625@26psi FWD KA-T
625@26psi FWD KA-T
I finally got my KA-T back up and running after almost 4 years, did some dyno tunning last Thurdays and made 625@ 26psi with a conservative tune on E85. My goal of 700hp was cut short by my PTE 6765 billet which started making noise after a few dyno runs so I decided to leave it at that(turbo ended up crapping out last Sunday @ ATco raceway). I will slap on an old 70MM cast wheel turbo I have laying around so I can keep dailing the car in at the track.
Re: 625@26psi FWD KA-T
Nice work. Keep it up.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- s14fiend
- Knows Some Stuff About 240's!
- Posts: 344
- Joined: Wed Feb 09, 2005 7:53 pm
- Location: Miami, FL
Re: 625@26psi FWD KA-T
Nice work.... any videos ripping up on EVOs or other cars? What does the car weigh in at?
Re: 625@26psi FWD KA-T
Unfortunately don't have any recent videos of the car just old vids from 4 years ago with the old setup.s14fiend wrote:Nice work.... any videos ripping up on EVOs or other cars? What does the car weigh in at?
The car weighed in @2540lbs without me in it when it was a street car, now it should weigh 2400ish and I have more unnecessary stuff to take out of it.
The plans are to going with a bigger turbo and make 800hp+ but I would like to dial the car in with the power it has made so far before I try to make more power.
This thing spun 1st-4th gear on 26x10 slicks last Sunday at the track.
The boost did shoot up to 33 psi on the track for some reason.
- s14fiend
- Knows Some Stuff About 240's!
- Posts: 344
- Joined: Wed Feb 09, 2005 7:53 pm
- Location: Miami, FL
Re: 625@26psi FWD KA-T
ALTKAT96 wrote:Unfortunately don't have any recent videos of the car just old vids from 4 years ago with the old setup.s14fiend wrote:Nice work.... any videos ripping up on EVOs or other cars? What does the car weigh in at?
The car weighed in @2540lbs without me in it when it was a street car, now it should weigh 2400ish and I have more unnecessary stuff to take out of it.
The plans are to going with a bigger turbo and make 800hp+ but I would like to dial the car in with the power it has made so far before I try to make more power.
This thing spun 1st-4th gear on 26x10 slicks last Sunday at the track.
The boost did shoot up to 33 psi on the track for some reason.
Damn haha sounds like your going to need some lead to hold that bi*ch down.
-
- Dont Question My Nissan Knowledge
- Posts: 541
- Joined: Tue Apr 06, 2010 5:33 pm
- Location: Bethlehem, PA
Re: 625@26psi FWD KA-T
revving it to 8300 your brave! what's trans you using to hold those big tires?
Re: 625@26psi FWD KA-T
The rev limit is set @ 8500rpm, I also have an ATI 7" damper to help counter act crank vibrations. I'm running a stock style Altima trans with PAR 1-4 dog engagement gears, billet cuff and billet final drive. I also have Quaife diff and a comp twin disc.
-
- Dont Question My Nissan Knowledge
- Posts: 541
- Joined: Tue Apr 06, 2010 5:33 pm
- Location: Bethlehem, PA
Re: 625@26psi FWD KA-T
wow that's a nice set up. so you can shift without engaging the clutch?
-
- Driving Mom's Station Wagon
- Posts: 27
- Joined: Mon May 03, 2010 11:37 am
- Location: new york
Re: 625@26psi FWD KA-T
not ur typical altima. i would love to see this rip the track in person
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
Re: 625@26psi FWD KA-T
thats crazy. nice setup. is precision making good on their poor QC? they're a bunch of tards there if you call up and actually talk to their technical representatives.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
- Alonso
- Dont Question My Nissan Knowledge
- Posts: 759
- Joined: Tue Jun 16, 2009 3:16 pm
- Location: Wichita,KS
Re: 625@26psi FWD KA-T
One badass altima! Who said KAs can't rev lol
Are you running some type of ignition box with the denso coils or an oem ignitor?
Are you running some type of ignition box with the denso coils or an oem ignitor?
Billet PTE 6765 divided T4, Nismotronic, Speed density, Coil on plug conversion.
AWS D17.1 certified
Follow me on Instagram: @alonso240
AWS D17.1 certified
Follow me on Instagram: @alonso240
Re: 625@26psi FWD KA-T
Not sure yet I have to send the turbo back to see what they tell me, can't really complain about the turbo since I've put 3 years of 30psi+ of abuse on it and it has been on both my cars.sdaigle240 wrote:thats crazy. nice setup. is precision making good on their poor QC? they're a bunch of tards there if you call up and actually talk to their technical representatives.
Re: 625@26psi FWD KA-T
Thanks!!Alonso wrote:One badass altima! Who said KAs can't rev lol
Are you running some type of ignition box with the denso coils or an oem ignitor?
I'm running an M&W Pro-14 box with these CBR coils.
Re: 625@26psi FWD KA-T
Destroying a brand new COMP twin disc last Saturday, not entirely sure what happened to the clutch yet.
Still went 13.3..lol
http://www.youtube.com/watch?v=YUqVcn6vAsg
Still went 13.3..lol
http://www.youtube.com/watch?v=YUqVcn6vAsg
Re: 625@26psi FWD KA-T
Nice setup
Re: 625@26psi FWD KA-T
What cams are you running to make power to 8.5k rpm? Any headwork? Also Where did you get your ati damper. Does it allow u to run all your accessories?