exhaust flange
exhaust flange
sorry if repost. need blueprints of ka24de exhaust manifold flange
Wow, your first post is a possible repost... have you even tried google? Or the search button in the uper corner of every page? it literally took me 3 minutes searching this forum to find it.
Its there... search.
Its there... search.
"Build it, have fun with it, break it, and rebuild it." Brian Parker
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Ya.... Or you can send him the link to where the blueprints for the exhaust manifold are?sil-coupe wrote:Wow, your first post is a possible repost... have you even tried google? Or the search button in the uper corner of every page? it literally took me 3 minutes searching this forum to find it.
Its there... search.
I looked also, but haven't found anything.
To op: make a introduction thread, it might lighten some people's moods.
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
broaden your search... use words that are close or relitive to what youre after. CAD, SPECS, MEASUREMENTS...ETC.
viewtopic.php?t=2726&highlight=ka24de+e ... flange+cad
viewtopic.php?t=2726&highlight=ka24de+e ... flange+cad
"Build it, have fun with it, break it, and rebuild it." Brian Parker
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Did you actually read that post? There are no specs for the flange on that post.
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Yes i did, the specs are not posted. However, the means to get them are there. The info provided is enough for him to pm the guy with the file. Yeah he might have to work a little to get it but the world isnt always full of hand outs and freebies. If you dont have to work for it there's generally no appreciation in the end result.
"Build it, have fun with it, break it, and rebuild it." Brian Parker
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
"Shiny fittings are for ricers, race cars have zip ties and hose clamps." Barton Black
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Very true.sil-coupe wrote: he might have to work a little to get it but the world isnt always full of hand outs and freebies. If you dont have to work for it there's generally no appreciation in the end result.
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
- Walperstyle
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2517
- Joined: Sat Jun 21, 2008 2:32 pm
- Location: Red Deer
-
- Knows Some Stuff About 240's!
- Posts: 338
- Joined: Tue Nov 08, 2011 8:22 pm
- Location: Kankakee IL
-
- Dont Question My Nissan Knowledge
- Posts: 530
- Joined: Wed Nov 07, 2007 2:32 pm
- Location: Cincinnati
Why does everyone want the CAD file of his when they're so readily available and cost effective?
Heck even the mazwork one is only $60 and they come with gaskets.
http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40
Xcessive also has one for $65
http://www.xcessivemanufacturing.com/on ... 116&step=4
Heck even the mazwork one is only $60 and they come with gaskets.
http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40
Xcessive also has one for $65
http://www.xcessivemanufacturing.com/on ... 116&step=4
2012 - S14 KA, Nismotronic, GTi-R T28 12psi, Meth, PSM HMIC, DW550cc, N62, S15 HLSD, Spec 3, Fidanza = 12.4 @ 110
2013 - 9.0 Wiseco/Manley, Nismotronic, GT2876R 23psi, Meth, PSM HMIC, 850cc, N62, S15 HLSD, Z32 Spec 3, D21 Fidanza = ??.? @ ??? 440whp/380wtq
YouTube Channel -> http://goo.gl/MZ5EE
-
- Learners Permit
- Posts: 14
- Joined: Sat Feb 23, 2008 8:32 am
- Location: HOUSTON
Re: exhaust flange
what ive been meaning to do is market a exhaust flange with about an inch of runner machined onto it. inthat inch have the inside go from the ports shape to round. because most of hte flanges i see have that happening within a 1/2" or so...i figure it would not only flow better, but take away stress at the flange...