NPD should make a picture thread with pics of the outside of the car, that would be sikk.
Thanks I will work on a pic thread of the whold car soon.
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

smbonn2005 wrote:NPD is that an SR CAS? Noticed you were running a COPS setup and was curious how you were getting cam/crank signal to the ECU. And love the wiggins clamps, almost never actually see them used for some reason
No the CAS is a s13 KA. Just removed the cap and rotor and machined a billet cover to go on instead of the distributor cap.

The wiggins are just a big dent in my wallet. LOL
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
sloka-t
Dont Question My Nissan Knowledge
Posts: 641
Joined: Thu Nov 23, 2006 9:19 am
Location: tallahassee, FL

Post by sloka-t »

yeah arent wiggins clamps like 100 bucks a piece?
Mechanical Engineering, Florida State University
koukidriver
Dont Question My Nissan Knowledge
Posts: 829
Joined: Fri Nov 20, 2009 3:12 pm
Location: Jersey

Post by koukidriver »

Here is mine : Fully built with a bottom mount set-up GT3071R


Image

Here is a video of the finished product:


Image
Last edited by koukidriver on Sun Sep 19, 2010 6:16 pm, edited 1 time in total.
User avatar
PuNcHdRuNk
Knows Some Stuff About 240's!
Posts: 375
Joined: Mon Feb 08, 2010 9:50 am
Location: richland wa

Post by PuNcHdRuNk »

Image
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

sloka-t wrote:yeah arent wiggins clamps like 100 bucks a piece?
it depends on the size. larger ones can cost more.
HKS T51R-KAI
MoTeC
802rwhp so far....
smbonn2005
Knows Some Stuff About 240's!
Posts: 469
Joined: Wed Feb 03, 2010 6:06 pm
Location: Milford, MA

Post by smbonn2005 »

NPD, is that all you are using to get crank signal to fire the coils? If you could please send me a PM on your setup it would be greatly appreciated =)
User avatar
nelson240sx
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2055
Joined: Tue Nov 08, 2005 7:32 pm
Location: Indy
Contact:

Post by nelson240sx »

Hasn't made noise yet.
Image
KA24E-T 06/06 to 10/09 (T25 then H1C Holset) - sold
KA24DE-T 12/09 to 10/11 (T4/TO4E) - sold
KA24DE-T 11/14 to 8/15 (T4/TO4S BB) - sold
SR20DE-T exo-car build 06/13 to 3/16 (EFR6758)
^ now VH45DE-T 6/16 to 10/21 (Billet T04S BB)
^now KA24DE-T 1/22 to current (EFR 7163)
Miata 1.8 turbo 9/15 to 3/17 (VF39) - sold
KA24DE-T build 8/17 to 4/19 (EFR6758) - sold
12.6:1 Turbo KA-T 4/19 to 7/21 (EFR7163) - sold
User avatar
NPD
240sx Wannabe
Posts: 101
Joined: Fri Dec 15, 2006 12:39 am

Post by NPD »

smbonn2005 wrote:NPD, is that all you are using to get crank signal to fire the coils? If you could please send me a PM on your setup it would be greatly appreciated =)
the setup is pretty simple.

Stock S13 KA CAS, Motec M800, Honda S2000 coils.
HKS T51R-KAI
MoTeC
802rwhp so far....
User avatar
Mark Washington
Encyclopedia-Nissan
Posts: 1004
Joined: Thu Feb 25, 2010 6:45 pm
Location: BAY AREA
Contact:

Post by Mark Washington »

Matt powers please post your engine bay.
速い速い シルビア ターボターボ
Its not the size of the turbo,Its how you spool it.
User avatar
Jmcc
Encyclopedia-Nissan
Posts: 1436
Joined: Wed Jul 14, 2010 5:42 pm
Location: FL

Post by Jmcc »

o well i thought i would post it

Image
User avatar
TinyT
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3336
Joined: Thu Oct 12, 2006 5:55 am
Location: wisco

Post by TinyT »

someone stole all my parts :D

Image
Image
Post Reply