May as well start a new thread for new ride.
-
- Dont Question My Nissan Knowledge
- Posts: 556
- Joined: Fri Oct 15, 2004 11:58 am
- Location: Vancouver, BC
May as well start a new thread for new ride.
Hello KA-T, long time no read....
Finally got this on the street today:
Its so nice to be back in a 240! It's been about 5 or so years? This is my first S14 after having owned 7 S13's, and 4 of those KA-T of different sorts.
I will post up a full mod list later. I'm a little rusty and have a few Q's I'm sure.
Finally got this on the street today:
Its so nice to be back in a 240! It's been about 5 or so years? This is my first S14 after having owned 7 S13's, and 4 of those KA-T of different sorts.
I will post up a full mod list later. I'm a little rusty and have a few Q's I'm sure.
Re: May as well start a new thread for new ride.
Looking good...
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Re: May as well start a new thread for new ride.
Oh I like this. Pop the hood bro
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
- R34SR
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1961
- Joined: Thu Sep 25, 2008 6:09 pm
- Location: Florida
Re: May as well start a new thread for new ride.
you just cant run from the sweet simplicity of a 240....its the #1 reason i still have my s14.
MEGASQUIRT 2 PNP
AEM IGN1A COILS
EAGLE-ARP-SUPERTECH 9:1 KA24DE
BW S257 SX-E .78AR
ID1050x Injectors
Full Race twin scroll manifold
ISIS FMIC
Mazworx z32 tranny swap
CTS V CALIPERS
STANCE LX+ Coilovers
J30 LSD
AME FS01 WHEELS 18X9 +25
AEM IGN1A COILS
EAGLE-ARP-SUPERTECH 9:1 KA24DE
BW S257 SX-E .78AR
ID1050x Injectors
Full Race twin scroll manifold
ISIS FMIC
Mazworx z32 tranny swap
CTS V CALIPERS
STANCE LX+ Coilovers
J30 LSD
AME FS01 WHEELS 18X9 +25
TinyT wrote:for the love of god, post your setup, do you really think you can get an answer after saying HI ME CAR HAS TURBO NOW BUT I CANT BWAAA PSHH WITH IT WHATS WRONG
-
- Dont Question My Nissan Knowledge
- Posts: 556
- Joined: Fri Oct 15, 2004 11:58 am
- Location: Vancouver, BC
Re: May as well start a new thread for new ride.
Okay the jist of the mod list:
Suspension:
• Whiteline springs
• KYB AGX adjustable dampers front, Koni sport yellows in the rear
• Whiteline adjustable sway bars front and rear
• Whiteline eccentric camber bushings for RUCA
• Whiteline rear subframe lock kit
Wheels and Tires:
• Club Linea concave 3 spoke 18*9 front, 18*10.5 rear
• Tires: Vredestein Sessanta Ultrac 255/35 and 225/40
Brakes:
• Aluminum 300zx 28mm front brake calipers
• KVR cross drilled rotors
• Hawk HPS pads all around
• PDM SS front brake lines
Engine:
• Custom Log exhaust manifold
• Garrett T3 turbocharger
• Tial wastegate running a 5.5 pound spring
• Manual boost controller: spring and ball type, set to 0.6 bar (8.8psi)
• 2.5" down pipe wrapped with header tape
• 3” catalytic converter
• Blitz Nurspec SS 3” cat-back exhaust system
• Blitz boost gauge
• Blitz Super Sound blow off valve
• 12" 24" 3" aluminum intercooler with 3" piping
• JGS turbo oil feed and drain line kit
Engine Management:
• PLX m300 wideband oxygen sensor and display
• Apex’i Super Air Flow Computer 2
Fuel System:
• Nissan 370CC side feed fuel injectors
• Z32 Fuel Filter
• Walbro 255lph fuel pump
Exterior:
• OEM 240sx “kouki” side skirts
• Greddy Gracer front chin spoiler
Interior:
• OEM leather
• R32 gtr drivers seat
• M’s mahogany mid corn steering wheel
• NRG quickrelease
• Sony bluetooth headunit
• PPI amp with 10” JL sub in quick-release sub box
Need to do list:
• Re-do the street tune, its currently tuned to pass emissions.
• fix minor oil leaks.
• finish breaking in the new 6 puck clutch
• crank the boost to 1 bar
• proper alignment
• clean up the engine bay
• POSSIBLY change the wheels... I could go either way with them....
