Went out to the meet last night. Met some cats I know with a KA. We played a little and he said my ish is quick. I am only running 10psi so I was kid of shocked to hear that. We ended up going to a location to see a race but they finished. I ended up doing some tuning and getting a log.
We then went back to the spot and I met some other cats I know. One of their friends had a scion xb boosted. It was a nice setup. We ended up following some whips to see a race. This Mazda Speed ran two z32's. I was following a 370z with bolt ons. So they pull to the side and I passed them to go home. Well the 370z started to get next to me. I rode in 2nd and he punched it. I then punched and was in front by half a car. Then by end of 3rd it was 1.5 cars. I ran for until 120 and backed off. Perfect way to end a night if you ask me.
Next 370z down
Next 370z down
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
Yea 10psi. My injectors are coming in on Tuesday and my DIY Boost control solenoid on Monday. Next couple weeks should be interesting to say the least.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
-
- Knows Some Stuff About 240's!
- Posts: 303
- Joined: Wed Oct 19, 2011 12:08 am
- Location: Owasso, ok
Damn you should have taken them all down. Lol that would have been one hell of a night. But sounds kinda like over here, alot of cars meet up,make some match ups, then go run them on the highway or we have a place called Mexico where we do our dig races.
Always make sure the juice is worth the squeeze!!
91 240sx turbo-first rwd and loving it
91 240sx turbo-first rwd and loving it
You sir need to buy a gopro.
230k stock block
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
50 trim 16psi
810cc DW's
Z32 MAF
Enthalpy Tuned
*Sold*
Evo X Cornfed
http://www.youtube.com/LGmmkay
^ Youtube Channel ^
viewtopic.php?p=496648#496648
^ Build Thread ^
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
^ Considering E-Mance? Read this ^
I do need a go pro but injectors/manifold/ and whatever else takes precedence.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel