trubo trucks and 1/4 mile times
trubo trucks and 1/4 mile times
What kind of times are yall getting out of a truck with 5to6 psi boost. working on turboing my frontier trying to get a idea what to expect
-
- Driving Mom's Station Wagon
- Posts: 33
- Joined: Sun Mar 22, 2009 12:49 pm
- Location: washington
Re: trubo trucks and 1/4 mile times
i had a single ka completley stock and ran the cx racing turbo kit on my 95 hardbody and did a 13.7 at 98 mph with a 2something 60foot on dragradials was pretty fun would be better with a tune and bigger injectorsRebel5943 wrote:What kind of times are yall getting out of a truck with 5to6 psi boost. working on turboing my frontier trying to get a idea what to expect
tropicilluzion
-
- Driving Mom's Station Wagon
- Posts: 33
- Joined: Sun Mar 22, 2009 12:49 pm
- Location: washington
i was at 7lbs and a walbro 255 pump thats about it cx kit said it'll do 230 something at the wheels with their kit with stock ecu injectors and maf i do not know about the horsepower on my truck cause i had about 150,xxx some miles on my motor but it pulled pretty hard i pull on my buddys stock sr20det on the freeway though going 60mph on 4th gear it was a hardbody tooRebel5943 wrote:How much boost were u running and what did you do about fuel increase?
tropicilluzion
-
- Driving Mom's Station Wagon
- Posts: 33
- Joined: Sun Mar 22, 2009 12:49 pm
- Location: washington
-
- Driving Mom's Station Wagon
- Posts: 33
- Joined: Sun Mar 22, 2009 12:49 pm
- Location: washington
sorry for late response but it was a single k and a cx racing turbo kit 240 intake intake manifold and maf didnt have any issues with insatall just patince and time no body mods jus the front core support chopping it up a little for fmic i guess preference works here cause diffrent strokes for diffrent folks on the way to mount ur fmiceksavior wrote:tropicilluzion, can you give me some more info on your setup? what parts did you use, what kind of problems, if any, did you run into during your build, any body mods you had to make, basically any info/advice you can give to somebody who's going to start a harbody turbo build.
tropicilluzion
- schmauster920
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2612
- Joined: Tue Feb 20, 2007 5:25 pm
- Location: CA
Sorry to chime in late
This was at qualcom in San Diego about a year ago.. I know its not 1/4 mile but you get the idea. First time at the track or they would likely be more consistent
1/8th mile with 4psi and no IC... NO traction in first, barely any in 2nd.. didnt warm up the street tires
60ft
2.681 10.546 70.42
2.660 10.517 66.86
2.733 10.569 69.33
2.680 10.541 70.42
This was at qualcom in San Diego about a year ago.. I know its not 1/4 mile but you get the idea. First time at the track or they would likely be more consistent
1/8th mile with 4psi and no IC... NO traction in first, barely any in 2nd.. didnt warm up the street tires
60ft
2.681 10.546 70.42
2.660 10.517 66.86
2.733 10.569 69.33
2.680 10.541 70.42
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
- rn240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1703
- Joined: Wed Nov 24, 2004 10:36 pm
- Location: Orlando, Florida
- Contact:
Re: trubo trucks and 1/4 mile times
ahh a local guy... Where abouts are you in orlando..??Rebel5943 wrote:What kind of times are yall getting out of a truck with 5to6 psi boost. working on turboing my frontier trying to get a idea what to expect
ive got a frontier and 240sx..
www.shopboldimpressions.com
98 240sx KA-T Full built motor JWT ecu 60-1 turbo 10 lbs
14 Genesis Coupe 2.0T stock turbo w/Bolt ons
98 Supra MKIV stock twins w/Bolt-ons
2012 Frontier V6, 4-door, 6ft bed (Daily Driver)
09 Ninja ZX-6R, Full exhaust, K&N pod filters
06 Suzuki Boulevard S40
/\ all still current 8.30.20
98 240sx KA-T Full built motor JWT ecu 60-1 turbo 10 lbs
14 Genesis Coupe 2.0T stock turbo w/Bolt ons
98 Supra MKIV stock twins w/Bolt-ons
2012 Frontier V6, 4-door, 6ft bed (Daily Driver)
09 Ninja ZX-6R, Full exhaust, K&N pod filters
06 Suzuki Boulevard S40
/\ all still current 8.30.20