www.ka-t.org

. That's great you figured out the WG stuff. Sounds like the screws will stay in place better now too. Hah, yeah I'd imagine even 12 psi feels "slow" now that there aren't any major leaks in the WG, but now A/F ratios will be more consistent and the engine response should be more predictab...

Man, sorry to hear that. Is the WG line collapsing with heat or pinching? A long time ago when I was looking for vacuum lines I stumbled upon a company that makes a thick-walled silicone vacuum hose: http://www.boostcontroller.com/TurboLogic-Silicone-Vacuum-Hose-s/2128.htm The lines I'm using are su...

I would check for loose wires going to the ECU (or to where ever the noise is coming from). As for the steering, I would make sure there are no loose parts or excessive play in steering components. Then I would check for obstructions (like Adam said). Maybe check out the power steering system too fo...

http://www.clubloose.com/clubloose/

"Tuner Evolution Philly" Saturday July 29th 2017; $55 for vehicle registration, $85 for vehicle registration w/ access to electric, $35 for Ruckus registration, $25 admission at door, $20 admission online, kids 7-12 $10, 7 and under $FREE, Greater Philadelphia Expo Center at Oaks https://w...

"Hyperfest / Street Driven/ Tuner Evolution" Saturday May 20th, 2017; $25 at door admission, $20 online admission, $Free kids 12 and under; Vehicle Reg $55 w/ pass only for driver, $35 ruckus reg (all registered (reg) vehicles require prescreening approval; (**also I believe there are spot...

"Panda Junction" Sunday May 7th, 2017; $25 for VIP (pending approval), $20 for admission; 873 Long Drive (Ripken stadium), Aberdeen, MD
https://www.tuner-evolution.com/inde.../pandajunction

Originally posted by 6YMazda on WFC, I'm just passing on the word :) "The car club, Nu Conceptz, is hosting our 5th annual Spring car show on April 30th, 2017 at Osbourn Park High School in Manassas, VA. Our venue has parking for up to 700 vehicles. We invite all cars, bikes, and trucks to com...

I know I'm 2 years late to this conversation, but most hydraulic parts suppliers can probably help with this. There is a hydraulic store I know of that has a small selection of end fittings and hose and one just selects the fittings and lengths and then they will make them. There is a local track ca...

This is an opportunity to shorten, or get rid of the 25 year wait for importing cars that did not make it to the U.S. car marketplace. This petition was created on Feb 1, 2017 and will need 100k signatures before March 3, 2017. A signature is completed by just typing name and email address and then ...

Ballin. I was close to buying one of those after I spun a bearing in my last motor. The problem was that you have to choose between a manual or electric shutoff. The electric would be the way to go for a street car, since you could hook it to the ignition switch for auto shut-off and priming. But a...

Nice work on the custom mounting bracket! That Nismotronic system seems like it was a great investment; just seems like it has so much capability and room to adapt to new modifications.

. The weather isn't ideal for painting at the moment, so to keep the momentum going, figured I'd start mapping out the plumbing and mounting locations for the accusump. Most of the "main" components are shown below and consist of: -Canton Racing 3qt accusump (w/ 1/2" NPT female thread...

. Just wanted to see how 2F Performance 50mm overs fit... couldn't get the tape to hold the bottom against the body, so in the picture the bottom edge is out away from the body a few inches. Everything lines up very well with the body and the fender is thin, so it's very lightweight and flexible if ...

Nice Work!!!

Awesome build brotha. And very informative. Keep them coming! ^thanks! :D One of the goals of this thread has been to share new ideas and document various obstacles and their solutions, in hope that if anyone else comes across a similar problem or is interested in a particular part that is used, th...

. Bumper fiitted. Unfortunately the bumper has been scraped many times already (not on purpose of course; and even with the "monster truck" ride height). The bottom of the bumper bar rests tightly against the inner surfaces of the front bumper (top and bottom) though, so this has helped pr...

Wow, you've been busy! Giving us all motivation to continue to learn new things, progress and update :D That Nismotronic stuff looks really cool. I've always wanted to get into tuning myself, but lost motivation with some bad experiences in that happened in the past. Is this stuff difficult to learn...

Thanks for the input, I'm leaning towards the darker color as well. I would hope temp diff wouldn't be much different. Ideally, I'd like to paint it a dark matte black color for both glare and to improve visibility outside of the cabin; I'm just stuck because some people I talk to say that it would ...

^ fingers crossed, really hoping it was just those bad bearings. The shop I took the FLCAs to to replace the bearings did something when they installed the new bearings that made the bearings tight; a lot tighter than the new bearings were too. The new bearings would move when light pressure was app...

What about rock auto? They were out last time I checked, but I signed up for their news letter and they said they have restocked them.

How much is it leaking? I have had some success with Lucas Power steering "stop leak" solution. I think its just a higher viscosity PS fluid, then I mixed it with some Auto trans fluid as recommended. Also, have you checked O'Reilly auto parts? This is where I bought my remanufactured rack...

Have you ever considered swapping out the KA in favor of a different motor? If so, why, which motor, and what made you want to keep the KA motor? I know, I know, kind of a "guilty confessions" type of question haha because I think we all know the answer: "nah, of course not, of course...

. Well that was quick, think this may be the problem: https://www.youtube.com/watch?v=XWzUNVfV9oQ Some updates: Looking to extend the bump stops or maybe wheel spacers? http://i627.photobucket.com/albums/tt352/cleantune2/Mobile%20Uploads/1103161822b_HDR_zpsu35rrfez.jpg http://i627.photobucket.com/al...

I had the same problem (completely different car) where the wheel bearings had died and damaged the hub slightly. Even with brand new bearings there was too much play. The installed bearing felt fine on the ramp but the car would start pulling side to side, like the back end was breaking loose even...

. Whoa, what the... that's scary! Glad to hear you guys were okay and that you got the situation under control quickly. Are there any flexible portions in the hardline setup? I remember watching a video that showed putting a coil in a hardline to give a litttle flexibility to take the stress off of ...

...aaaand how waaasss it?

.

. More updates! I don't think the "alignment "issue" was completely related to the alignment. Everything was aligned again and it felt better driving, but something is still off. The shop owner kept talking about a "death wobble" and I had never felt this driving; although, ...

. That's great to know. Yeah, I was talking to someone recently about fuel setups and from what they were saying, the single pumps can and have adequately handled many high flow fuel setups, without issue. The fuel rail and the injectors look great! I prob would've done the same thing after noticing...

. The front suspension setup is so much more of a balancing act than I had originally imagined. As it turns out the scrub radius may be playing into the strange steering as well, due to the angle of the "kingpin" (main pivot point of the front knuckles). For those who don't already know, w...