There are 3 longer studs.
the last 2 toward the flywheel are barely showing any threads past the nut.
all studs were hand screwed into block . All bottomed out the block, since the threads were cleaned.
Can i safely just back up the studs alittle for the last 2 studs?
Someone suggested just backing out a few turns on the stud and locktite it
Has anyone ran into this issue?
ARP main studs last 2 are too short
-
- Dont Question My Nissan Knowledge
- Posts: 503
- Joined: Wed Aug 29, 2007 2:41 am