*NOTICE about this section - What's "advanced"?

Advanced discussion of improving KA-T components
Post Reply
klattr1
Forum Moderator
Posts: 3724
Joined: Mon Feb 02, 2004 10:22 pm
Location: Charlotte, NC
Contact:

*NOTICE about this section - What's "advanced"?

Post by klattr1 »

ive been noticing ALOT of "non-advanced" threads being posted in this section...

so in order to keep this section "advanced", please post in the proper section...

if you are in question whether your thread is advanced or not, then you prolly need to post it in the KA-T Basic section...threads like "my car wont start" and such are not advanced and dont belong in here...

An example of a good "advanced" thread, if you are wondering is:

viewtopic.php?t=17186

and more people should be starting advanced threads like this...its what keeps people coming here/staying here...SO DONT BE AFRAID to start threads like that, cuz before you know, it might turn into a 3-4 page advanced discussion. Just make sure its relevant to the section...
Last edited by klattr1 on Thu Oct 19, 2006 5:37 am, edited 2 times in total.
duncan351
KA-T.org Featured Ride
KA-T.org Featured Ride
Posts: 890
Joined: Fri Mar 26, 2004 12:55 am
Location: Denton, TX
Contact:

Post by duncan351 »

Thankyou!!!
843whp @ 40psi
761/596 Tq 33psi 6766
http://www.enginerebuild.net
"Anyone can make power but how long can you make it last?"
wildbama37
Dont Question My Nissan Knowledge
Posts: 633
Joined: Mon Mar 06, 2006 1:13 pm
Location: Kingsport, TN

Post by wildbama37 »

Thank you too from down here in TENN. Ya, I love reading things that are actually considered to be more technical in nature that lots of people can contribute too..just makes for a better 'advanced' environment and keeps people from having to sift through threads that really shouldn't be here.

Thanks
98 240sx
06 Lamborghini Gallardo
02 Mitsubishi Montero Sport
99 Infiniti QX-4
07 Suzuki gsxr-600

Image
neoamd
Dreams of owning a 240!
Posts: 94
Joined: Wed Apr 13, 2005 7:13 pm
Location: Montgomery

Post by neoamd »

wildbama37 wrote:Thank you too from down here in TENN. Ya, I love reading things that are actually considered to be more technical in nature that lots of people can contribute too..just makes for a better 'advanced' environment and keeps people from having to sift through threads that really shouldn't be here.

Thanks
Bama sucks, Gators FTMFW :twisted:
1993 Mazda RX-7
Getting a makeover.

Member of the Jack Stands club.
Craving4Boost
Knows Some Stuff About 240's!
Posts: 340
Joined: Sun May 15, 2005 11:54 am
Location: San Francisco, CA

Post by Craving4Boost »

That still doesn't help me where to post my SR vs. KA-T thread :wink:
halftherotatingmasska
Knows Some Stuff About 240's!
Posts: 326
Joined: Mon Feb 13, 2006 10:11 pm
Location: South Florida

Post by halftherotatingmasska »

+ 1 thankyou !!! :P
Powered by a 57 trim, strapped to a JGS Manifold, and controlled by an AEM EMS. ~ 312 whp 316 ft. lbs. @ 13psi.... DIY is the best way to go!
User avatar
240racr
Knows Some Stuff About 240's!
Posts: 460
Joined: Mon Feb 06, 2006 8:10 pm
Location: Oregon

Post by 240racr »

Thank you sooooo much!!!!!
Supertech pistons (10.5:1), eagle rods,
cometic headgasket
Precision T3/T4
mild p&p, pdm tri-flow turbo cams, custom exhaust, ETS mani and dump
Fully balanced rotating assembly, ACT clutch
AMS Fuel Kit (65lb injectors), meth/water injection, ebay fmic,
elec fans, z32 brakes, AEM EMS
360WHP
User avatar
turbonola
Encyclopedia-Nissan
Posts: 1234
Joined: Sat Oct 22, 2005 6:07 pm
Location: Metairie, La.
Contact:

Post by turbonola »

what turbo should i run with my T25 setup :shock: . lol, j/k. i like to read the advanced section when i can learn new things like the "example" thread. keep up the good work klattr1, jgs, etc.
Image
11.65@118 1.64 60ft
User avatar
240racr
Knows Some Stuff About 240's!
Posts: 460
Joined: Mon Feb 06, 2006 8:10 pm
Location: Oregon

Post by 240racr »

This should be stickied be cause it will get lost in the shuffle and the problem will return.
Supertech pistons (10.5:1), eagle rods,
cometic headgasket
Precision T3/T4
mild p&p, pdm tri-flow turbo cams, custom exhaust, ETS mani and dump
Fully balanced rotating assembly, ACT clutch
AMS Fuel Kit (65lb injectors), meth/water injection, ebay fmic,
elec fans, z32 brakes, AEM EMS
360WHP
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

bump for justice!
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
Post Reply