Thoughts and suggestions on my setup?

Share ideas/designs/theories/tips/development:
(manifolds, chassis, personal projects, MIG, TIG, etc)
Post Reply
User avatar
mc240sx
Learners Permit
Posts: 17
Joined: Wed Jul 06, 2011 9:58 pm

Thoughts and suggestions on my setup?

Post by mc240sx »

So this is a pic of my 95' KA-T. I'm using 10.5/1 pistons with Crower rods, Cosworth head gasket, super tech ss nitride 0.5mm oversize Intake valves, inconel 0.7mm exh valves, Crower 280 cams. The exhaust and intake manifolds and plumbing were made by me. The ecu is an ems4 controlling FIC 2150cc flowing e85. No dyno #'s yet. Still need to get a real turbo.
KA24det
wiseco 10.5:1
FIC 2150's on E85
Crower con rods
Crower 280 cams
JWT cam gears
Clevite bearings
Cosworth HG
625+ 11mm head studs
Scunion Fabrication Exh. & Intake manifold
kacam24det
Knows Some Stuff About 240's!
Posts: 338
Joined: Tue Nov 08, 2011 8:22 pm
Location: Kankakee IL

Re: Thoughts and suggestions on my setup?

Post by kacam24det »

where is the picture
Cam
Post Reply