D22 navara turbo

For those truckers!
Post Reply
navbasher
NooB
Posts: 2
Joined: Sun Oct 16, 2022 6:05 pm

D22 navara turbo

Post by navbasher »

G'day everyone, I've started a turbo build on my Nissan navara d22 1998 ka24e and I've got a couple of questions.
So far I have:
t25 garret turbo
4psi or a 7psi internal waste gate
intercooled
2.5 inch exhaust
air/fuel ratio gauge and sensor
boost gauge and bov
t2 to t3 adapter
engine completely stock with around 250 000kms
I'm planning on running the 7 psi one with the stock injectors, would they be enough?
And as for tuning am I able to run nistune with the stock ecu or would I have to get a different one?
Is there any other ways to tune it that are easier?
Cheers
FoundSoul
KA-T.org Sponsor
KA-T.org Sponsor
Posts: 18
Joined: Fri Sep 12, 2008 6:04 pm
Location: Suwanee, GA 30024
Contact:

Re: D22 navara turbo

Post by FoundSoul »

I would have to double check with my tech support guys (support@diyautotune.com) but there's a decent chance our MSPNP Gen2 (MSPNP-NS9501b) will drop right into that thing. If not, and MS3Pro definitely would do the trick, and nicely, with a ton of features you're not going to get with a factory ECU reflash.

https://www.diyautotune.com/product/meg ... ual-trans/

https://www.diyautotune.com/shop/mspro- ... s3pro-ecu/
Jerry a.k.a. 'FoundSoul'
www.DIYAutoTune.com
Post Reply