Suspension:
• Whiteline springs
• KYB AGX adjustable dampers front, Koni sport yellows in the rear
• Whiteline adjustable sway bars front and rear
• Whiteline eccentric camber bushings for RUCA
• Whiteline rear subframe lock kit
Wheels and Tires:
• Club Linea concave 3 spoke 18*9 front, 18*10.5 rear
• Tires: Vredestein Sessanta Ultrac 255/35 and 225/40
Brakes:
• Aluminum 300zx 28mm front brake calipers
• KVR cross drilled rotors
• Hawk HPS pads all around
• PDM SS front brake lines
Engine:
• Custom Log exhaust manifold
• Garrett T3 turbocharger
• Tial wastegate running a 5.5 pound spring
• Manual boost controller: spring and ball type, set to 0.6 bar (8.8psi)
• 2.5" down pipe wrapped with header tape
• 3” catalytic converter
• Blitz Nurspec SS 3” cat-back exhaust system
• Blitz boost gauge
• Blitz Super Sound blow off valve
• 12" 24" 3" aluminum intercooler with 3" piping
• JGS turbo oil feed and drain line kit
Engine Management:
• PLX m300 wideband oxygen sensor and display
• Apex’i Super Air Flow Computer 2
Fuel System:
• Nissan 370CC side feed fuel injectors
• Z32 Fuel Filter
• Walbro 255lph fuel pump
Exterior:
• OEM 240sx “kouki” side skirts
• Greddy Gracer front chin spoiler
Interior:
• OEM leather
• R32 gtr drivers seat
• M’s mahogany mid corn steering wheel
• NRG quickrelease
• Sony bluetooth headunit
• PPI amp with 10” JL sub in quick-release sub box
Need to do list:
• Re-do the street tune, its currently tuned to pass emissions.
• fix minor oil leaks.
• finish breaking in the new 6 puck clutch
• crank the boost to 1 bar
• proper alignment
• clean up the engine bay
• POSSIBLY change the wheels... I could go either way with them....
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
Re: May as well start a new thread for new ride.
Very clean, welcome to the DOHC club. Maybe some meth injection?
Last edited by hotbox240 on Sun Apr 13, 2014 3:40 pm, edited 1 time in total.
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Re: May as well start a new thread for new ride.
Those wheels are sexy, keep them!
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
-
- NooB
- Posts: 6
- Joined: Sun Mar 08, 2009 7:00 am
Re: May as well start a new thread for new ride.
Nice! Not feeling the wheel but better than my car!
- shift_down
- SuperMod
- Posts: 1833
- Joined: Mon Nov 28, 2011 11:00 am
- Location: tulsa oklahoma
Re: May as well start a new thread for new ride.
This is what I love about cars, everyone has their own thing, and everyone expresses themselves differently using their cars.mitcheyismyname wrote:Nice! Not feeling the wheel but better than my car!
Come at me bro
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Fast
Reliable
Cheap;
You can only pick two, so choose wisely!
My build thread: viewtopic.php?t=57539
Re: May as well start a new thread for new ride.
I actually think those wheels are pretty cool...kindof reminds me of a hi tech/stealth version of the old 'Trios' for any that remember those back in the 90s?
All black wheels look really good with that color!
All black wheels look really good with that color!
Re: May as well start a new thread for new ride.
.
YES! Back on the street!
I'm liking those wheels a LOT! and the wheel fitment seems to be "on-point" in my opinion- not too wide, but just right... well done.
I don't think you should change them; mainly because they are very unique (in my opinion at least) and I think the car pulls off their look quite well.
.
YES! Back on the street!
I'm liking those wheels a LOT! and the wheel fitment seems to be "on-point" in my opinion- not too wide, but just right... well done.
I don't think you should change them; mainly because they are very unique (in my opinion at least) and I think the car pulls off their look quite well.
.
.
For SALE !!! >>http://www.ka-t.org/forums/viewtopic.ph ... 44#p537044 <<
Buildthread: http://www.ka-t.org/forums/viewtopic.ph ... 46#p537046
instagram: @cleantune / @siks_tehn_racing
For SALE !!! >>http://www.ka-t.org/forums/viewtopic.ph ... 44#p537044 <<
Buildthread: http://www.ka-t.org/forums/viewtopic.ph ... 46#p537046
instagram: @cleantune / @siks_tehn_racing