My front facing manifold..
My front facing manifold..
I started building a manifold for my Altima and it didn't occur to me to open up a thread on it here, but I guess it's never too late even though I'm almost done with it. I'll post some pics so you guys can see the progress..
Lol.. That gap does look bad in that pic, but I did fix it after wards and is now fully welded.I've been doing fab work on cars for about 4 years and this is my first exhaust manifold.. It's tidious work!!!TinyT wrote:looks descent, have you made many manifolds? that gap in the last pic is a little scary
what turbo is that?
The turbo seen in the pics is just for mock up, it's an old Innovative turbo.
-
- Knows Some Stuff About 240's!
- Posts: 465
- Joined: Sat Jul 07, 2007 11:35 am
- Location: North Jersey
-
- Driving Mom's Station Wagon
- Posts: 43
- Joined: Mon Aug 18, 2008 1:52 am
- Location: NEW YORK
- Contact:
-
- Driving Mom's Station Wagon
- Posts: 43
- Joined: Mon Aug 18, 2008 1:52 am
- Location: NEW YORK
- Contact:
- RedAggie03
- Learners Permit
- Posts: 9
- Joined: Wed Apr 27, 2011 8:44 am
- Location: Houston, Texas
- nelson240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2055
- Joined: Tue Nov 08, 2005 7:32 pm
- Location: Indy
- Contact:
what size wastegate is going on that thing? 60mm? That elbow coming off is huge
KA24E-T 06/06 to 10/09 (T25 then H1C Holset) - sold
KA24DE-T 12/09 to 10/11 (T4/TO4E) - sold
KA24DE-T 11/14 to 8/15 (T4/TO4S BB) - sold
SR20DE-T exo-car build 06/13 to 3/16 (EFR6758)
^ now VH45DE-T 6/16 to 10/21 (Billet T04S BB)
^now KA24DE-T 1/22 to current (EFR 7163)
Miata 1.8 turbo 9/15 to 3/17 (VF39) - sold
KA24DE-T build 8/17 to 4/19 (EFR6758) - sold
12.6:1 Turbo KA-T 4/19 to 7/21 (EFR7163) - sold
KA24DE-T 12/09 to 10/11 (T4/TO4E) - sold
KA24DE-T 11/14 to 8/15 (T4/TO4S BB) - sold
SR20DE-T exo-car build 06/13 to 3/16 (EFR6758)
^ now VH45DE-T 6/16 to 10/21 (Billet T04S BB)
^now KA24DE-T 1/22 to current (EFR 7163)
Miata 1.8 turbo 9/15 to 3/17 (VF39) - sold
KA24DE-T build 8/17 to 4/19 (EFR6758) - sold
12.6:1 Turbo KA-T 4/19 to 7/21 (EFR7163) - sold
-
- 240sx Wannabe
- Posts: 199
- Joined: Mon Nov 22, 2010 12:58 am
Nice setup! I have the very same setup on my evo and dsm. Are you going to run a civic "style" half-sized radiator? Keep us update on your coolant temps if you do. I've thought about running a half radiator in my 240 but havent really seen it done.
80mm HKS Hi-Power exhaust w/test pipe, Nistune, JGS starter turbo kit, JGS Wastegate w/7 lbs spring, DeatschWerks 810cc, Turbonetics .50 trim T3/T04E w/.48 A/R turbine housing, ETS intercooler kit, Kelford Stage 1 256/264 cams, Z32 MAF, Innovate LC-1 wideband, Walbro 255LPH fuel pump.