NEW VIDEO 25psi and some fly-by's!
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
NEW VIDEO 25psi and some fly-by's!
Went out and tuned my car to run on 25psi with some 110 octane! She ran like a beast!
Let me know what you guys think!
http://www.youtube.com/watch?v=j-FmrzZC1i8
Let me know what you guys think!
http://www.youtube.com/watch?v=j-FmrzZC1i8
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
oh dear god! please help me with my truboost, lol pm'in ya! lots o lol's in that vid, car looks soo good.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 3161
- Joined: Wed Apr 18, 2007 7:28 pm
- Location: Fort WaltonBeach FL.
ya car looks awsome and fast too.
arias 8.8.1,615 tomie inj.,clevite bearings,arp 10mm hs,z32 maf,jwt ecu,intake butterflies removed,all emissions removed,cx rad. dif dual fan controller,altima dual fans,fidanza fw,stage 3 clutch,solid d shaft,j30 rearend,energy suspension bushings,kyb struts,155 lbs weight reduction.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 3161
- Joined: Wed Apr 18, 2007 7:28 pm
- Location: Fort WaltonBeach FL.
ya car looks awsome and fast too.
arias 8.8.1,615 tomie inj.,clevite bearings,arp 10mm hs,z32 maf,jwt ecu,intake butterflies removed,all emissions removed,cx rad. dif dual fan controller,altima dual fans,fidanza fw,stage 3 clutch,solid d shaft,j30 rearend,energy suspension bushings,kyb struts,155 lbs weight reduction.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
- eazye2000
- Encyclopedia-Nissan
- Posts: 1358
- Joined: Tue Jan 16, 2007 4:32 am
- Location: Inverness, FL
- Contact:
Clean vid, and clean car, too. Not too shabby!
I have no idea what to guess the power at. You said thanks to EFI in your vid, I take it you have their ECU? Maybe tuned conservatively at 25psi, I'm gonna say 380-400 to the wheels?
I have no idea. I have never dyno'd my car over 20psi, nor ran it at the track due to being afraid of breaking something. I've only done some 3rd-5th gear pulls at 25-28psi and I was scared. lol
But at 20psi, I think I had 360whp.
I have no idea what I'm saying.
I have no idea what to guess the power at. You said thanks to EFI in your vid, I take it you have their ECU? Maybe tuned conservatively at 25psi, I'm gonna say 380-400 to the wheels?
I have no idea. I have never dyno'd my car over 20psi, nor ran it at the track due to being afraid of breaking something. I've only done some 3rd-5th gear pulls at 25-28psi and I was scared. lol
But at 20psi, I think I had 360whp.
I have no idea what I'm saying.
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
I have never dynoed her (yet at least) but I believe she is making around 450 on 25psi with a EFI tune. Going with a different set-up here soon though, and Nistune, trying to break 650 on dyno...
By the way, the oil being burned is coming from underneath my car. My Oil feed line scraped on the road and spilled oil all over my exhaust and tranny....
By the way, the oil being burned is coming from underneath my car. My Oil feed line scraped on the road and spilled oil all over my exhaust and tranny....
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
damn, and i was feeling better about my car puffin.....
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
- redpotatoes
- Dont Question My Nissan Knowledge
- Posts: 823
- Joined: Thu Jun 09, 2005 6:19 am
- Location: Qc
I really like how you installed your wideband display. Clean and simple. Can I get more info on that unit?
KA24DET GT2871R .86 Setup:
viewtopic.php?t=44222
viewtopic.php?t=44222
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
I have a few movies on YouTube... love the Supra kill, but except that no. Actually out of town on a job in good ol' Mexico!xpinoyxmk wrote:Thought thats what you were making.
No more kills though?
Yea, the best thing I love about my car. It's an old system PLX M-300, I'm pretty sure that's the model number and it's just set-up normally except the cluster was removed and took apart same with the PLX and then a little cut out and that's itredpotatoes wrote:I really like how you installed your wideband display. Clean and simple. Can I get more info on that unit?
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
-
- Encyclopedia-Nissan
- Posts: 1165
- Joined: Sat Feb 02, 2008 3:46 pm
- Location: northern nj
-
- Encyclopedia-Nissan
- Posts: 1165
- Joined: Sat Feb 02, 2008 3:46 pm
- Location: northern nj
-
- Knows Some Stuff About 240's!
