S13 ka-t Venezuelan project
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
S13 ka-t Venezuelan project
Hi folks, Along time without posting, I have a S13 that I bought 2 years ago, but I wasn´t thinking about doing any mods, then I´ve registered in this forum and saw so many amazing project that I couldn´t resist to do the same, I must say, Its a very difficult project due to the country where I live, every part must be imported, and each Venezuelan citizen has a limitation to buy only 300$ per year over internet, but talk about that would be a little off topic, so here is my project, this is the car when I bought it and then started to mod it a little
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
- beercandrifter
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2271
- Joined: Fri Oct 27, 2006 7:57 am
- Location: Melbourne, FL
Re: S13 ka-t Venezuelan project
I think my car came with those same exact indiglo face plates on the gauge cluster!
You have done a nice job on the car so far. The tablet is such a nice feature of the megasquirt units, don't you think? i love using mine in the car
You have done a nice job on the car so far. The tablet is such a nice feature of the megasquirt units, don't you think? i love using mine in the car
91 240sx Hatch: HomeBrwd
25psi hx35/8.8:1/264^2 cams/95lb injectors/Megasquirt 2/ka24de build **RIP**
T56/4.8 LSx/LS9 Cam/60lb injectors/comp 918 springs/Megasquirt 3/all custom wiring
25psi hx35/8.8:1/264^2 cams/95lb injectors/Megasquirt 2/ka24de build **RIP**
T56/4.8 LSx/LS9 Cam/60lb injectors/comp 918 springs/Megasquirt 3/all custom wiring
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Yes, its amazing, to be honest I wasn´t impressed with MSPNP2, but I was a completely noob in that area, when I started to deal with this unit, I ended loving it to dead hehe, I´ve switched from indiglo to a HUD cluster with projector and a DCC complete swapbeercandrifter wrote:I think my car came with those same exact indiglo face plates on the gauge cluster!
You have done a nice job on the car so far. The tablet is such a nice feature of the megasquirt units, don't you think? i love using mine in the car
This is the paint job that I did to the engine bay
Re: S13 ka-t Venezuelan project
Nice trigger wheel. How are you going to mount the VR sensor? Keep up the good work.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Actually Im going to use a Hall sensor, common Hall sensors works with 0-5v signals and I´ve found that B15 Crank sensors works like our CAS giving an output signal of 0-12v wich I already bought for testing purposes and confirm it workssupakat wrote:Nice trigger wheel. How are you going to mount the VR sensor? Keep up the good work.
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Looks pimp...reminds me of knight rider for some odd reason.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
supakat wrote:Looks pimp...reminds me of knight rider for some odd reason.
Hahaha
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Just a little update, Ive confirmed that nissan keeped the way that cam and crank sensor works, at least they did with b15, I will do some testing with the sensor mounted near the crank pulley and connecting it with one of the wires of distributor and see how my mspnp2 reacts lolsupakat wrote:Nice trigger wheel. How are you going to mount the VR sensor? Keep up the good work.
Re: S13 ka-t Venezuelan project
Good luck. Would like to see this work as it opens up a lot of development. I would like to get rid of the dizzy for a true crank trigger.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: S13 ka-t Venezuelan project
This otta be good !
Re: S13 ka-t Venezuelan project
That sure doesn't seem to be slowing you down that much. Looking good so far!240sx-venezuela wrote:..each Venezuelan citizen has a limitation to buy only 300$ per year over internet...
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: S13 ka-t Venezuelan project
WAIT WHAT?!240sx-venezuela wrote:..each Venezuelan citizen has a limitation to buy only 300$ per year over internet...
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
adamky wrote:That sure doesn't seem to be slowing you down that much. Looking good so far!240sx-venezuela wrote:..each Venezuelan citizen has a limitation to buy only 300$ per year over internet...
Time, effort and some used parts LoL
Cute240sxGuy wrote:240sx-venezuela wrote:..each Venezuelan citizen has a limitation to buy only 300$ per year over internet...
WAIT WHAT?!
Yeah man, thanks God I can use some bucks from my Mom and Dad, and my wife
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: S13 ka-t Venezuelan project
I did not know of this and it seems really strange to me lol (california). That's pretty cool of your family/gf to let you borrow some of their bucks.240sx-venezuela wrote:Yeah man, thanks God I can use some bucks from my Mom and Dad, and my wife
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Yeah, Its cool because I pay them with local currency.Cute240sxGuy wrote:I did not know of this and it seems really strange to me lol (california). That's pretty cool of your family/gf to let you borrow some of their bucks.240sx-venezuela wrote:Yeah man, thanks God I can use some bucks from my Mom and Dad, and my wife
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Had a great oportunity to buy an used Chasebays wiring harness very cheap, 150$ from a very good friend, he installed this wiring and his car didn´t run because the tps comes wired for universal type, but the technician didn´t know that, after changing all sensors, the tech guy maybe (**** guy) said that he didn´t know were the problem was, then my friend toke the car to another technician and bought a Wiring Specialties and it runs fine, the the tech guy saw were the problem was and intalled the wires correctly and problem solved.
I must say this wiring is awesome, its very light compared to stock, weight less than half the stock does.
I must say this wiring is awesome, its very light compared to stock, weight less than half the stock does.
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Re: S13 ka-t Venezuelan project
Now correct me if I'm wrong but you have the stock pressure sensor on the end and an aftermarket on the side? Where do you plumb in your feed line?
Josh
Josh
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
You are right, aem oil pressure sensor on the side and stock on the end, just in case, sometimes its easier to see a no pressure light on than seeing numbers and decide if its low or not.240Life wrote:Now correct me if I'm wrong but you have the stock pressure sensor on the end and an aftermarket on the side? Where do you plumb in your feed line?
Josh
For the oil feed I've removed an insert nut that is placed in the oil filter block, then threated to 10mm, putted an AN3 fitting with a braided steel clutch line wich is AN3 too, Ill post some pics for best explanation
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: S13 ka-t Venezuelan project
This one here correct?240sx-venezuela wrote:You are right, aem oil pressure sensor on the side and stock on the end, just in case, sometimes its easier to see a no pressure light on than seeing numbers and decide if its low or not.240Life wrote:Now correct me if I'm wrong but you have the stock pressure sensor on the end and an aftermarket on the side? Where do you plumb in your feed line?
Josh
For the oil feed I've removed an insert nut that is placed in the oil filter block, then threated to 10mm, putted an AN3 fitting with a braided steel clutch line wich is AN3 too, Ill post some pics for best explanation
- 240sx-venezuela
- 240sx Wannabe
- Posts: 182
- Joined: Wed Sep 07, 2011 11:52 am
- Location: Maracaibo, Venezuela
Re: S13 ka-t Venezuelan project
Thats the right one
- Cute240sxGuy
- 240sx Wannabe
- Posts: 172
- Joined: Sat Oct 10, 2015 3:00 pm
Re: S13 ka-t Venezuelan project
Would you happen to know the thread pitch on that? I'm guessing 1/8 NPT?240sx-venezuela wrote:Thats the right one