The KA GT3076R build in Cincinnati TO MANY PICS

This is for all those PICTURE THREADS ONLY. Motor installs, product writeups, showing off your car, put the thread in here.
User avatar
TanManS14
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2764
Joined: Wed Apr 26, 2006 7:28 pm
Location: Raleigh, NC

Post by TanManS14 »

Is the series 2 AEM able to run sequential (non wasted spark) ignition?
It's always broken.
User avatar
TinyT
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3336
Joined: Thu Oct 12, 2006 5:55 am
Location: wisco

Post by TinyT »

TanManS14 wrote:Is the series 2 AEM able to run sequential (non wasted spark) ignition?
why yes it is!
Image
smbonn2005
Knows Some Stuff About 240's!
Posts: 469
Joined: Wed Feb 03, 2010 6:06 pm
Location: Milford, MA

Post by smbonn2005 »

Hey if you do end up picking up the Full Race manifold hit me up when you go to sell your current one. If I havent found a new one by then I'll probably pick it up off of you.

And super jealous of the Z32 Trans adapter lol.

Looks badass man, keep up the good work and the updates!
Jus14
Knows Some Stuff About 240's!
Posts: 372
Joined: Mon Sep 21, 2009 2:25 am
Location: Cookeville,TN

Post by Jus14 »

Sick Build...
Zip Tie Racing
www.NissanNation.com
Image
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

after what was seen tonight that mani might go for sale soon... probably mid june with minor use due to the fact that with this turbo hood clearance is a issue

Image
smbonn2005
Knows Some Stuff About 240's!
Posts: 469
Joined: Wed Feb 03, 2010 6:06 pm
Location: Milford, MA

Post by smbonn2005 »

Could you measure from turbo flange to hood? Just to see if I would be able to run it. Thanks
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

K working on finishing things up for a little ive got some things I wana do this summer with my car so I am just trying to get like 12lbs out of it at least make like 350 which shouldnt be a problem...

so far I have gotten the rear 5 lug swap done with z32 brakes. started working on the little things that you tend to forget and double checking my work so far I dont want to find out the hard way.
also ordered my aeromotive stealth pump aem rail ID2000s lol and a aeromotive reg.. still waiting on injectors that have a custom piece to go into the stock manifold to replace the dumb chewed up rubber 1s I have..

Image

Image

yea it looks a little weird It was blasted for welding all the crap i dont need shut.. gonna repaint it with a aluminum paint until i get the manifold i want..

Image

Image

new battery tray cover.. it wasnt the best welding when i fixed it so I fell better with that there lol

Image
katrecipe
**BANNED**
Posts: 288
Joined: Sun Nov 23, 2008 6:50 pm
Location: B A N N E D

Post by katrecipe »

what did the aeromotive stealth pump and regulator cost you???
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
I was a moron and I got banned!
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

169 for the pump and 175 for the reg. But thats all the info i can give on that.
User avatar
Jordan Gladman
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3254
Joined: Tue Jul 20, 2004 11:14 pm
Location: Abbotsford, BC

Post by Jordan Gladman »

Wicked build and great attention to detail. The color you choose kind of saddened me but to each their own, i would have atleast painted the roof black. But either way kudo's on a job well done. I have to do all of this to my S14 this summer.
WWW.GLADFAB.COM SOHC Turbo Manifolds
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

The color makes me sad everytime i look at it dont worry. It had been spray painted 3 times before i got the car and this was my first paint job i didnt want a dark color. Because of the fear of what i would see. Im a very detailed person so i dont know why i bought the shell
User avatar
Jordan Gladman
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3254
Joined: Tue Jul 20, 2004 11:14 pm
Location: Abbotsford, BC

Post by Jordan Gladman »

I know what you mean about the color. I want to paint my car black so im going to have to be a different person for a few days while I try and get everything straight. That or I'll hire someone to do all the sanding. I always get bored and rush the finished product so I cut corners. It looks like you did a pretty good job, you might have been able to pull off a dark color.
WWW.GLADFAB.COM SOHC Turbo Manifolds
187MotorSports
240sx Wannabe
Posts: 139
Joined: Tue Jul 06, 2010 6:00 pm

Post by 187MotorSports »

Jordan Gladman wrote:I know what you mean about the color. I want to paint my car black so im going to have to be a different person for a few days while I try and get everything straight. That or I'll hire someone to do all the sanding. I always get bored and rush the finished product so I cut corners. It looks like you did a pretty good job, you might have been able to pull off a dark color.
Yeah i rather tear a car down then do body work. :lol: either way the car looks very nice.
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

Yea its a awsome 5footer lol. I had a bad run on the drivers side door tried to wet sand it out its not perfect but ill live with it for now maby paint it again when i finally decide to get some wider front fenders and mold them shut. [/list]
NateDogg
Dont Question My Nissan Knowledge
Posts: 993
Joined: Fri Feb 11, 2005 4:31 pm
Location: BC CANADA

Post by NateDogg »

I personally like the paint and think it looks like aluminum. Unique finish to it.

