ka24de into 87 d21 power steering lines??

For those truckers!
Post Reply
screwnamez
Learners Permit
Posts: 8
Joined: Mon Aug 15, 2011 4:45 pm

ka24de into 87 d21 power steering lines??

Post by screwnamez »

So like the title says, i've got an 87 d21, 4x4, with a ka24de out of a 95 240sx swapped in. I've worked out most of the kinks but i'm not sure where to start with the power steering lines and I was curious to see if any of you have already solved this problem. I was thinking I could go with some AN fittings but i'm not sure of the sizing or if I could adapt them onto the hardline that runs into the fitting that goes to the gearbox, haven't worked with AN before. Any input is appreciated, thanks alot
User avatar
schmauster920
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2612
Joined: Tue Feb 20, 2007 5:25 pm
Location: CA

Re: ka24de into 87 d21 power steering lines??

Post by schmauster920 »

Stainless steel braided hose and AN fittings would prob be the easiest good solution. Running hard lines would be nice, it would be a little extra work but will be a nicer solution in the long run.
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
Post Reply