SC help

For those other forced induction brothers
Post Reply
john e
NooB
Posts: 3
Joined: Tue Nov 13, 2012 4:36 am

SC help

Post by john e »

I need help with the vac. And Coolant lines. I'm not running a heater, egr, AAC or IACV. Does anyone have a diagram for the coolant lines and vac lines for this setup or something close
TryingToTurbo
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2369
Joined: Sun Aug 12, 2007 8:24 pm
Location: Raleigh, NC

Re: SC help

Post by TryingToTurbo »

john e wrote:I need help with the vac. And Coolant lines. I'm not running a heater, egr, AAC or IACV. Does anyone have a diagram for the coolant lines and vac lines for this setup or something close
I know this is a month old BUT for future reference:

Assuming you are running stock upper runners, there should be no difference in coolant lines what so ever. You can delete the lines going to the throttle body, and the stock lower plenum just has a piece of a hardline for a heater hose that can be bypassed.

As for vacuum all you need is FPR and brake booster. Booster vacuum source is on the supercharger from the factory. The adapter plate should have threaded holes for barb fittings for the rest.
Built KA24DE: Wiseco 9.0:1 | Eagle H Beams | ARP Head & Main Studs | BC 272s & Springs | Supertech Valves
Boost Source: Under Construction

Image

Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0
john e
NooB
Posts: 3
Joined: Tue Nov 13, 2012 4:36 am

Post by john e »

Thanks man
Post Reply