Custom License Plates?
Custom License Plates?
Anybody have one? (You know, the custom letters instead of something like FGW-819)
I'm thinking about NOTANSR (not an sr) or LOLUMAD (you'll just need to know that one to get it)
Curious who all out there has one. And don't tell me, "That will make you an easy target to get pulled over because cops will remember you!" That's true, but I don't street race nor sell drugs/have a record.
I'm thinking about NOTANSR (not an sr) or LOLUMAD (you'll just need to know that one to get it)
Curious who all out there has one. And don't tell me, "That will make you an easy target to get pulled over because cops will remember you!" That's true, but I don't street race nor sell drugs/have a record.
- eazye2000
- Encyclopedia-Nissan
- Posts: 1358
- Joined: Tue Jan 16, 2007 4:32 am
- Location: Inverness, FL
- Contact:
Lots of states have vanity plates. And some of them have filters that wont let you say obscene or profane things. I don't know the particular laws in the carolina's if that is accurate in your profile.
I know we have it here in Florida. A guy up in CT got tired of dealing with emissions and inspections so he came down here and registered the car. Got a plate that says OBD2LOL here in FL lol
I know we have it here in Florida. A guy up in CT got tired of dealing with emissions and inspections so he came down here and registered the car. Got a plate that says OBD2LOL here in FL lol
- superDorifto
- Dont Question My Nissan Knowledge
- Posts: 508
- Joined: Tue Oct 11, 2005 6:58 pm
i would love to get one but the wait and the money wasn't worth it to me
my buddy had one made that said dookie i don't know why. but it took them like a year to get it to him. and like 4 or so temp tags till he got it.
i wanted to get one that said srkiler. but one of my boys had those police academy plates. got him out a few tickets
my buddy had one made that said dookie i don't know why. but it took them like a year to get it to him. and like 4 or so temp tags till he got it.
i wanted to get one that said srkiler. but one of my boys had those police academy plates. got him out a few tickets
- Walperstyle
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2517
- Joined: Sat Jun 21, 2008 2:32 pm
- Location: Red Deer
- superDorifto
- Dont Question My Nissan Knowledge
- Posts: 508
- Joined: Tue Oct 11, 2005 6:58 pm
- proconcept23
- Knows Some Stuff About 240's!
- Posts: 302
- Joined: Sat Feb 28, 2009 12:31 pm
- Location: AZ
Re: Custom License Plates?
There are some place that don't allow custom license plates but I've seen lots of those and I think its very cool. I also want to try it out but don;t know how to get it done.airman wrote:Anybody have one? (You know, the custom letters instead of something like FGW-819)
I'm thinking about NOTANSR (not an sr) or LOLUMAD (you'll just need to know that one to get it)
Curious who all out there has one. And don't tell me, "That will make you an easy target to get pulled over because cops will remember you!" That's true, but I don't street race nor sell drugs/have a record.
-
- Knows Some Stuff About 240's!
- Posts: 469
- Joined: Wed Feb 03, 2010 6:06 pm
- Location: Milford, MA
- Rick
- KA-T.org Co-Owner
- Posts: 1135
- Joined: Sun Feb 01, 2004 7:14 pm
- Location: San Diego, CA
- Contact:
There used to be a dude around here in Portland with a MKIV Supra - his plate was GOT MILF since he was from WA he had 7 spots. He actually made the news...
http://www.youtube.com/watch?v=pvSZVFLnPN8
Now its PUNISHR.... I remember beating him though from a 3rd gear roll on in my S14 very terribly, even though I think he is in the 600whp range with that Sooopra.
--Rick
http://www.youtube.com/watch?v=pvSZVFLnPN8
Now its PUNISHR.... I remember beating him though from a 3rd gear roll on in my S14 very terribly, even though I think he is in the 600whp range with that Sooopra.
--Rick
••••••••••••••••••••••••
No... I don't own a 240 anymore!
••••••••••••••••••••••••
"Don't remind me of my failures, I haven't yet forgotten them"
No... I don't own a 240 anymore!
••••••••••••••••••••••••
"Don't remind me of my failures, I haven't yet forgotten them"
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2369
- Joined: Sun Aug 12, 2007 8:24 pm
- Location: Raleigh, NC
I used to have KA-T on my plate. But the vanity plates cost too much yearly.
Built KA24DE: Wiseco 9.0:1 | Eagle H Beams | ARP Head & Main Studs | BC 272s & Springs | Supertech Valves
Boost Source: Under Construction
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
Boost Source: Under Construction
Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
-
- Knows Some Stuff About 240's!
- Posts: 360
- Joined: Sun Oct 08, 2006 9:06 pm
- Location: Biloxi, MS
- Contact:
Just because you're allowed 6 spaces doesn't mean you have to use 6 spaces.s13grady wrote:Im not a vanity plate type guy but If nj had 4 characters id get: T1T5
being that we have 6, my only other option id like on my car would be: 0H-SLPR or PHIUK-U. Itd never happen though
assram is by far the best one on the thread so far.
You could just get it centered like... _T1T5_
Or _T1TZ_ and tell em it says twenty's if they sorta catch on to it.
- beercandrifter
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2271
- Joined: Fri Oct 27, 2006 7:57 am
- Location: Melbourne, FL
lol 20/yr here. trying to settle on what plate I want
kinda decided against
slow_ka
just draws attention
br0k3n was taken
fail was taken
boom_ka is available
FRDPROB is available lol
skyrine is available
stillka is available
kinda decided against
slow_ka
just draws attention
br0k3n was taken
fail was taken
boom_ka is available
FRDPROB is available lol
skyrine is available
stillka is available
91 240sx Hatch: HomeBrwd
25psi hx35/8.8:1/264^2 cams/95lb injectors/Megasquirt 2/ka24de build **RIP**
T56/4.8 LSx/LS9 Cam/60lb injectors/comp 918 springs/Megasquirt 3/all custom wiring
25psi hx35/8.8:1/264^2 cams/95lb injectors/Megasquirt 2/ka24de build **RIP**
T56/4.8 LSx/LS9 Cam/60lb injectors/comp 918 springs/Megasquirt 3/all custom wiring
-
- Knows Some Stuff About 240's!
- Posts: 465
- Joined: Sat Jul 07, 2007 11:35 am
- Location: North Jersey
- superDorifto
- Dont Question My Nissan Knowledge
- Posts: 508
- Joined: Tue Oct 11, 2005 6:58 pm
HAHAHA...i like SKYRINE. STILLKA is good too. I wonder if LOLUMAD is available...ROFL
Stared at 37OH55V for a little bit...no luck here either.
Stared at 37OH55V for a little bit...no luck here either.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
-
- Knows Some Stuff About 240's!
- Posts: 465
- Joined: Sat Jul 07, 2007 11:35 am
- Location: North Jersey
- beercandrifter
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2271
- Joined: Fri Oct 27, 2006 7:57 am
- Location: Melbourne, FL
-
- Knows Some Stuff About 240's!
- Posts: 465
- Joined: Sat Jul 07, 2007 11:35 am
- Location: North Jersey
- proconcept23
- Knows Some Stuff About 240's!
- Posts: 302
- Joined: Sat Feb 28, 2009 12:31 pm
- Location: AZ