www.ka-t.org

Problems, The adapter was not square and caused oil leaks ( high pressure ).it needed to be machined 2 covertors to get good launch and less slippage at speed. I cracked the first housing because i cut the base too much to allow access to the convertor bolt, I keep twisting drive shafts cause the ar...

Get yourself a 91 240sx maf,

What ecu are you useing.?

Sunny S14 , thats the answer.

The Australian Dollar is ****.
1 Aussie = 65 US cents.

NOWS THE TIME TO BUY THAT BMS Valvebody

Dear moderators , we need a new Forum. " Come and bag my post cause you dont like my idea , or my spelling and pronouciation is not quite correct " ****. If you dont want to constructivly add to the topic , DONT add anything. This site is getting like 1 billion others with idea and Grammer...

A Drag D21, The Vg30dett will not phisically fit in the stock configuration., It will require custom exhaust manifolds and cross over pipe , at least. And i never did see a Vg30dett in a engine bay with stock front suspension and inner fenders. Almost the same goes for the Vg30et , and how much reli...

Yes you could use the search button,..or people could answer your question and make the site interesting to read, instead of asking you to search archives of information. If everybody searched all day this site would have like, 2 posts all week. If all you can add is " use the search button &qu...

BUY, BUY , BUY,
NOW.

The Australian Doller exchange rate is ***** up so buy now.
1 Aussie dollar equals 0.66 US

You guy,s all wish you were here in Australia,

Throw another shrimp on the barbie ,!!!!

185 lbs Driver ???

So you are running a stock spring package ( old as well ) with a high lift and high acceleration rate in this stage 2 camshaft.?
This does not sound sensible to me.

SMRacing, or talk to some one that actually has run " gas " succesfully.

Wolf are HUGE here in Australia, the Rotary guys love them and you never hear any complaints, so they must be reliable.
Although like most ECU,s you should probably only buy it if you have someone local experianced in using / tuning them.

Sell your parts and buy more crack.

Your not getting coil bind on the spring package , are you.??

Is the noise at high RPM, low or idle.?

That is down right silly,
The truck will now pull to the left due to the wind resistance, the muffler should always exit the center of the hood.

Incestuous bunch, aren,t you.

Good luck with the shop.

We can all see in the Photo from the cellar , that printing shows that you like the boys, but how about a picture of your shop assistant

" Back in the day "

I had a V8 and i used a "vacupan system " which if you dont know was a venturi valve thingy that was installed in the exhaust collector and connected to the PVC vent hole.

Would this type of thing still work??

Yes , but 1000 separate nude pictures of yourself dont count as legitimate posts.

Nice build up and trick components,
But 510,s ARE GAY.

Hi guy,s

For those of us that can not picture where the dohc knock sensor actually is situated, can some one please take a picture.

Much apriciated.

What e/t or mph are you allowed to run without a BAR or ROLL CAGE ?

This girlfriend of yours, you mean WIFE like, dont you.?
Cause i never had a girlfiend i loved this / that much

And please describe the Alluminium pipe used for the curved sides off you intake .
This was a 100 mm pipe with some radius which you split ,right.?

Looking at those 2 wastegates :
It appears that the gate on the right may be inferior in flow, as it looks that the long internal valve guide may not allow the valve to open / stroke high enough.

Does anybody have a link to Titainium retainers for the SOHC
Thanks

Just as a reference for us Hardbody drivers,
What diameter outside diameter are the 240sx lines ,feed and return.?? So i can compare.

As i am dreaming of 450 Rwhp and if i can just use a Big Walbro and keep it all simple that would be cool.

Thanks

I beleive that excessive plenum is overpriced and damm ugly , but thats just my opinion. I want to build one like , sm racing, just to name a few . i just cant find the post they had. The design appears logical and not too ...difficult to make. and then weld the damn plenum to the original runners. ...

I also have a Q45 throttle body !!!!

They dont make threads like they used too.!