My 95 Beater

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

My 95 Beater

Post by LeandroS14 »

I bought this car bone stock. Its a 95 240sx Se
this is after I put coils on it
Image

Now I rebuilt my Ka
Cp pistons 9:1 .20 over
Clevite bearings
ARP main and rod bolts
Cometic HG
Reconditioned Head
Reconditioned Rods
Bore, honed, decked, and line honed the block
Balanced the crank
Also resurfaced my flywheel and got a spec stage 3 clutch
Isis FPR, Walbro fuel pump and some other **** I cant remember right now
Also did a full gasket kit on the engine. Got new gaskets everywhere
Before and After

Image

Image

And soon to be boosted

Image

Now the car looks like this

Image




Didnt do a build thread because I didnt think half the people on here gave 2 ****, but im bored now so I decided to do this..
blacks13coupe
Dont Question My Nissan Knowledge
Posts: 561
Joined: Fri Oct 10, 2008 10:06 am
Location: Fort Worth TX

Post by blacks13coupe »

Nice. What kind of turbo is that? What kind of numbers you looking for?
Image
User avatar
iamtheyi
Dreams of owning a 240!
Posts: 98
Joined: Fri Apr 23, 2010 11:36 am
Location: Fullerton, CA

Post by iamtheyi »

woohoo! I agree with your decisin to do a thread. I give a **** :]. helps me with my future build :D +1
SpurlingBuilt
Driving Mom's Station Wagon
Posts: 39
Joined: Tue Mar 02, 2010 1:22 pm

Post by SpurlingBuilt »

keep the thread goin bro, i give a @##%!! looks like your goin to have a really nice ka-t build for yourself.
Its SpurlingBuilt!!!!
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

blacks13coupe wrote:Nice. What kind of turbo is that? What kind of numbers you looking for?
Its a Garrett T3 .60 trim, I think they call it the super 60. Considering its my daily/drifter car Im looking to go about 350 to the wheels
iamtheyi wrote:woohoo! I agree with your decisin to do a thread. I give a **** :]. helps me with my future build :D +1
Thanks bro, Pm me anytime you need a question answered. If I dont know they answer myself Im pretty sure I know someone who does
SpurlingBuilt wrote:keep the thread goin bro, i give a @##%!! looks like your goin to have a really nice ka-t build for yourself.
Thanks man. I started off mostly on this website SFLdrifters.com, 95% of the guys on there are assholes therefore I wasnt really motivated to make a build thread. Now im kinda wishing I would have on here. Ka-t.org FTW
User avatar
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100
Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:

Post by tom550 »

dang im loving that brown on there.
Image
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

tom550 wrote:dang im loving that brown on there.
uhhh I hate it! The guy who I got the Kouki front end had his whole car painted that color.
It was so badly painted the paint just chips off to the touch
User avatar
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100
Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:

Post by tom550 »

yea idk i just do.
Image
Truck
Knows Some Stuff About 240's!
Posts: 249
Joined: Tue Apr 22, 2008 9:48 am
Location: Austin, Texas

Post by Truck »

LeandroS14 wrote:
blacks13coupe wrote:Nice. What kind of turbo is that? What kind of numbers you looking for?
Its a Garrett T3 .60 trim, I think they call it the super 60. Considering its my daily/drifter car Im looking to go about 350 to the wheels
If I'm not mistaken, a t3 super 60 supports up to 350 HP, not WHP. So you will most likely have to do other mods to make over 300whp. But the turbo should spool and respond excellently.
Squeaks and squeals is the name of my wheels.
SoulGuardian
240sx Wannabe
Posts: 117
Joined: Tue May 23, 2006 1:10 pm
Location: Quebec city
Contact:

Post by SoulGuardian »

hehe look like the white pearl color match is a pain in the ass you are still afraid of ;)

was the kouki conversion much costly to do ?
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

I cant decide if I want to paint it matte black or top half gloss black with silver flakes and the bottom half deep pearl white with silver flakes
User avatar
groundperformance
Driving Mom's Station Wagon
Posts: 36
Joined: Fri Jun 11, 2010 9:01 pm

Post by groundperformance »

Setup looks minty fresh. GL with the project!
User avatar
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100
Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:

Post by tom550 »

MATTE!!
Image
xpinoyxmk
Knows Some Stuff About 240's!
Posts: 217
Joined: Thu May 07, 2009 3:10 pm
Location: Charleston AFB, SC

Post by xpinoyxmk »

I thought i seen this car before and then i saw that your in FL. Yea half the people on sfldriters are either fanboi's or hard parkers that think the sr engine is a god. The people on there who actually drive usually dont comment that much. Looking forward to seeing updates on this car.

