12.28 @ 117.61 MPH
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
12.28 @ 117.61 MPH
Finally got a good run down at the local track.
Built bottom end (Brian Crower Rods, Weisco 9:1 Pistons)
Built Head & Crower V3 Cams (Brad D's old head - Cams in stock locations)
Xcessive Intake Manifold (Stock Throttle Body)
ID1000s (Pump 94 octane)
N62 Maf
AMS bottom mount
Comp Turbo TBB T3/T4 - 67/64 (Running 20 PSI)
Ebay Intercooler (31"x12"x3") and exhaust (3")
Nismotronic ECU
Competition Clutch White Bunny 6 Puck
Stock Tranny
235/60/R15s MT ET streets (Aired down to 17 PSI)
AEM Water/Meth Injection (Single 500cc/min nozzle before throttle body)
Haven't played with the launch control on this ECU yet. Be the next thing I try.
Re: 12.28 @ 117.61 MPH
I know this is late as hell, but nice work. Have you played with launch control since this run?
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread
-
- Knows Some Stuff About 240's!
- Posts: 435
- Joined: Sun Nov 12, 2006 8:33 am
- Location: Kansas City, MO
- Contact:
Re: 12.28 @ 117.61 MPH
Man, you got to get them cams degreed! Moar powah just waitin! Good looking setup!
Steve.
Re: 12.28 @ 117.61 MPH
Nice run.
11.49 @ 117.83 MPH on my KA24DR.
Similar MPH but my 60ft is a little faster.
11.49 @ 117.83 MPH on my KA24DR.
Similar MPH but my 60ft is a little faster.
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
Re: 12.28 @ 117.61 MPH
Nice 60 foot. That's all that's holding me back from a 11 sec time slip.
12.43 @ 115.06 - 05/2010
12.28 @ 117.61 - 08/2016
12.28 @ 117.61 - 08/2016