Build Your Block: Engine Internal Master Price Sheet

www.realstreetperformance.com
Post Reply
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Build Your Block: Engine Internal Master Price Sheet

Post by RealStreet »

We are Real Street Performance RSrace.com

We are a new vendor to this community, but have been serving the KA24DE community for a long time. A lot of this board's members are using engine setups purchased with us through our ebay store or directly with one of our helpful staff. We specialize in engine internals and have put together this engine build thread for those of you looking to build your engines. I will list a lot of the bottom end parts we have for sale in this thread, if you need something that isnt shown here please PM me for an immediate response. OR please call us at 407-695-7223 and make sure to let us know you are from ka-t.org You can also IM us on AIM at TommyAtRSP or on MSN with tommy@realstreetperformance.com which is also our direct email.

http://www.RealStreetPerformance.com
Phone1: 407-695-7223
AIM: TommyAtRSP
Email: Tommy@RealStreetPerformance.com
MSN: Tommy@RealStreetPerformance.com

To place a order you can email, call, or PM us.

Shipping
Within the continental US : FREE

For anywhere else please contact us. We ship worldwide DAILY.

Here we go...

----------------------------------------------------------------------------
PISTONS
----------------------------------------------------------------------------

Image
Wiseco Forged Pistons - $509.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)

Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1

K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1



----------------------------------------------------------------------------

Image
JE Forged Pistons - $569.99
(Comes with Rings, Pins, and Locks)

Part Numbers:

244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1



----------------------------------------------------------------------------


Image
CP Forged Pistons - $621.80
(Comes with Rings, Pins, and Locks)

Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1



----------------------------------------------------------------------------
CONNECTING RODS
----------------------------------------------------------------------------
Image
Eagle H Beam Rods - $349.99

Part Numbers:
CRS6496N3D



----------------------------------------------------------------------------

----------------------------------------------------------------------------

Image
Brian Crower H Beam Rods - $395.76

Part Numbers:
BC6219
OR
BC6218 WITH CUSTOM AGE 625+ ROD BOLT UPGRADE $599



---------------------------------------------------------------------

Image
Manley I Beam Turbo Tuff Rods - $769.99

Part Numbers:
14401-4



---------------------------------------------------------------------

----------------------------------------------------------------------------
PISTON & ROD COMBO SPECIALS
----------------------------------------------------------------------------

Image
Wiseco Forged Pistons w/ Eagle H Beam Rods - $779.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)

Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1

K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
CRS6496N3D



----------------------------------------------------------------------------

----------------------------------------------------------------------------

Image
CP Forged Pistons w/ Eagle H Beam Rods - $819.99

Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
CRS6496N3D



----------------------------------------------------------------------------

Image
JE Forged Pistons w/ Eagle H Beam Rods - $799.99

Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1

Rod Part Numbers:
CRS6496N3D



----------------------------------------------------------------------------

Image
Wiseco Forged Pistons w/ Pauter X Beam 1000hp Rods - $1289.99

Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1

K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1

Rod Part Numbers:
NIS-210-530-1650F



----------------------------------------------------------------------------

Image
CP Forged Pistons w/ Pauter X Beam 1000hp Rods - $1309.99

Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1

Rod Part Numbers:
NIS-210-530-1650F



-------------------------------------------------------------------

Image
JE Forged Pistons w/ Pauter X Beam 1000hp Rods - $1319.99

Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1

Rod Part Numbers:
NIS-210-530-1650F



---------------------------------------------------------------------

Image
Wiseco Forged Pistons w/ Brian Crower Rods - $839.99

Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1

K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1

Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250



-------------------------------------------------------------------

Image
JE Forged Pistons w/ Brian Crower Rods - $899.99

Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1

Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250



---------------------------------------------------------------------

Image
CP Forged Pistons w/ Brian Crower Rods - $875

Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1

Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250



-----------------------------------------------------------------'

Image
CP Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99

Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1

Rod Part Numbers:
14401-4



----------------------------------------------------------------

Image
Wiseco Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1175.99

Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1

K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1

Rod Part Numbers:
14401-4



-------------------------------------------------------------------

Image
JE Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99

Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1

Rod Part Numbers:
14401-4




----------------------------------------------------------------------------
BEARINGS
----------------------------------------------------------------------------
Image
ACL Duraglide Performance Bearings (Rod/Main)- $99.99




----------------------------------------------------------------------------
FASTENERS
----------------------------------------------------------------------------
Image
ARP Headstuds - $149.99





Image
ARP Mainstuds - $119.99

Our Main stud kits do include the 3 extra longer studs you will need.
Last edited by RealStreet on Fri Jun 15, 2012 1:29 pm, edited 2 times in total.
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100
Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:

Post by tom550 »

...
Last edited by tom550 on Sat Mar 06, 2010 7:44 am, edited 1 time in total.
Image
User avatar
nissanfanatic
SuperMod
Posts: 5078
Joined: Sat Nov 20, 2004 1:16 pm

