*Post Your Engine Bay Pics*
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
- 1991240sxhatch
- Knows Some Stuff About 240's!
- Posts: 205
- Joined: Wed Dec 15, 2010 3:41 pm
- Location: Bristol, tn
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
TanManS14 wrote:Come on man, we all know by the time that picture is posted he's already pulled the exhaust manifold off, sold it, bought a new turbo, and swapped another intake manifold on it.
True he does change setups alot!!! At least his car doesn't seem to be down for years at a time
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
-
- Learners Permit
- Posts: 8
- Joined: Wed Jan 12, 2011 1:44 pm
- Location: Arvada, CO
Engine bay before:
Replacing head gasket
cut/clean Cylinder head
New HG
Engine after (almost done!)
Turbo needs to be re clocked to face down and I'm still debating on whether to set the maf up as draw through or blow through.
Parts List
Master Power t3/t4 50 trim (.48 a/r)
Ebay top mount manifold
Tial sports 38 mm wastegate w/ 8ps spring
Greddy rs bov
3" custom downpipe
2 1/2" IC piping with 24x12x3 front mount
Z32 maf
Sti yellow 550 cc injectors
MBC
Emance ecu (Not anymore, decided to cough over the cash for a real Enthalpy tune)
I plan on running between 11 and 13 psi and hope to make at least 300 whp.
[/img]
Replacing head gasket
cut/clean Cylinder head
New HG
Engine after (almost done!)
Turbo needs to be re clocked to face down and I'm still debating on whether to set the maf up as draw through or blow through.
Parts List
Master Power t3/t4 50 trim (.48 a/r)
Ebay top mount manifold
Tial sports 38 mm wastegate w/ 8ps spring
Greddy rs bov
3" custom downpipe
2 1/2" IC piping with 24x12x3 front mount
Z32 maf
Sti yellow 550 cc injectors
MBC
Emance ecu (Not anymore, decided to cough over the cash for a real Enthalpy tune)
I plan on running between 11 and 13 psi and hope to make at least 300 whp.
[/img]
Last edited by sik_z33 on Thu Feb 10, 2011 12:51 am, edited 1 time in total.
Daily: 2003 Super Black 350z
Project: 1991 Cherry Red Pearl Rocketship Coupe ka-t (simple n62 maf, Master power 50 Trim, 550cc STI injectors, tial 38mm, enthalpy rom tune, rest of the goodies set up)
Project: 1991 Cherry Red Pearl Rocketship Coupe ka-t (simple n62 maf, Master power 50 Trim, 550cc STI injectors, tial 38mm, enthalpy rom tune, rest of the goodies set up)
- Mark Washington
- Encyclopedia-Nissan
- Posts: 1004
- Joined: Thu Feb 25, 2010 6:45 pm
- Location: BAY AREA
- Contact:
- TinyT
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 3336
- Joined: Thu Oct 12, 2006 5:55 am
- Location: wisco
dude, copy the direct link address. click img, paste pic, click img againMark Washington wrote:http://s945.photobucket.com/albums/ad29 ... hehood.jpg
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
beat me to it tiny
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- Mark Washington
- Encyclopedia-Nissan
- Posts: 1004
- Joined: Thu Feb 25, 2010 6:45 pm
- Location: BAY AREA
- Contact:
- Mark Washington
- Encyclopedia-Nissan
- Posts: 1004
- Joined: Thu Feb 25, 2010 6:45 pm
- Location: BAY AREA
- Contact:
supakat wrote:Was that so hard.Mark Washington wrote:http://s945.photobucket.com/albums/ad29 ... hehood.jpg
you sound just like nick burns.... haha
is that your bov on the plenum?
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
-
- Dreams of owning a 240!
- Posts: 92
- Joined: Fri May 11, 2007 4:43 pm
i wanted to know cuz it look funky...i am not a big fan of swapping motors but the 2j looks sexy in the s chassis.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
-
- Forum Moderator
- Posts: 1538
- Joined: Sun Apr 10, 2005 4:35 pm
- Location: Colorado
hahaha o i know it is very messy for my standards .. it was a lets get it to the track and run the sob before winter hit ... so we did ... new pics soon enoughstreet_240sx wrote:^^^^ is that your current setup? It looks a little messy for your standard lol
^^^^ very funny ... but i will no longer be doing any of that .. this is the final setup on this car ... i got a little one and another little one on the way .. so imma just enjoy this one the way it is since it is all paid for and complete ...TanManS14 wrote:Come on man, we all know by the time that picture is posted he's already pulled the exhaust manifold off, sold it, bought a new turbo, and swapped another intake manifold on it.
Anthony
***Nate Moore 480sx R.I.P ***
***Will NEVER be Forgotten***
Build Thread
viewtopic.php?t=15023&postdays=0&postorder=asc&start=0
***Nate Moore 480sx R.I.P ***
***Will NEVER be Forgotten***
Build Thread
viewtopic.php?t=15023&postdays=0&postorder=asc&start=0
- TanManS14
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2764
- Joined: Wed Apr 26, 2006 7:28 pm
- Location: Raleigh, NC
Is that an hx40? I want to run that on a 2j as well, when do you hit full boost by with it? Got any estimate of hp/ trap speed? Nice setup.oskars13kat wrote:sorry not KA...
haha, im just bustin your balls. Why dont i ever see any vids of it man? I dont think i've ever really seen it in action. Are you on AEM now?Turbo24sxt wrote:^^^^ very funny ... but i will no longer be doing any of that .. this is the final setup on this car ... i got a little one and another little one on the way .. so imma just enjoy this one the way it is since it is all paid for and complete ...
