pte6152 dyno
-
- Learners Permit
- Posts: 12
- Joined: Mon Jul 18, 2011 11:44 am
pte6152 dyno
eagle rods arias pistons arp mains and headstuds 248/232 cams on 16 psi made 350 wheel on a dyno dynamics. megasquirt 550cc injectors tial 38mm wastegate.i expected more intercooler core is kinda small its about a foot tall 32 inchs long.is that killin my numbers? putting 264's in it next week
- joshpntbl07
- Knows Some Stuff About 240's!
- Posts: 303
- Joined: Sun Mar 28, 2010 7:41 pm
- Location: wilmington, nc
-
- Learners Permit
- Posts: 12
- Joined: Mon Jul 18, 2011 11:44 am
- joshpntbl07
- Knows Some Stuff About 240's!
- Posts: 303
- Joined: Sun Mar 28, 2010 7:41 pm
- Location: wilmington, nc
I would probably get a bigger intercooler but from what ive read, dyno dynamics actually read lower than dynojets. From the graphs ive seen they are close to mustang dyno numbers. Sounds like your sitting good. Why didnt they give you a graph? Ive heard of people having to pay extra for a graph and even being charged more to have the afr on it. Thats crazy to me. If i pay a shop around $150 an hour for tuning, then I better get a peice of paper with some ink on it for free.
- Kfred
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 3513
- Joined: Sun Oct 29, 2006 8:12 am
- Location: Baton Rouge, LA
Don't try and squeeze too much more power out of your setup. Your 550's are probably on the edge of maxing out.
A 32x12x3 inch intercooler is typically good for at least 500whp before it becomes a significant restriction. So if your core is 3" wide I wouldn't worry about the intercooler right now.
A 32x12x3 inch intercooler is typically good for at least 500whp before it becomes a significant restriction. So if your core is 3" wide I wouldn't worry about the intercooler right now.
RIP Nate(480sx)...
Re: pte6152 dyno
Looks like if you can fix the 23psi spike you might make up some midrange, not much but looks like a little left in there. I'm sure your getting a little out of the range of that turbo over 20psi. Either way those are solid numbers, congrats to you
Re: pte6152 dyno
sicckkkk