Post by nissanfanatic »

Would this happen to be Mark? This is Cory from INTMO/Gainesville.
-Cory

2020 Subaru WRX
A long time ago...
https://www.ka-t.org/cory_b.php
Use Linux...
User avatar
240-kid
Dont Question My Nissan Knowledge
Posts: 519
Joined: Mon Apr 26, 2004 2:41 pm
Location: East, Hawaii
Contact:

Post by 240-kid »

Wow, those are some great deals you got there...
Image
User avatar
LuSt4Boost
Driving Mom's Station Wagon
Posts: 40
Joined: Thu Dec 10, 2009 3:45 pm
Location: Largo, MD

Post by LuSt4Boost »

Is that special still going on for the Wiseco Pistons/Eagle Rods combo? I clicked the link you have posted and the price says $749.
I live for boost!
klattr1
Forum Moderator
Posts: 3724
Joined: Mon Feb 02, 2004 10:22 pm
Location: Charlotte, NC
Contact:

Post by klattr1 »

just bought CP pistons and Manley turbo tuff rods (w/ upgraded ARP 625+ rod bolts) from RSP for my drag car...can't wait to get that motor together :D

Thanks guys,
Ryan
project-D
Dreams of owning a 240!
Posts: 61
Joined: Wed Feb 18, 2009 8:30 am
Location: somewhere in nj sidewayz

Post by project-D »

i thought on the je main website the 11.0.1 were 20"over sized not 40
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

You are right that was a typo.
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Thanks for the business guys!
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Thanks for the business guys
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
katrecipe
**BANNED**
Posts: 288
Joined: Sun Nov 23, 2008 6:50 pm
Location: B A N N E D

Post by katrecipe »

Awesome deals things are up front.. I am going too have to keep an eye on this
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
koukidriver
Dont Question My Nissan Knowledge
Posts: 829
Joined: Fri Nov 20, 2009 3:12 pm
Location: Jersey

Post by koukidriver »

I see that CP pistons cost more the JE pistons but when you compare the pricing for the combo with Pauter X beam rods the JE combo verus the CP combo it the JE combo that costs more. Also in the Pauter I beam combo the pricing is the same.If the pistons cost are different and the rods are the same rods for both combos the difference in piston cost should be seen in the combo prices. I don't get it. Why would a more expensive pistons set cost more on its own and then less in a combo and why would a less expensive piston set cost less on its own and more in a combo when the rods are exactly the same for both ? Please explain. I'm sure its an error of some sort.
CP pistons-$592.20

JE pistons-$549.99

Combo with Pauter X-beam rods
with:
CP pistons-$1,219.99

JE pistons-$1,239.99
drunknmunky
Knows Some Stuff About 240's!
Posts: 448
Joined: Sat Oct 08, 2005 2:13 pm

Post by drunknmunky »

Can I get a shipping quotation for the ARP main studs to Toronto?

373 Front St. West Unit 702
Toronto Ontario
M5V3R7

Are you guys flexible on brokage? ie: delivery of item as 'gift' or under '20 dollar value'??
User avatar
sicks13
Dont Question My Nissan Knowledge
Posts: 607
Joined: Wed Oct 11, 2006 12:56 pm
Location: W.N.C

Post by sicks13 »

Over the last couple weeks I have ordered almost everything from you guys.... I really like the customer service and prompt shipping... Keep up the good work..
Image
Bubba
Knows Some Stuff About 240's!
Posts: 360
Joined: Sun Oct 08, 2006 9:06 pm
Location: Biloxi, MS
Contact:

Post by Bubba »

I've got my tuner using you guys for parts ever since I showed them your prices.
Keep up the good work.
My car is dead stock.... ish

http://mobileimports.freeforums.org
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Thank you guys for the business.
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
Alonso
Dont Question My Nissan Knowledge
Posts: 759
Joined: Tue Jun 16, 2009 3:16 pm
Location: Wichita,KS

Post by Alonso »

RSP - good people!

I got my billet turbo, WG's and BC valvetrain parts from them!
Billet PTE 6765 divided T4, Nismotronic, Speed density, Coil on plug conversion.

AWS D17.1 certified ;)
Follow me on Instagram: @alonso240
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Use Coupon code TOM2012 for your discount. Call for package prices 407-695-7223
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Thank you for your business. PM me for specials
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

Let us know if you guys need anything guys!
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

All PMs replied
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
User avatar
RealStreet
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 57
Joined: Wed Jan 06, 2010 4:47 pm
Location: Longwood, FL
Contact:

Post by RealStreet »

New Poster, Same great deals and service! Hello all my name is Prince here at Real Street and I am happy to be able to help everyone reach their motor building goals. Post here for quotes and PM for deals!

8)
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
Post Reply