Build Your Block: Engine Internal Master Price Sheet
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
Build Your Block: Engine Internal Master Price Sheet
We are Real Street Performance RSrace.com
We are a new vendor to this community, but have been serving the KA24DE community for a long time. A lot of this board's members are using engine setups purchased with us through our ebay store or directly with one of our helpful staff. We specialize in engine internals and have put together this engine build thread for those of you looking to build your engines. I will list a lot of the bottom end parts we have for sale in this thread, if you need something that isnt shown here please PM me for an immediate response. OR please call us at 407-695-7223 and make sure to let us know you are from ka-t.org You can also IM us on AIM at TommyAtRSP or on MSN with tommy@realstreetperformance.com which is also our direct email.
http://www.RealStreetPerformance.com
Phone1: 407-695-7223
AIM: TommyAtRSP
Email: Tommy@RealStreetPerformance.com
MSN: Tommy@RealStreetPerformance.com
To place a order you can email, call, or PM us.
Shipping
Within the continental US : FREE
For anywhere else please contact us. We ship worldwide DAILY.
Here we go...
----------------------------------------------------------------------------
PISTONS
----------------------------------------------------------------------------
Wiseco Forged Pistons - $509.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)
Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
----------------------------------------------------------------------------
JE Forged Pistons - $569.99
(Comes with Rings, Pins, and Locks)
Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
----------------------------------------------------------------------------
CP Forged Pistons - $621.80
(Comes with Rings, Pins, and Locks)
Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
----------------------------------------------------------------------------
CONNECTING RODS
----------------------------------------------------------------------------
Eagle H Beam Rods - $349.99
Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Brian Crower H Beam Rods - $395.76
Part Numbers:
BC6219
OR
BC6218 WITH CUSTOM AGE 625+ ROD BOLT UPGRADE $599
---------------------------------------------------------------------
Manley I Beam Turbo Tuff Rods - $769.99
Part Numbers:
14401-4
---------------------------------------------------------------------
----------------------------------------------------------------------------
PISTON & ROD COMBO SPECIALS
----------------------------------------------------------------------------
Wiseco Forged Pistons w/ Eagle H Beam Rods - $779.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
----------------------------------------------------------------------------
CP Forged Pistons w/ Eagle H Beam Rods - $819.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
JE Forged Pistons w/ Eagle H Beam Rods - $799.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
Wiseco Forged Pistons w/ Pauter X Beam 1000hp Rods - $1289.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
NIS-210-530-1650F
----------------------------------------------------------------------------
CP Forged Pistons w/ Pauter X Beam 1000hp Rods - $1309.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
NIS-210-530-1650F
-------------------------------------------------------------------
JE Forged Pistons w/ Pauter X Beam 1000hp Rods - $1319.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
NIS-210-530-1650F
---------------------------------------------------------------------
Wiseco Forged Pistons w/ Brian Crower Rods - $839.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
-------------------------------------------------------------------
JE Forged Pistons w/ Brian Crower Rods - $899.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
---------------------------------------------------------------------
CP Forged Pistons w/ Brian Crower Rods - $875
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
-----------------------------------------------------------------'
CP Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
14401-4
----------------------------------------------------------------
Wiseco Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1175.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
14401-4
-------------------------------------------------------------------
JE Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
14401-4
----------------------------------------------------------------------------
BEARINGS
----------------------------------------------------------------------------
ACL Duraglide Performance Bearings (Rod/Main)- $99.99
----------------------------------------------------------------------------
FASTENERS
----------------------------------------------------------------------------
ARP Headstuds - $149.99
ARP Mainstuds - $119.99
Our Main stud kits do include the 3 extra longer studs you will need.
We are a new vendor to this community, but have been serving the KA24DE community for a long time. A lot of this board's members are using engine setups purchased with us through our ebay store or directly with one of our helpful staff. We specialize in engine internals and have put together this engine build thread for those of you looking to build your engines. I will list a lot of the bottom end parts we have for sale in this thread, if you need something that isnt shown here please PM me for an immediate response. OR please call us at 407-695-7223 and make sure to let us know you are from ka-t.org You can also IM us on AIM at TommyAtRSP or on MSN with tommy@realstreetperformance.com which is also our direct email.
http://www.RealStreetPerformance.com
Phone1: 407-695-7223
AIM: TommyAtRSP
Email: Tommy@RealStreetPerformance.com
MSN: Tommy@RealStreetPerformance.com
To place a order you can email, call, or PM us.
Shipping
Within the continental US : FREE
For anywhere else please contact us. We ship worldwide DAILY.
Here we go...
