Not a bad day at the dyno today.
I stopped at 843 when I blew the weld on my intake manifold. You won't see the 843 graph because I forgot to clamp the dyno pick up signal after regapping the spark plugs but the dyno still recorded the pull. Still more left in the motor but I'm gonna leave it right there after repairing the weld on the intake. I honestly didn't even get a chance to advance timing either.
ERU performance (Engines R Us) long block with custom ERU Pistons made by Wiesco
Ported Head by Jay Ruffer (Titec)
Super Tech 84lbs. Dual Valve Springs
BC STG 3 cams
JWT Cam gears
11mm L19 head studs
6766 twin scroll turbo .96 A/R
Fuel Injector Development 2000cc injectors
ECU Master Standalone flex fuel setup for sequential injection and ignition
Twin Walboro 450 fuel pumps
ATI Dampener
Kenne Bell Boost a Spark
OS Giken Triple disc
Z32 tranny
Stock water pump, a/c, & power steering
Custom Turbo and intake manifolds
Here is what the intake looked like after that pull.
843whp 40psi
-
- KA-T.org Featured Ride
- Posts: 890
- Joined: Fri Mar 26, 2004 12:55 am
- Location: Denton, TX
- Contact:
843whp 40psi
Last edited by duncan351 on Mon Jun 05, 2017 6:52 pm, edited 3 times in total.
843whp @ 40psi
761/596 Tq 33psi 6766
http://www.enginerebuild.net
"Anyone can make power but how long can you make it last?"
761/596 Tq 33psi 6766
http://www.enginerebuild.net
"Anyone can make power but how long can you make it last?"
-
- Dont Question My Nissan Knowledge
- Posts: 597
- Joined: Sat Mar 23, 2013 9:57 am
- Location: lumberton, NC
Re: 843whp 40psi
Jb weld and your good...lol..she's bad bro.
Re: 843whp 40psi
Damn, homie. That's some good sh!t right there. Are you still doing the tuning yourself?
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
-
- KA-T.org Featured Ride
- Posts: 890
- Joined: Fri Mar 26, 2004 12:55 am
- Location: Denton, TX
- Contact:
Re: 843whp 40psi
Thanks guys. Yea I do all my own tuning. I honestly left more power on the table. Never even had a chance to add more timing or make any more adjustments due to the intake. One of these days I may play with it again on the dyno but I okay with these numbers.
843whp @ 40psi
761/596 Tq 33psi 6766
http://www.enginerebuild.net
"Anyone can make power but how long can you make it last?"
761/596 Tq 33psi 6766
http://www.enginerebuild.net
"Anyone can make power but how long can you make it last?"
- s14fiend
- Knows Some Stuff About 240's!
- Posts: 344
- Joined: Wed Feb 09, 2005 7:53 pm
- Location: Miami, FL
Re: 843whp 40psi
FNF reference ..... I had to.... ROFL!
Re: 843whp 40psi
Good work bro!!!
-
- Driving Mom's Station Wagon
- Posts: 29
- Joined: Fri Feb 10, 2012 8:22 pm
- Location: Long island NY
Re: 843whp 40psi
Nice numbers tho