Btw, you drift?
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

xpinoyxmk wrote:I thought i seen this car before and then i saw that your in FL. Yea half the people on sfldriters are either fanboi's or hard parkers that think the sr engine is a god. The people on there who actually drive usually dont comment that much. Looking forward to seeing updates on this car.

Btw, you drift?
Yea i drift..havent drifted this car yet but soon I will be able to
User avatar
redline240sx
Knows Some Stuff About 240's!
Posts: 346
Joined: Fri May 09, 2008 10:14 am
Location: Queens, NYC

Post by redline240sx »

build looks good, good luck man!!
S13 KA-t
SpurlingBuilt
Driving Mom's Station Wagon
Posts: 39
Joined: Tue Mar 02, 2010 1:22 pm

Post by SpurlingBuilt »

SpurlingBuilt wrote:keep the thread goin bro, i give a @##%!! looks like your goin to have a really nice ka-t build for yourself.
Thanks man. I started off mostly on this website SFLdrifters.com, 95% of the guys on there are assholes therefore I wasnt really motivated to make a build thread. Now im kinda wishing I would have on here. Ka-t.org FTW[/quote]
your welcome bro, an in the future, who cares what everybody else thinks. all that matters is what makes you happy.
Its SpurlingBuilt!!!!
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

thanks bro
SpurlingBuilt
Driving Mom's Station Wagon
Posts: 39
Joined: Tue Mar 02, 2010 1:22 pm

Post by SpurlingBuilt »

no problem buddy, thats what good 240 friends are about. :D
Its SpurlingBuilt!!!!
TumTum
Dreams of owning a 240!
Posts: 74
Joined: Tue Jun 01, 2010 8:11 am
Location: NYC

Post by TumTum »

nice ride...
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

thanks guys heres an interior pic

Image
madd ocx
Knows Some Stuff About 240's!
Posts: 369
Joined: Mon Mar 06, 2006 6:23 pm
Location: brooklyn

Post by madd ocx »

you should of stayed zenki, lol...
ka-t greddy 20g, enthalpy ecu, 440 injectors, ngk plugs and wires, bc v2 cams, megan catback, custom downpipe, godspeed fmic, safc 2, koyo rad, nismo thermostat, aem wideband, autometer phantom boost gauge, fidanza flywheel, spec stage 3+ clutch,j30 diff,n60 maf running 8psi!!
User avatar
TanManS14
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2764
Joined: Wed Apr 26, 2006 7:28 pm
Location: Raleigh, NC

Post by TanManS14 »

madd ocx wrote:you should of stayed zenki, lol...
It's always broken.
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

I like zenki for stylish dailys and stuff, but the kouki is just so much more aggressive! I think its more suitable for drifting
User avatar
iamtheyi
Dreams of owning a 240!
Posts: 98
Joined: Fri Apr 23, 2010 11:36 am
Location: Fullerton, CA

Post by iamtheyi »

^ lol I agree.
koukidriver
Dont Question My Nissan Knowledge
Posts: 829
Joined: Fri Nov 20, 2009 3:12 pm
Location: Jersey

Post by koukidriver »

I been looking for Kouki front end parts around in Jersey and I can't find Sh**,lol been looking for a while.
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

i got lucky...some dude drove from ocala to me and I traded him my zenki for a clean ass kouki plus 400 on my end. He gave me a carbon fiber hood and a body kit front bumper. I traded the hood for an oem one plus 80 bucks on the other persons end, and I sold the fiberglass bumper for $100 and bought the JDM one.
koukidriver
Dont Question My Nissan Knowledge
Posts: 829
Joined: Fri Nov 20, 2009 3:12 pm
Location: Jersey

Post by koukidriver »

Nice !!! Bartering Skills
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

lol thanks
User avatar
LeandroS14
240sx Wannabe
Posts: 153
Joined: Sun Dec 20, 2009 10:38 pm
Location: Davie, FL

Post by LeandroS14 »

Well yesterday I finally found out that my cometic HG is blown, Tomorrow I will be taking everything out to see whats going on, possibly installing a new gasket.
Post Reply