It's always broken.
-
- Dreams of owning a 240!
- Posts: 92
- Joined: Fri May 11, 2007 4:43 pm
Is that an hx40? I want to run that on a 2j as well, when do you hit full boost by with it? Got any estimate of hp/ trap speed? Nice setup.TanManS14 wrote:oskars13kat wrote:sorry not KA...
its an hx35
@ 9psi i had a trap speed of 111mph and an et. 12.52 @ 3700ft above sea level... havent take it to the dyno yet, i will take it as soon as i get my clutch. thanks
- TanManS14
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2764
- Joined: Wed Apr 26, 2006 7:28 pm
- Location: Raleigh, NC
When do you hit full boost? Hx35 is small, but not THAT much smaller. Im just going with the hx40 because im gonna build a mani with a t4 flange. I bet that thing is really responsive on the 2j. Good trap too esp on 9psi. Thanks for the info man.
Last edited by TanManS14 on Tue Feb 01, 2011 12:39 am, edited 1 time in total.
It's always broken.
-
- Dreams of owning a 240!
- Posts: 92
- Joined: Fri May 11, 2007 4:43 pm
i get the 9psi @ roughly 3k, dont know exactly because i am always paying attention to the road lol and not the tach. since I ditched the twins i wanted an hx40 but could not find one locally so I ended up getting that hx35. Im going to run it until its max efficiency for a while and then i am going to upgrade to a s372.
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2369
- Joined: Sun Aug 12, 2007 8:24 pm
- Location: Raleigh, NC
Built KA24DE: Wiseco 9.0:1 | Eagle H Beams | ARP Head & Main Studs | BC 272s & Springs | Supertech Valves
Boost Source: Under Construction
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
Boost Source: Under Construction
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
-
- Forum Moderator
- Posts: 1538
- Joined: Sun Apr 10, 2005 4:35 pm
- Location: Colorado
haha, im just bustin your balls. Why dont i ever see any vids of it man? I dont think i've ever really seen it in action. Are you on AEM now?[/quote]Turbo24sxt wrote:^^^^ very funny ... but i will no longer be doing any of that .. this is the final setup on this car ... i got a little one and another little one on the way .. so imma just enjoy this one the way it is since it is all paid for and complete ...
im on mega squirt ... ive never really ever taken any video of it ... ill get some up once car is able to go out ... winter in colorado = no 240 for months at a time ...
Anthony
***Nate Moore 480sx R.I.P ***
***Will NEVER be Forgotten***
Build Thread
viewtopic.php?t=15023&postdays=0&postorder=asc&start=0
***Nate Moore 480sx R.I.P ***
***Will NEVER be Forgotten***
Build Thread
viewtopic.php?t=15023&postdays=0&postorder=asc&start=0
- bmitchell_ga
- Knows Some Stuff About 240's!
- Posts: 285
- Joined: Sun Feb 01, 2009 11:05 pm
- Location: South GA
That has to be the biggest rubber boot I've ever seen
97 S14
329hp 320trq @ 13psi (on pump)
? @ 18psi (corn)
my build thread
viewtopic.php?t=51532&highlight=
*--------------------------------*
E85, obd I con, Nistune, HKS hi-power exh, Fidanza flywheel, ACT 6-puck, K-Sport coilovers, Holset hy-35 turbo, Turbo Smart 38mm wastegate, HKS bov, JGS mani, mm's, & oil line kit, AMS fuel kit w/ 95pd inj's, lc-1 wb, Driveshaft Shop DS, Greddy profec b
329hp 320trq @ 13psi (on pump)
? @ 18psi (corn)
my build thread
viewtopic.php?t=51532&highlight=
*--------------------------------*
E85, obd I con, Nistune, HKS hi-power exh, Fidanza flywheel, ACT 6-puck, K-Sport coilovers, Holset hy-35 turbo, Turbo Smart 38mm wastegate, HKS bov, JGS mani, mm's, & oil line kit, AMS fuel kit w/ 95pd inj's, lc-1 wb, Driveshaft Shop DS, Greddy profec b
- redlineracer21
- 240sx Wannabe
- Posts: 100
- Joined: Tue Jun 26, 2007 9:04 pm
- Location: Glendale, AZ
- all shal perrish
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2824
- Joined: Sun Oct 22, 2006 11:01 am
- Location: liberty lake washington
im interested, that looks A LOT like r@mons old setupredlineracer21 wrote:Heres a mock up pick of my engine bay. Just finished this thing a week ago. I'm going to try and make a build thread for people that are interested on how i built the different components.
Thanks for looking.[/img]
love it
www.autovaughnperformance.com
NISTUNE EXCELLENT TUNING AT AN EXCELLENT PRICE (pm with questions regarding)
I AM ON THE HUNT FOR JWT CAM GEARS..
if you have some, pm me
NISTUNE EXCELLENT TUNING AT AN EXCELLENT PRICE (pm with questions regarding)
I AM ON THE HUNT FOR JWT CAM GEARS..
if you have some, pm me
- schmauster920
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2612
- Joined: Tue Feb 20, 2007 5:25 pm
- Location: CA