HY35 18psi takes 2012-2013 GTR

Street races, kills, losses, etc
Post Reply
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

HY35 18psi takes 2012-2013 GTR

Post by sdaigle240 »

Hy35 18ish psi vs 2012-2013 GTR had and exhaust, no clue what else. He did say he was not in R mode but he saying it in a curious manor if it's really any faster. I ate sushi with the dude but we didn't say much besides that was fun haha. I asked him what mph we were going and he asked my hp, I told him 360 was my guess. I had no idea these cars trap 124-125mph or I would have been asking him more questions because my other kills are 114mph ish cars.

I started off around 4,500 in 3rd and got a tiny jump, but got probably a car by 4th. Now, he did switch lanes and pull behind me, but was certainly not reeling me in unless he was just keeping pace? I dunno at no point was he in front and he made no excuses when we talked. all of 5th was clean and I was in front by solid car if not two, I let off at 7,000 lol.

It really doesn't make much sense but there's my story.

Later I ran my friends 22psi 3582r rb25 and he ran on me pretty good in just 3rd. There's a video of our other buddys t67 2jz 18psi putting busses on the GTR. EDIT: I'll get my hands on the video soon.X

Ahhh Mexico was cool.

hers a pic of his car
Image
Last edited by sdaigle240 on Tue Aug 21, 2012 10:21 am, edited 3 times in total.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
User avatar
schmauster920
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2612
Joined: Tue Feb 20, 2007 5:25 pm
Location: CA

Post by schmauster920 »

Video isnt working


Nice kill for sure!! Nissan genocide!
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
User avatar
supakat
SuperMod
Posts: 8018
Joined: Sun Oct 08, 2006 12:13 pm
Location: FL

Post by supakat »

Wish I could find some people to race then go eat sushi!
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Image
Build thread/Blog
YouTube Channel
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

yep! we were like 20 cars deep for a meet that had about 50+ cars. our 240 sceen is nuts.
Last edited by sdaigle240 on Mon Aug 20, 2012 7:38 am, edited 1 time in total.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
User avatar
beercandrifter
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2271
Joined: Fri Oct 27, 2006 7:57 am
Location: Melbourne, FL

Post by beercandrifter »

supakat wrote:Wish I could find some people to race then go eat sushi!
wish i could afford all these trips to mexico lol


nice results though =)
91 240sx Hatch: HomeBrwd
25psi hx35/8.8:1/264^2 cams/95lb injectors/Megasquirt 2/ka24de build **RIP**
T56/4.8 LSx/LS9 Cam/60lb injectors/comp 918 springs/Megasquirt 3/all custom wiring
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

ive got my reservations about this kill. 11.00 @ 124-125..... i dont think my cars that fast but i do think this race was legit, most def 3rd and 5th when we were in seperate lanes was. all the other cars ive beat are mid 12s @ 114-115.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
User avatar
schmauster920
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2612
Joined: Tue Feb 20, 2007 5:25 pm
Location: CA

Post by schmauster920 »

I could see you pulling on him... Awd + launch control... not much can keep up with that in a 60 foot.

The mph at the end of the strip says a lot though, figure he only has 10mph at the end of the track than the other cars.
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

yup! they cut like 1.5s lol. id def get murdered starting in 1st or 2nd but i guess theres a lot more to it then a time slip... speed, aerodynamics, rpm you start, gear ratios etc. unfortunately people never post their 1/8th mi speeds and times, thats the real pudding, then you can see how quickly the car accelerates from a realistic street racing speed.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
User avatar
PairOfS14s
240sx Wannabe
Posts: 127
Joined: Thu Jun 14, 2012 6:37 pm
Location: Cartersville, GA

Post by PairOfS14s »

Nice kill man! Did he atleast buy your sushi? lol
Stock internals
Stock MAF
Stock FPR
370cc injectors
Walbro 255
EGAY FMIC
GT2871 @ 11psi
JWT ecu
Custom 2.5" turbo back exhaust
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Post by sdaigle240 »

hahah thanks, nah there were 10 of us (mostly 240s) and we ate a zillion dollars worth of fish lol

we had just finished up a 30 minute go kart enduro with 15 drivers.

i guess far cooler then the GTR race, i beat the owner of 240sxmotoring and one other "pro" driver and placed first :)

funny how i kill it on grip but only care about drift lol
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
Post Reply