Please confirm: LS Coil Wiring

http://www.diyautotune.com
Post Reply
cmj
240sx Wannabe
Posts: 129
Joined: Fri Jun 27, 2008 3:12 am

Please confirm: LS Coil Wiring

Post by cmj »

I decided to make a new harness and I've finished it. As I'm going through it with a meter I'm second guessing myself.

I wired the coil logic ground to the MS signal ground. (Same as TPS, CLT, and IAT)

Please tell me this is correct as I've loomed the whole harness like an idiot (before testing it 100%)
User avatar
airman
KA-T.org OWNER
Posts: 2144
Joined: Tue Jun 16, 2009 12:51 pm
Location: Anderson, SC

Re: Please confirm: LS Coil Wiring

Post by airman »

Image

I will go confirm today on how mine is wired, but I'm fairly certain I followed this picture when throwing mine together. It sounds like you're okay - "signal ground" is indeed where your sensors ground out to.

Some MS models have a test mode where you can test fire your coils/injectors. There is definitely an audible sound when they fire.
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
cmj
240sx Wannabe
Posts: 129
Joined: Fri Jun 27, 2008 3:12 am

Re: Please confirm: LS Coil Wiring

Post by cmj »

All is good. Harness worked perfect and MS3x is RAD! Thanks for the reply ^^
Post Reply