Aem Fic on ka24det

Discussion about ECU Tuning Products and Theories

Aem Fic on ka24det

Postby tannerezell077 » Thu Feb 22, 2018 11:19 pm

I recently just bought a aem fic for my 240sx running a stock ecu with stock injectors, single cam maf(also have z32), walboro 255, fuel pressure regulator 1;1, fmic, t3 turbo. Im wondering if anyone has any info on wiring the fic up to my ecu? I've read on some other forums it not too complicated accept for the cam and knock sensor areas.
tannerezell077
Learners Permit
 
Posts: 9
Joined: Mon Feb 12, 2018 10:01 pm

Re: Aem Fic on ka24det

Postby nelson240sx » Tue Jul 31, 2018 8:16 pm

It's pretty straight forward, just get the Pinout for your ecu and take it one step at a time. It's the same as wiring a safe with the addition of a few extras. Worked well for a piggy pack ecu.

I didn't wire in th knock sensor and as for the cam sensor, just cut it before the split in the harness (it splits to two pins on the stock ecu).
KA24E-T 06/06 to 10/09 (T25 then H1C Holset) - sold
KA24DE-T 12/09 to 10/11 (T4/TO4E) - sold
KA24DE-T 11/14 to 8/15 (T4/TO4S BB) - sold
SR20DE-T exo-car build 06/13 to current (EFR6758) - swapped
^ now VH45DE-T (Billet T04S BB)
Miata 1.8 turbo 9/15 to 3/17 (VF39) - sold
KA24DE-T build 8/17 to current (EFR6758)
Burning corn since '09
http://www.e85forum.net
User avatar
nelson240sx
Belongs To The TOP CONTRIBUTING MEMBERS!
 
Posts: 2013
Joined: Tue Nov 08, 2005 7:32 pm
Location: Indy


Return to ECU Tuning

Who is online

Users browsing this forum: OnTheChip and 44 guests