My Australian 1997 D22 KA24e turbo build.

For those truckers!

My Australian 1997 D22 KA24e turbo build.

Postby UnknownNugget » Mon Jul 23, 2018 7:41 pm

Ive been doing tons of research regarding turboing the ka24e motor.
But it looks like the forum seems pretty dead?
So feel free to follow up on my thread to give me tips and advice about it as I go through headaches for a bit more power in the navara.

I dont know a lot about turboing engines so.. what to lose!
This is the plans at the moment..
T25/ 28 turbo
Top mount forward intercooler
Cxracing turbo manifold (hopefully available still)
Some sort of fuel & timing control: safc apexi2 & MSD
Fabricating my own intake plenum and to relocate the maf sensor because the D22 ka24e has the throttle, maf and tps with the intake manifold (below the plenum). Not sure if the air temperature sensor will like the increased pressure.

This list doesnt include the turbo oil and coolant lines/ piping and a few other small things to do, YET- I'll start planning on those after I have figured out how much room I have after test fitting the intercooler, turbo and turbo manifold.
But first I have low compression issue to deal with while I buy the parts for the build.
UnknownNugget
NooB
 
Posts: 2
Joined: Mon Jul 23, 2018 7:21 pm

Re: My Australian 1997 D22 KA24e turbo build.

Postby UnknownNugget » Mon Jul 23, 2018 7:52 pm

D22 Navara, this is the only end an old photo I have of it.
Attachments
Screenshot_20180724-125125_Gallery.jpg
UnknownNugget
NooB
 
Posts: 2
Joined: Mon Jul 23, 2018 7:21 pm

Re: My Australian 1997 D22 KA24e turbo build.

Postby johnnynissan » Mon Oct 15, 2018 5:38 am

Hi mate, I also have an Aus delivered D22 that I'm thinking about turbocharging. KA performance parts aren't as common here as the US so I'm really interested in what parts you use for your build.
johnnynissan
NooB
 
Posts: 1
Joined: Mon Oct 15, 2018 5:30 am


Return to Hardbody KA-T's

Who is online

Users browsing this forum: No registered users and 4 guests