ISIS RS3871 @ 12psi ( UPDATE 280whp 340tq )

Dyno Sheets/Results Only! We have a separate forum about ECU Tuning and Theory
User avatar
R34SR
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 1961
Joined: Thu Sep 25, 2008 6:09 pm
Location: Florida

Re: ISIS RS3871 @ 12psi ( UPDATE 280whp 340tq )

Post by R34SR »

IMG_20190611_232724.jpg
Still here, just extremely slow progress guys.....for the past few years I've been working in California and working on the 240 whenever I take time off at my house in florida....I actually got to register, insure and drive her again last month before leaving for work....it's a slow painful process but it is what it is.

Current new setup that you see there is
T3 Holset hx35 .63 backend
Ebay fake tial 38mm wastegate
Mac valve EBC solenoid
Same megasquirt and 750cc injectors
Emusa cast t3 manifold...ported like crazy.

Before you guys go crazy about some of the cheap parts.....I could care less about the wastegate failing since I have full ecu control of overboost scenarios. And I figure it was worth testing ( so far works fine ). The cast log manifold definitely needed a **** of gasket matching...but I paid like $68 for it....I'm pretty confident that as is this setup can pull 350whp....and I have 264 cams on a shelf depending on what power and this produces....if I can get decent spool up and 400whp with this setup and the cams and rev to 7500rpm...I'd be extremely happy. ( I have a built head, supertech valves, titanium retainers and dual springs)
Attachments
IMG_20190614_202651.jpg
IMG_20190609_202106.jpg
MEGASQUIRT 2 PNP
AEM IGN1A COILS
EAGLE-ARP-SUPERTECH 9:1 KA24DE
BW S257 SX-E .78AR
ID1050x Injectors
Full Race twin scroll manifold
ISIS FMIC
Mazworx z32 tranny swap
CTS V CALIPERS
STANCE LX+ Coilovers
J30 LSD
AME FS01 WHEELS 18X9 +25



TinyT wrote:for the love of god, post your setup, do you really think you can get an answer after saying HI ME CAR HAS TURBO NOW BUT I CANT BWAAA PSHH WITH IT WHATS WRONG
Post Reply