Welcome BC/Brian Crower to the site!
-
- Forum Moderator
- Posts: 3724
- Joined: Mon Feb 02, 2004 10:22 pm
- Location: Charlotte, NC
- Contact:
Welcome BC/Brian Crower to the site!
Everyone welcome our newest vendor, BC/Brian Crower to the site.
Most of you are probably already familiar with current BC products for the KA. If not, check out their product offering: https://www.briancrower.com/makes/nissan/ka24de.shtml
They make some of the best race-proven parts for the KA out there (connecting rods, cams, crankshafts, valves, springs, retainers, stroker kits, etc),
I have had the same Crower rods in my car for 5-6 years now and they prove themselves time after time...and I'll know they'll handle the punishment of my new GT42R setup.
Also, I just picked up a Crower stock stroke (96mm) fully counterweighted crank...this thing is beefy as hell and should outlive anything else on the car
If you would like to contact them, here's some info I pulled from the website:
Brian Crower Inc.
P.O. Box 19066
San Diego, CA 92159
619.825.8719 ph
619.825.9675 fx
info@briancrower.com
Most of you are probably already familiar with current BC products for the KA. If not, check out their product offering: https://www.briancrower.com/makes/nissan/ka24de.shtml
They make some of the best race-proven parts for the KA out there (connecting rods, cams, crankshafts, valves, springs, retainers, stroker kits, etc),
I have had the same Crower rods in my car for 5-6 years now and they prove themselves time after time...and I'll know they'll handle the punishment of my new GT42R setup.
Also, I just picked up a Crower stock stroke (96mm) fully counterweighted crank...this thing is beefy as hell and should outlive anything else on the car
If you would like to contact them, here's some info I pulled from the website:
Brian Crower Inc.
P.O. Box 19066
San Diego, CA 92159
619.825.8719 ph
619.825.9675 fx
info@briancrower.com
Being the owner of Ka-T.Org apparently has some bene's hehe.
AWESOME sponsor btw. Nice work on that one Ryan.
FCW crank ftw, i seriously want one of those. Maybe a GB in the future? Lets get a BC rep in here to discuss this. I have heard that some people have been able to get a great price on this crank. I dont want to discuss who and how much, but i know you guys have a bottom dollar.
AWESOME sponsor btw. Nice work on that one Ryan.
FCW crank ftw, i seriously want one of those. Maybe a GB in the future? Lets get a BC rep in here to discuss this. I have heard that some people have been able to get a great price on this crank. I dont want to discuss who and how much, but i know you guys have a bottom dollar.
-
- Knows Some Stuff About 240's!
- Posts: 216
- Joined: Tue Dec 05, 2006 7:28 am
- Location: Statesville, NC
-
- Encyclopedia-Nissan
- Posts: 1014
- Joined: Sun Jan 27, 2008 6:58 am
- Location: new york
-
- 240sx Wannabe
- Posts: 107
- Joined: Thu Jul 19, 2007 7:28 pm
- Location: az
- Contact:
-
- Knows Some Stuff About 240's!
- Posts: 448
- Joined: Sat Oct 08, 2005 2:13 pm
- Trippen
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1592
- Joined: Thu Mar 30, 2006 8:19 am
- Location: Bay Area
- Contact:
Welcome aboard B/C....hummmmm 3k on my motor do I need to rebuild and get a forged crank also...hummmmmmm....Wonder if the wife would miss another 3k sunk into my car....Damn Klattr....Now your going to make me not buy stuff for my kids for xmass....Thanks man
Trippen-
-Boost is like a bad habit the more you do it the more you want it.-
89 240sx se Hatch-NA RS*R race springs w/AGX's
92 240sx se Convertible-(Wifes Car) NA , Tanabe Coilovers..
95 240sx se KA-T Borded .20 over JWT ECU, Z32 MAF, Arias Pistons, Eagle Rods, 50 trim T3/T4 turbo, 50lb MSD, J30 LSD, Custom Drive shaft,D21 flywheel,PLX-R500 and TurboXS Knock lite. 275.5 tq 246hp @14psi
-Boost is like a bad habit the more you do it the more you want it.-
89 240sx se Hatch-NA RS*R race springs w/AGX's
92 240sx se Convertible-(Wifes Car) NA , Tanabe Coilovers..
95 240sx se KA-T Borded .20 over JWT ECU, Z32 MAF, Arias Pistons, Eagle Rods, 50 trim T3/T4 turbo, 50lb MSD, J30 LSD, Custom Drive shaft,D21 flywheel,PLX-R500 and TurboXS Knock lite. 275.5 tq 246hp @14psi
-
- Knows Some Stuff About 240's!
- Posts: 340
- Joined: Sun May 15, 2005 11:54 am
- Location: San Francisco, CA
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 2346
- Joined: Tue Nov 29, 2005 5:23 pm
- Location: Lake Stevens, Wa
quality control increased there? or do your cams still need rediculous amounts of degreeing the get power. i put your "drop-in" stage 2 cams in my car and lost 4 hp and gained 2 ft lbs. then sold them and put in jwt cams and got 20hp. also i know its not just the ka's that need degreeing. ask AMS about thier camshaft shootout in a 4g63 which cams were the worst...? sorry for the bashing but i have to chime in. i sent numerous emails with dyno sheets and i got "something must be messed up with your set-up" and then talked to him in person and asked Brian Crower about it and he said the same thing, then got offended and asked if his cams were so crappy why do people buy them and why am i sold out. hint hint: they are cheap.
Looking For A Holset HX-35