- Posts: 415
- Joined: Wed Aug 08, 2007 11:31 am
- Location: gville. SC
. The tune is for 93 octane but he just runs 110 when he runs high boost, and fine tunes withe safc, and lower the gap on his plugs. And he knows he can make 650 on the 20g, I think he is still set on the pt6262240tuned91 wrote:so the efi tune is just for pump or u had them tune for 10 octane? because im pretty sure they can tune for 93 and you can add more octane howveer u just cant go lower octane then they tune for. 25psi on pump is pushing it how are you not scared somethings gonna pop. i dont even see a knock lite
Hey, what does EFI charge to tune?
If I recall it isn't a lot. If you've seen the thread in my sig, you can see why I'm interested in ka-t members promoting an alternative low-cost romtuner with better rep.
If I recall it isn't a lot. If you've seen the thread in my sig, you can see why I'm interested in ka-t members promoting an alternative low-cost romtuner with better rep.
http://www.areasoundmusic.com
*Nistune/Calum ECU tuning advisor
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
WARNING: Emance is now using an alias as ECUTUNERGUY and REFLASHPROS. Spread the word.
*Nistune/Calum ECU tuning advisor
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
WARNING: Emance is now using an alias as ECUTUNERGUY and REFLASHPROS. Spread the word.
-
- Encyclopedia-Nissan
- Posts: 1165
- Joined: Sat Feb 02, 2008 3:46 pm
- Location: northern nj
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
I think Devnom meant I CAN'T make 650whp with the 20G I think I am really close to maxing out the 20G! it pulls like crazy all the way to red line, which is nice!240tuned91 wrote:650 on a 20g.. 20g is almost the same size as a 50trim t3/t4 just with a better flowing intake housing. i also have a bigger 20g cause the nut on the turbine shaft got snapped and they only make a bigger one so it had to be bored out. you mean 650 on e85 right?
I'm hoping to be making 450whp on 25psi and I'm running 110 octane to keep knock to a minimum and no I don't have a knock lite. On 18psi I'm pretty certain everything seems to be optimal!
Thanks for all the comments!
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
EFI tune costs me $400, and you have to ship him your ECU, which now he lives in Switzerland, so he says on his website about 3 weeks turn around time. Guy is really reliable though, had no problems at all with him. When I had a question, he was quick in replying and he gives you his cell phone #, so you can text or call him anytime. The tune itself is good, however, I was the first car he tuned for Z32 MAF 550cc and 750cc when I upgraded. Idle is not the best, and WOT is a little rich (guess he's just trying to be conservative). With a SAFC you can fine tune his tune and make the tune be practically perfect. I run 12psi daily with 18psi low boost and 25 high boost and have had no problem at all. I ran his 550cc tune for over a year and the new 750cc for almost a year now with no problems at all, and making close to 450whp!8-bit wrote:Hey, what does EFI charge to tune?
If I recall it isn't a lot. If you've seen the thread in my sig, you can see why I'm interested in ka-t members promoting an alternative low-cost romtuner with better rep.
I would recommend this guy highly, and I think devnon has also had a tune from him with no problems.
His website is:
http://www.efispecialist.com/store/index.php
Hope this helps....
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
-
- Encyclopedia-Nissan
- Posts: 1165
- Joined: Sat Feb 02, 2008 3:46 pm
- Location: northern nj
-
- Knows Some Stuff About 240's!
- Posts: 417
- Joined: Sun Sep 23, 2007 7:56 pm
- Location: G-Vegas
I also heard JWT has good mail order tunes. They are however a little more, but not much. My friend ran JWT tune for 550cc for over 2 years with no problem at all.240tuned91 wrote:jim wolf also is very good at mail order tune. im happy with my ford maf i hate nissa maf. however everyone does seem to like efi. you have nay pics of ur custom manifold well greddy with wastgetae flange wleded on
No I don't have any pics of my mani, but I am putting on a fully build head hopefully next week and then I will make sure to take some pics for you..
Back on the road since March 5th, 2008 . Love Boosting again!
Under construction! 25psi?? December 2010
25psi reached! July 2011
Under construction! 25psi?? December 2010
25psi reached! July 2011
- k12ispl
- Knows Some Stuff About 240's!
- Posts: 247
- Joined: Mon Mar 31, 2008 4:05 pm
- Location: Lenoir City TN
Sweet video and awesome s14
1993 240sx Coupe 5 Speed
*'91 Ka Rebuild w/ stock internals
*Stage 1 clutch
*Lightweight Flywheel
^July'12-Traded for a '03 zx6r 636
1969 Datsun 1600 Roadster Build
viewtopic.php?t=52915
www.intercarofknoxville.com
*'91 Ka Rebuild w/ stock internals
*Stage 1 clutch
*Lightweight Flywheel
^July'12-Traded for a '03 zx6r 636
1969 Datsun 1600 Roadster Build
viewtopic.php?t=52915
www.intercarofknoxville.com