Import DPS KA24 SLEEVED Blocks Now Available!!

Dream about your 240's turbo power in this forum.
klattr1
Forum Moderator
Posts: 3724
Joined: Mon Feb 02, 2004 10:22 pm
Location: Charlotte, NC
Contact:

Post by klattr1 »

BRAD D wrote:im not too sure.. it was long ago. built by Ivan at AMS. i can mesure..
that's right...ah ok...probably Arias .020" if you got it from AMS
User avatar
TinyT
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3336
Joined: Thu Oct 12, 2006 5:55 am
Location: wisco

Post by TinyT »

13waynegarcia wrote:give us some prices so i can start saving
if you have to save for this block your not in the position to afford the rest of the parts that make it worthwhile to run one of these :wink:
Image
importdps
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 219
Joined: Tue Aug 12, 2008 10:52 am
Location: Philadelphia
Contact:

Post by importdps »

We have been getting a ton of calls on these blocks. First let me start with saying we have been building these motors for over 15 years. Don't think that for 1 second because we use them you will make over 1000hp, there are so many other surrounding factors that come into play as well.


A Fully Assembled Race Block by our team with sleeves and Import DPS Signature parts will cost $7500. We have dual cam cores that we can use.
Import Drag Performance
2947-51 North Marshall Street
Philadelphia, PA 19133
866-703-8794
BRAD D
KA-T.org Featured Ride
KA-T.org Featured Ride
Posts: 2164
Joined: Sun Oct 17, 2004 9:02 am
Location: winnipeg

Post by BRAD D »

i have some pretty good parts from my 600whp build.. the block was just not up to the task.

do you guys just sell the block?
or a bottom end? i could send in my rods and crank you could supply new psitons..

im not looking for 1000whp... just some thing that will be happy at 750-800
driftfiend
Dreams of owning a 240!
Posts: 51
Joined: Wed Apr 09, 2008 7:17 am
Location: jerzy

Post by driftfiend »

whats the benefits of plugging up the coolant passages??what are the sleeved blocks bored out 2??
User avatar
Jmcc
Encyclopedia-Nissan
Posts: 1436
Joined: Wed Jul 14, 2010 5:42 pm
Location: FL

Post by Jmcc »

[quote="driftfiend"]whats the benefits of plugging up the coolant passages??quote]

its a filled block. it just doesn't block the coolant passages.

a lot of drag racers do that. one for such a short time the motor is running you don't need coolant running through the block. two it makes it less prone to cracking and breaking under high hp and high boost. for a street car i would never do it.

but you can get away with a half fill on a street car. it helps
240SX-Pat
Driving Mom's Station Wagon
Posts: 42
Joined: Fri Jun 25, 2010 4:35 pm

Post by 240SX-Pat »

Please forget my stupidity but what is the different between this sleeved block and OEM
User avatar
Jmcc
Encyclopedia-Nissan
Posts: 1436
Joined: Wed Jul 14, 2010 5:42 pm
Location: FL

Post by Jmcc »

um i smell a google search coming on!!!!
240SX-Pat
Driving Mom's Station Wagon
Posts: 42
Joined: Fri Jun 25, 2010 4:35 pm

Post by 240SX-Pat »

Jmcc wrote:um i smell a google search coming on!!!!

Just did, that **** is amazing.
ray23
NooB
Posts: 1
Joined: Wed Oct 05, 2022 4:29 pm

Re: Import DPS KA24 SLEEVED Blocks Now Available!!

Post by ray23 »

is this still available
Post Reply