Get some nice wheels and tint it would look pretty sick IMO.
'91 S13
Built, balanced KA-T
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

I meen dont get me wrong i do like it but i would love a black red or blue more. But it will work for now maby ill get a 14kouki shell were i can swap all my stuff over.
punjabi
Learners Permit
Posts: 19
Joined: Tue Mar 29, 2011 3:46 pm

Post by punjabi »

very nice build...i want to c how much lag the gt30 has..im thinking about using gt30 for my setup aswell.
Thinking about going KA-T!
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

I couldnt tell you I sold it and bought a bigger precision billet 6262...
punjabi
Learners Permit
Posts: 19
Joined: Tue Mar 29, 2011 3:46 pm

Post by punjabi »

oh ok..great build tho! im in ohio aswell..cleveland area!
Thinking about going KA-T!
mmmS13
Knows Some Stuff About 240's!
Posts: 304
Joined: Fri Dec 31, 2010 11:50 pm
Location: SoCal

Post by mmmS13 »

Im excited for the 6262 to be in action, it will be my turbo of choice as well
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

pick your manifold wisely.. I wish someone near me had a full race that i could just test fit under the hood to see. im just gonna make have a custom mani made for my car..
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

Well guys its been a while since my last update Ive been super busy and just havent done much with the car I have ordered some parts and what not but still no driving yet. but close. show some of the updates

Did the ps canister relocation its a chase bays kit and I am going to weld a an fitting to the pump with a elbow because yous can see they dont do good on there end.

Also got some BC Racing coilovers
5 Lug hubs
stainless brake lines all around
350Z Brembo front brake kit
sold the old peak boost manifold for a Full-race mani to be a BOSS haha
WANTS TO SELL THE 6262 SO LET ME KNOW 1350 SHIPPED OBO
also got some Varrstoen 17x9,5 wheels
Falken rt615k tires gonna run 235/40s in the front and 255 in the rear
Circuit sports overflow

I am sure im missing stuff i feel there isnt much left thats not touched on this car

Image

Image

Image

Image

Image

Image



Im sure there is plenty of things im missing on here but im sure ill update soon with some more in "action" like running or driving




FOR SALE PRECISION BILLET 6262 1350 OBO LMK
jholman05
Dont Question My Nissan Knowledge
Posts: 530
Joined: Wed Nov 07, 2007 2:32 pm
Location: Cincinnati

Post by jholman05 »

Needs more progress :D

Can I be expecting to drive this thing next spring?
Image
2012 - S14 KA, Nismotronic, GTi-R T28 12psi, Meth, PSM HMIC, DW550cc, N62, S15 HLSD, Spec 3, Fidanza = 12.4 @ 110
2013 - 9.0 Wiseco/Manley, Nismotronic, GT2876R 23psi, Meth, PSM HMIC, 850cc, N62, S15 HLSD, Z32 Spec 3, D21 Fidanza = ??.? @ ??? 440whp/380wtq
YouTube Channel -> http://goo.gl/MZ5EE
User avatar
sloka-t
Dont Question My Nissan Knowledge
Posts: 641
Joined: Thu Nov 23, 2006 9:19 am
Location: tallahassee, FL

Post by sloka-t »

super jelly
Mechanical Engineering, Florida State University
NateDogg
Dont Question My Nissan Knowledge
Posts: 993
Joined: Fri Feb 11, 2005 4:31 pm
Location: BC CANADA

Post by NateDogg »

CINCYS13 wrote:Well guys its been a while since my last update ...

Image



Im sure there is plenty of things im missing on here but im sure ill update soon with some more in "action" like running or driving




FOR SALE PRECISION BILLET 6262 1350 OBO LMK
Looks like the wreckage after a christmas morning with small children.
'91 S13
Built, balanced KA-T
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

jholman05 wrote:Needs more progress :D

Can I be expecting to drive this thing next spring?
I dont know if you will be able to keep a grip on the wheel and with all that tq it might twist the chassis off the line
User avatar
emo_tactical9
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3086
Joined: Tue Sep 18, 2007 3:21 am
Location: Bowling Green, KY

Post by emo_tactical9 »

Damn, o didn't know they made FT615 still.
Just call me Adam.
95 240: DIYPNP and T28.
08 Honda Fit
84 200sx: Sold after almost 10 years.
My file hosting:Calum,MegaSquirt,FSM
CINCYS13
Dreams of owning a 240!
Posts: 71
Joined: Fri Jul 24, 2009 5:05 pm
Location: Cincinnati OH
Contact:

Post by CINCYS13 »

emo_tactical9 wrote:Damn, o didn't know they made FT615 still.
they do but they dont.. It was revised with a better conpound and now 615K
Post Reply