After waiting for 4+yrs....
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
After waiting for 4+yrs....
After 4+yrs of sitting the Altima is back on the road. Installed the GT35r on her with the 850cc injectors.... and thanks to Sdaigle we put a rough tune in her and I drove it 900 miles from Pa to FL. I can't tell you how good it felt to drive her even though I probably should have test her out for a few days prior, but HEY you gotta live a little!
She sat under a tree... :-(
All washed up!!
in FLORIDA!!!
GT35R resting in it's new home
350Z Track Rotors conversion with 300ZX calipers
vs.... original size rotors
Lots of Tuning to be done but she hella fast compared to the old t3/t4......!
She sat under a tree... :-(
All washed up!!
in FLORIDA!!!
GT35R resting in it's new home
350Z Track Rotors conversion with 300ZX calipers
vs.... original size rotors
Lots of Tuning to be done but she hella fast compared to the old t3/t4......!
Last edited by Altima-DET on Sun Jan 26, 2014 12:16 pm, edited 1 time in total.
Re: After waiting for 4+yrs....
Looks badass! I'm guessing you're gonna run e-85 with those big injectors?
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Re: After waiting for 4+yrs....
Looking good!
I am definitely curious as to how much powa you are making.
I am definitely curious as to how much powa you are making.
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
You and me both! At 7psi with the current setup on it, it's faster (butt dyno) than it was with 15psi with the T3/T04E 50 tirm I had on there. Thanks to Jmac636 I was able to get Consult working now I can map trace and start turning up the boost. Planning on running around18-20PSI when complete, but it baby steps. It's a build motor with Wiesco pistons and the heads been ported and polished. It's gonna be fun that's all I can say
Re: After waiting for 4+yrs....
wewt another turbo ka in florida!!
What manifold if that?
wtf is up with birds rage dumping on nissans on a rest. I get it too but no tree
If he is anywhere in jacksonville e85 is pretty much out(I cant think of a single pump off the top of my head) I run 880's on 93octane. Theoretically 370's duty cycle out at ten psi on a t3 meaning he needs at least 740cc to run 20 psi on pump gas(turbo depending obviously), I dont see a problem having a little extra fuel.
Always been curious about a turbo altima nice work!
What manifold if that?
wtf is up with birds rage dumping on nissans on a rest. I get it too but no tree
If he is anywhere in jacksonville e85 is pretty much out(I cant think of a single pump off the top of my head) I run 880's on 93octane. Theoretically 370's duty cycle out at ten psi on a t3 meaning he needs at least 740cc to run 20 psi on pump gas(turbo depending obviously), I dont see a problem having a little extra fuel.
Always been curious about a turbo altima nice work!
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
YEP! no e85 anywhere I have found. I'm running 850cc injectors so I have plenty of fuel for the pressure I'm going to run. The car has been turboed for the last 12-13yrs. But it's time to make bigger power and have more fun. The Manifold is from RevHard but again I bought it back in 2000 when I first started on the project.
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
Re: After waiting for 4+yrs....
850cc aren't even that big. E85 you'll need a lot bigger!! Keep up the good work
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
In case you missed it... there's no E85 in Jacksonville so..... 850cc is plenty big enough! Thanks and I'm hoping to get this nailed down soon.
Re: After waiting for 4+yrs....
Ok revhard was my thought just dont see them anymore lol
Just a heads up, chevy dealer did a test a few years back after increased rubber fuel parts failures, sure enough the ethanol content they found was in some(most) cases more than double the 10% stickers placed on the pump! highest was 24% I'll save the rant on this.. This will have an effect on tuning.
Just a heads up, chevy dealer did a test a few years back after increased rubber fuel parts failures, sure enough the ethanol content they found was in some(most) cases more than double the 10% stickers placed on the pump! highest was 24% I'll save the rant on this.. This will have an effect on tuning.
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
I love this manifold. Its the only one I've tested that fits with the alternator so close. Tru dat about ethanol! But I just learned last night that the Sunoco on Beach Blvd here in Jax has 100 octane so I'll be getting a few gallons of gas for fun soon!
Re: After waiting for 4+yrs....
Yeah I was going to mention the sunoco! Huffman got away with a rushed rom tune(timing a little aggressive for my taste) on that stuff, think he did a few events till his nistune came back.
we have a few non ethanol pumps around but it only comes in 89(marine grade)..
we have a few non ethanol pumps around but it only comes in 89(marine grade)..
-
- Knows Some Stuff About 240's!
- Posts: 463
- Joined: Thu Sep 09, 2010 5:45 pm
- Location: Las Vegas
Re: After waiting for 4+yrs....
wow nice my fiancee altima gets a lot of crap too lol.
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
You may be one of the few that have had their Altima longer than me lol....bought my '93 (build date of fall '92) in 2000 and still runs great but plan to retire it this year. Keep up the nice work.
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
same here om the build date...... the owners manual still calls in a Stanza Altima lol. yes I've own this car since 1997 and its been boosted since 2000. She still has a lot of lift in her so mine isn't retiring anytime soon
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
Altima is getting it's manifold and Turbo are out getting sandblasted and ceramic coated... Still fighting the Consult issues with the Calumsult RTv2 ECU and now I have the 240 to keep me busy as well. Will post pix after mani is cleaned up
- S14wayz
- Knows Some Stuff About 240's!
- Posts: 419
- Joined: Wed Apr 24, 2013 11:11 am
- Location: BC, Canada
Re: After waiting for 4+yrs....
was that all bird **** or tree sap lol? Looks good man glad you kept your interest up on it after that amount of time
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
80% bird.......... 15% tree..... 5% God only knows!
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
Re: After waiting for 4+yrs....
hahaha wow bro u got sh|tted on. you now have a FWD KA-T and RWD KA-T.... thats pretty bossy.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
Rwd SR20det..... wish this Bisssh was a KA-T.... would have had less issue lol
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
Re: After waiting for 4+yrs....
sometimes i am retarded huh. i guess i just want it to be a KA in my head.
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
-
- 240sx Wannabe
- Posts: 165
- Joined: Thu Oct 19, 2006 6:54 pm
- Location: North FL
Re: After waiting for 4+yrs....
That makes 2 of us son.....
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
Re: After waiting for 4+yrs....
i was purty impressed in that sr at 16psi
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s