01 911 turbo, s14 12psi

Street races, kills, losses, etc
Post Reply
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

01 911 turbo, s14 12psi

Post by sdaigle240 »

went out with my friend for some twisties. i hounded him for some hwy pulls as i was dieing to know how much boost i needed to play with the big boys (01 Z06 exh cams tune with us aswell) i requested a 55 pull. i could feel my stock cams hurting me and short shifting would probably have been better. we did 2 pulls and each time id loose 1/2 car from about 6k to 7200, and as soon as i hit 4th i got the length back. we kept running out of hwy but it seems 4th was the place to play. maybe next time. and the vette is proven faster so he was just watching, he didnt line up with us.


gt32 spikes low 14 holds high 12s
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
User avatar
turbonola
Encyclopedia-Nissan
Posts: 1234
Joined: Sat Oct 22, 2005 6:07 pm
Location: Metairie, La.
Contact:

Post by turbonola »

nice run man, being able to run with high dollar cars is fun huh.
Image
11.65@118 1.64 60ft
User avatar
redpotatoes
Dont Question My Nissan Knowledge
Posts: 823
Joined: Thu Jun 09, 2005 6:19 am
Location: Qc

Post by redpotatoes »

Nice !
KA24DET GT2871R .86 Setup:
viewtopic.php?t=44222
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

Ha I thought I was gonna get flamed... It feels great! New clutch and I'm goin back on 15. I'm sure from a dig 1/4mi he woulda walked me. They run 12.6 stock and the aftermarket exh (forgot bout that) and ram air spoiler are supposed to make a decent difference. At the right place in my power/gear range it's a great matchup though.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
z240xs
Dont Question My Nissan Knowledge
Posts: 638
Joined: Sun Jun 13, 2010 3:57 pm
Location: Missouri

Post by z240xs »

very nice kill man
boosting it! solving it!
User avatar
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100
Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:

Post by tom550 »

you cant be flamed with that many posts
Image
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

thanks man,

I suppose, i can only hope people view them as posts with value, b/c 3k post of blah blah blah is worthless. :lol:
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
Jay240
240sx Wannabe
Posts: 101
Joined: Mon Dec 22, 2008 11:30 pm
Location: South Florida
Contact:

Post by Jay240 »

Nice !!
TryingToTurbo
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2369
Joined: Sun Aug 12, 2007 8:24 pm
Location: Raleigh, NC

Post by TryingToTurbo »

tom550 wrote:you cant be flamed with that many posts
You have clearly proven otherwise.

I don't care if you have 100,000 posts, you are still a ricer in my books.




sdaigle: It's always nice to see someone hangin' with the big boys. I have met a few of the local porsche owner's in my area, and let's just say the cool ones that don't look down on cars like ours are few and far between.
Built KA24DE: Wiseco 9.0:1 | Eagle H Beams | ARP Head & Main Studs | BC 272s & Springs | Supertech Valves
Boost Source: Under Construction

Image

Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
User avatar
biggie
Dont Question My Nissan Knowledge
Posts: 503
Joined: Fri Oct 14, 2005 11:51 am
Location: Winston Salem, NC
Contact:

Post by biggie »

Now if that^ ricer would have just noticed how old the thread is. :)
'93 Coupe GT32e/'93 Vert/'03 G35C

Always Broke!!!
TryingToTurbo
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2369
Joined: Sun Aug 12, 2007 8:24 pm
Location: Raleigh, NC

Post by TryingToTurbo »

biggie wrote:Now if that^ ricer would have just noticed how old the thread is. :)
It was bumped 4 days ago!!!
Built KA24DE: Wiseco 9.0:1 | Eagle H Beams | ARP Head & Main Studs | BC 272s & Springs | Supertech Valves
Boost Source: Under Construction

Image

Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
Post Reply