How Much HP Can I Get?

Basic tech questions such as future setups, different turbo kits, car diagnosis, etc
Post Reply
240Silvia
Learners Permit
Posts: 14
Joined: Wed May 14, 2014 2:04 pm

How Much HP Can I Get?

Post by 240Silvia »

Ok so here is my build:

*Eagle H Beam Rods
*Wiseco 9:1 Forged Pistons
*Brian Crower Dual Valve Springs With Titanium Retainer Clips
*Clevite 77 Rod Bearings
*ACL Main bearings
*Walbro 255lph fuel pump
*Adjustable fuel pressure reg
*Bosch 850cc top feed injectors
*AEM EMS series 2
*Holset HX35 twin scroll T4 turbo
*Stainless steel top mount manifold
*AEM fuel rail
*Aluminum lightweight flywheel
*Brian Crower Stage 3 race cams
*3" Exhaust with Magnaflow can
*Stage 5 6 puck ceramic and kevlar clutch
*ARP Head studs
*Tial 50MM BOV
*Tial 44MM Wastegate
*Apexi AVCR boost controller
*Coil Packs
*12X36X3 FMIC 3" piping

everything in the motor is brand new. Im looking to get 500~ HP Could i make more?
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Re: How Much HP Can I Get?

Post by shift_down »

You will need a bigger pump and injectors
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
240Silvia
Learners Permit
Posts: 14
Joined: Wed May 14, 2014 2:04 pm

Re: How Much HP Can I Get?

Post by 240Silvia »

what would you recommend for injector size? and lph rating?
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Re: How Much HP Can I Get?

Post by shift_down »

It depend on the type of fuel you will be running. If you have e85 available, get a set of 1600cc or 2000cc injectors with something like a 320 lph fuel pump.

If you do 93 or 91 octane, maybe 1000cc will suffice with a 320 lph also. And I don't know how big your rail is, but a beer can -8 would be awesome.
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
User avatar
street_240sx
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1923
Joined: Sun Feb 10, 2008 7:31 pm
Location: 520 AZ

Re: How Much HP Can I Get?

Post by street_240sx »

You could get a solid 6......and I don't mean 600 lol jkjk it's honestly hard to determine power just from someone's build. It depends on the tune and conditions but could do 400/500 range
03 evo8 gsr: stroker 2.3 ;)

04 evo8 gsr: totalled

96 integra gsr: sold

89 s13 coupe: stock dohc, gt3076, megasquirt

started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
User avatar
airman
KA-T.org OWNER
Posts: 2144
Joined: Tue Jun 16, 2009 12:51 pm
Location: Anderson, SC

Re: How Much HP Can I Get?

Post by airman »

Those 850cc injectors will run out on you on regular 93 around 400whp. The HX35 and your Walbro 255 will run out close before 500hp. Your stage 3 cams are helping your top end there, though.

Injectors are getting cheaper now though! Found a used set of siemens 2250cc for just about $500, good for E85 too.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
User avatar
street_240sx
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1923
Joined: Sun Feb 10, 2008 7:31 pm
Location: 520 AZ

Re: How Much HP Can I Get?

Post by street_240sx »

I think the home could do more than 500, especially t4. Fuel pump could go with an or mk4 supra or the aem one. I would think 850 could do more than 400hp. On evo 550cc are good to mid 300
03 evo8 gsr: stroker 2.3 ;)

04 evo8 gsr: totalled

96 integra gsr: sold

89 s13 coupe: stock dohc, gt3076, megasquirt

started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
User avatar
airman
KA-T.org OWNER
Posts: 2144
Joined: Tue Jun 16, 2009 12:51 pm
Location: Anderson, SC

Re: How Much HP Can I Get?

Post by airman »

Ah didn't realize T4 Twin scroll. Maybe a little more, then. At 20psi on my T3 HX35 I was sitting around 400whp and injector duty cycle on 93 somewhere in the 80% range. This was on Precision 85lb injectors. I wouldn't feel comfortable going much higher on the duty cycle where I keep my tune - a boost spike could starve fuel since injectors can't keep up.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
User avatar
street_240sx
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1923
Joined: Sun Feb 10, 2008 7:31 pm
Location: 520 AZ

Re: How Much HP Can I Get?

Post by street_240sx »

Yea 80-85% is where I'd like to keep my duty too but some push it higher
03 evo8 gsr: stroker 2.3 ;)

04 evo8 gsr: totalled

96 integra gsr: sold

89 s13 coupe: stock dohc, gt3076, megasquirt

started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
240Silvia
Learners Permit
Posts: 14
Joined: Wed May 14, 2014 2:04 pm

Re: How Much HP Can I Get?

Post by 240Silvia »

so i should use 1200cc injectors, what would be the max power this son of a bi*ch can put out.
User avatar
airman
KA-T.org OWNER
Posts: 2144
Joined: Tue Jun 16, 2009 12:51 pm
Location: Anderson, SC

Re: How Much HP Can I Get?

Post by airman »

I'm going to say the Walbro 255 will take you to around 500 assuming you're running E85 and know exactly what you're doing on the tune.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
Post Reply