11.3 second pass VIDEO!

All about KA-T Drag Racing. Bragging, Timeslips, Results, Questions, Whatever
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

11.3 second pass VIDEO!

Post by RosadoRacing »

http://www.youtube.com/watch?v=lw-ygpdIT38

14psi 480whp shifting at 6500rpm
Badazzsr20
240sx Wannabe
Posts: 140
Joined: Wed Sep 09, 2009 8:35 pm

Post by Badazzsr20 »

very nice man!! that thing came out the hole like a bullet! nice stuff
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Thanks yeah it spins allot I might have to lower the rpm but I like fighting wit the car a bit its fun im going Tom hopefully it runs better!
Berserker
Dont Question My Nissan Knowledge
Posts: 823
Joined: Tue Sep 19, 2006 4:15 pm
Location: IL

Post by Berserker »

Haha great launch. I don't think my white bunny clutch would really enjoy a launch like that lol
608 whp @ 27.25 psi powered by Precision6262
Image
User avatar
airman
KA-T.org OWNER
Posts: 2144
Joined: Tue Jun 16, 2009 12:51 pm
Location: Anderson, SC

Post by airman »

Wow that looks fantastic. That's what I want to accomplish with my 2014 build. I need to read through build thread.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Thanks for the comment airman
jholman05
Dont Question My Nissan Knowledge
Posts: 530
Joined: Wed Nov 07, 2007 2:32 pm
Location: Cincinnati

Post by jholman05 »

It looks so docile until it launches... then the true beast comes out!

Looking good
Image
2012 - S14 KA, Nismotronic, GTi-R T28 12psi, Meth, PSM HMIC, DW550cc, N62, S15 HLSD, Spec 3, Fidanza = 12.4 @ 110
2013 - 9.0 Wiseco/Manley, Nismotronic, GT2876R 23psi, Meth, PSM HMIC, 850cc, N62, S15 HLSD, Z32 Spec 3, D21 Fidanza = ??.? @ ??? 440whp/380wtq
YouTube Channel -> http://goo.gl/MZ5EE
southjrz240
KA-T.org Featured Ride
KA-T.org Featured Ride
Posts: 664
Joined: Thu Apr 07, 2005 11:29 am
Location: Forked River New Jersey

Post by southjrz240 »

great work
http://www.ka-t.org/cain.htm
91 Hatch KA-T with the help of TURBO240
Image
BoBaCk1
240sx Wannabe
Posts: 156
Joined: Wed May 27, 2009 7:56 pm
Location: houston tx,guam

Post by BoBaCk1 »

Sick launch what was the trap speed and 60 foot .
Built ka-t
Arias 8:8:1 .20 over
K1 rods
Arp head,main,rod studs
Kelford 272's,dual valve springs
Precision 6262sp .82a/r, peakboost manifold
Cxracing fmic
Fuel injector development 2000cc
Proefi pro128, e85 flex fuel
Rb25 flywheel, dxd 350z clutch
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

1.47 127mph
User avatar
flip240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1942
Joined: Thu Aug 19, 2004 1:09 am
Location: Chicago, IL

Post by flip240 »

that was an insane launch!! what was the other guy's times?
- Phil - Concord Gray S14 - 339 rwhp, 340 ft-tq @ 12psi
Daily driven turbocharged KA24 for 10 years and counting. 2004-2014
My setup: KA24DE-T
User avatar
i_slide
240sx Wannabe
Posts: 189
Joined: Sun Apr 17, 2011 7:45 am
Location: Pennsylvania

Post by i_slide »

Like what everyone else said - Nice Launch!!! What suspension are you running in the rear? Stock?
Project - Aries 8.8.1, Crower pro series rods, Kelford 272, 11mm head studs, Five0 2150cc, Magnafuel-4303, PTE6466

Daily - 95 stock block, ARP's, bigger ring gaps etc, 57Trim/63A/R, 550cc, z32 Maf, 93 octane /110 octane maps.

Follow me on Instagram @Prep_40oz
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Kyb agx shocks on softest setting with lowering springs besides that everything else in the rear is stock except LSD of course. The other guy ran 10.58 138mph his 60ft was I believe 1.8 I spoke to him after the run hes on 38psi 740whp. I know I can run 10.5 with 550whp 22lbs
ALTKAT96
Knows Some Stuff About 240's!
Posts: 206
Joined: Sat Oct 28, 2006 6:01 am

Post by ALTKAT96 »

What is the A/R on the exhaust housing now?
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

t4 .68
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

That's so awesome! That launch was sick!
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

Post by jaysol92 »

i was in the bleachers when you were running the car. i gotta say the car sounds incredible in person
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Thanks. I'm going to summer nationals at etown June 30. This time on 25lbs 650whp should run low tens
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

Post by jaysol92 »

Nice! Hopefully with all that added power your car will snap from the start like before. it was such a tastey launch lol
neverlift
Knows Some Stuff About 240's!
Posts: 263
Joined: Mon Apr 03, 2006 11:35 am
Location: fla

Post by neverlift »

what rpm is your launch control set to? that was a very hard launch! :D
Image
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

Post by jaysol92 »

I'm actually curious about the launch control too :)
Last edited by jaysol92 on Wed Jun 12, 2013 7:18 pm, edited 1 time in total.
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

I run the slicks at 11lbs mght go 13 since I snapped a axle but the car consistently does 1.4 the anti lag is 6200 -9 degrees timing 15% fuel. I'll keep ya posted hopefully heading back out in a few Weeks 9s would be nice lol
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Forgot to mention I went back to the Dyno and it was six degrees to retarded so the car will def pick up alot I felt alot of lag in second n third gear which is why the mph doesn't match the et
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

Post by jaysol92 »

Good now it should pull more aggressively . low 10s , maybe even break 9s lol
neverlift
Knows Some Stuff About 240's!
Posts: 263
Joined: Mon Apr 03, 2006 11:35 am
Location: fla

Post by neverlift »

yeah 6 degrees is a bunch of timing, might not crack 9's but I think you will be close.

6* global or just at boost?
Image
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

6* overall my timing light was screwed up idk what s13s run with 650whp but pulling 1.4s should get me a 9 sec slip
neverlift
Knows Some Stuff About 240's!
Posts: 263
Joined: Mon Apr 03, 2006 11:35 am
Location: fla

Post by neverlift »

global yeah you might just pull that nine, hit the track man!!!! :D
Image
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

July 19 I'll be at Atco raceway for pan America I think they canceled summer Slam at e town drag racing isn't what it once was. before the years over im a change the wg spring and run 30+psi
adamky
SuperMod
Posts: 3511
Joined: Wed May 31, 2006 6:40 am
Location: Louisville, KY

Post by adamky »

Very nice launch. That thing hooks.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
Image
RosadoRacing
Dont Question My Nissan Knowledge
Posts: 541
Joined: Tue Apr 06, 2010 5:33 pm
Location: Bethlehem, PA

Post by RosadoRacing »

Thanks adamky and to answer your YouTube question the tires are Mt et slicks 26x8.5
Post Reply