Writeup: S14 to S13 Distributor w/ Crane HI-6 & LX92 Co

Discussion on Turbo electronics including Boost Controller, Turbo Timers, WideBands, etc
Post Reply
BillKlineVT
Dont Question My Nissan Knowledge
Posts: 786
Joined: Wed Oct 13, 2004 10:06 pm
Location: Blacksburg, VA and Barre, VT

Writeup: S14 to S13 Distributor w/ Crane HI-6 & LX92 Co

Post by BillKlineVT »

Just installed this over the weekend. Was a fairly straightforward installation, and the results are definitely noticeable. I wrote this up for the Crane HI-6 because that's what I used, but I'm sure it'd be easy to interpret this for use with an MSD box as well.

Link: http://filebox.vt.edu/users/bkline/docs ... pgrade.pdf
1997 Silver Moss KA-T
GT2871R / Z32 MAF / 550cc Deatschwerks Injectors
BikiRom Daughterboard on a '95 ECU
User avatar
1wheelwonder
Encyclopedia-Nissan
Posts: 1137
Joined: Fri Mar 25, 2005 4:58 pm
Location: Decatur, Alabama
Contact:

Post by 1wheelwonder »

Nice write up Bill, I wired in a Msd 6al btm and blaster coil about 2 weeks ago and the wiring pretty much follows what you did.
Bailniss
Learners Permit
Posts: 11
Joined: Thu Oct 02, 2008 12:42 am
Location: Jonesboro, TN

Post by Bailniss »

great write-up also follows for 6-al systems
User avatar
gtrpryde
240sx Wannabe
Posts: 102
Joined: Thu Mar 30, 2006 7:30 pm

Post by gtrpryde »

This is a very old thread but how would this be different if it were going on an S13?? Thanks
KA24DETS14
Driving Mom's Station Wagon
Posts: 28
Joined: Wed May 20, 2009 2:11 pm

Post by KA24DETS14 »

I am very interested in doing this but the link isn't working. It this possibly posted somewhere else on the internet?
basic
Dont Question My Nissan Knowledge
Posts: 663
Joined: Mon Jul 27, 2009 11:03 pm
Location: Eastern Iowa.

Post by basic »

An old thread, i know - but heres what I found after looking around a bit for anyone else ever wanting to do something similar.

http://www.mediafire.com/?sharekey=4ec1 ... f6e8ebb871
User avatar
Mark Washington
Encyclopedia-Nissan
Posts: 1004
Joined: Thu Feb 25, 2010 6:45 pm
Location: BAY AREA
Contact:

Post by Mark Washington »

Come on? I guess Ill do it the old way.
速い速い シルビア ターボターボ
Its not the size of the turbo,Its how you spool it.
600zxr
NooB
Posts: 2
Joined: Sun May 09, 2010 1:50 pm

Post by 600zxr »

Both links busted. Wish I had seen them before they went T.U.
esahuque
Knows Some Stuff About 240's!
Posts: 297
Joined: Thu May 17, 2007 7:13 pm
Location: Metairie, La

Post by esahuque »

600zxr wrote:Both links busted. Wish I had seen them before they went T.U.
same here, both links are broke
Image
Mamba
240sx Wannabe
Posts: 104
Joined: Wed Mar 28, 2007 9:10 am
Location: Ottawa, On, Canada

Post by Mamba »

anyone have wiring schematic to do this? im looking to conver the s14 dizzy to s13 and wire in the msd 6al-2
any info would help thanks.
tony_s14
NooB
Posts: 4
Joined: Mon Sep 24, 2007 7:59 pm

Post by tony_s14 »

does anyone have this if so let me know very intrested in doing this to my set up please and thank you in advance
User avatar
car6on14
240sx Wannabe
Posts: 179
Joined: Thu Jun 11, 2009 8:56 pm
Location: Scranton PA
Contact:

Re: Writeup: S14 to S13 Distributor w/ Crane HI-6 & LX92 Co

Post by car6on14 »

adding this thread as it has info for wiring and link to s14 dizzy mod, sorry for the bump but this is in the sticky so figured this should be here: viewtopic.php?t=42590
92 Coupe - forged internals - stage 2 cams / ss valves
Aem Series 1 - Billet 50 Trim - ram style manifold- Aero 340
Hydro Ebrake - JSK coilovers - ISIS Rucas - Hicas rack - Ksport BBK
Post Reply