----------------------------------------------------------------------------
PISTONS
----------------------------------------------------------------------------
Wiseco Forged Pistons - $509.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)
Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
----------------------------------------------------------------------------
JE Forged Pistons - $569.99
(Comes with Rings, Pins, and Locks)
Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
----------------------------------------------------------------------------
CP Forged Pistons - $621.80
(Comes with Rings, Pins, and Locks)
Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
----------------------------------------------------------------------------
CONNECTING RODS
----------------------------------------------------------------------------
Eagle H Beam Rods - $349.99
Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Brian Crower H Beam Rods - $395.76
Part Numbers:
BC6219
OR
BC6218 WITH CUSTOM AGE 625+ ROD BOLT UPGRADE $599
---------------------------------------------------------------------
Manley I Beam Turbo Tuff Rods - $769.99
Part Numbers:
14401-4
---------------------------------------------------------------------
----------------------------------------------------------------------------
PISTON & ROD COMBO SPECIALS
----------------------------------------------------------------------------
Wiseco Forged Pistons w/ Eagle H Beam Rods - $779.99
(Comes with Rings, Pins, and Locks - Skirt Coating comes Standard)
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
----------------------------------------------------------------------------
CP Forged Pistons w/ Eagle H Beam Rods - $819.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
JE Forged Pistons w/ Eagle H Beam Rods - $799.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
CRS6496N3D
----------------------------------------------------------------------------
Wiseco Forged Pistons w/ Pauter X Beam 1000hp Rods - $1289.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
NIS-210-530-1650F
----------------------------------------------------------------------------
CP Forged Pistons w/ Pauter X Beam 1000hp Rods - $1309.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
NIS-210-530-1650F
-------------------------------------------------------------------
JE Forged Pistons w/ Pauter X Beam 1000hp Rods - $1319.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
NIS-210-530-1650F
---------------------------------------------------------------------
Wiseco Forged Pistons w/ Brian Crower Rods - $839.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
-------------------------------------------------------------------
JE Forged Pistons w/ Brian Crower Rods - $899.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
---------------------------------------------------------------------
CP Forged Pistons w/ Brian Crower Rods - $875
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
BC6219 Standard
BC6218 is 625+ Custom Age Bolt upgrade add $250
-----------------------------------------------------------------'
CP Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99
Piston Part Numbers:
SC7299 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
SC7300 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
Rod Part Numbers:
14401-4
----------------------------------------------------------------
Wiseco Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1175.99
Piston Part Numbers:
K586M89 // Bore: 89.00mm (Standard Bore) // Compression: 9.0:1
K586M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
K586M90 // Bore: 90.00mm (+.040" Overbore) // Compression 9.0:1
K587M89 // Bore: 89.00mm (Standard Bore) // Compression: 10:5:1
K587M89.5 // Bore: 89.50mm (+.020" Overbore) // Compression: 10:5:1
K587M90 // Bore: 90.00mm (+.040" Overbore) // Compression 10:5:1
Rod Part Numbers:
14401-4
-------------------------------------------------------------------
JE Forged Pistons w/ Manley I Beam Turbo Tuff Rods - $1189.99
Piston Part Numbers:
244514 // Bore: 89.50mm (+.020" Overbore) // Compression: 9.0:1
250642 // Bore: 90.00mm (+.040" Overbore) // Compression 11.0:1
Rod Part Numbers:
14401-4
----------------------------------------------------------------------------
BEARINGS
----------------------------------------------------------------------------
ACL Duraglide Performance Bearings (Rod/Main)- $99.99
----------------------------------------------------------------------------
FASTENERS
----------------------------------------------------------------------------
ARP Headstuds - $149.99
ARP Mainstuds - $119.99
Our Main stud kits do include the 3 extra longer studs you will need.
Last edited by RealStreet on Fri Jun 15, 2012 1:29 pm, edited 2 times in total.
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
- nissanfanatic
- SuperMod
- Posts: 5078
- Joined: Sat Nov 20, 2004 1:16 pm
- LuSt4Boost
- Driving Mom's Station Wagon
- Posts: 40
- Joined: Thu Dec 10, 2009 3:45 pm
- Location: Largo, MD
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
-
- Dont Question My Nissan Knowledge
- Posts: 829
- Joined: Fri Nov 20, 2009 3:12 pm
- Location: Jersey
I see that CP pistons cost more the JE pistons but when you compare the pricing for the combo with Pauter X beam rods the JE combo verus the CP combo it the JE combo that costs more. Also in the Pauter I beam combo the pricing is the same.If the pistons cost are different and the rods are the same rods for both combos the difference in piston cost should be seen in the combo prices. I don't get it. Why would a more expensive pistons set cost more on its own and then less in a combo and why would a less expensive piston set cost less on its own and more in a combo when the rods are exactly the same for both ? Please explain. I'm sure its an error of some sort.
CP pistons-$592.20
JE pistons-$549.99
Combo with Pauter X-beam rods
with:
CP pistons-$1,219.99
JE pistons-$1,239.99
CP pistons-$592.20
JE pistons-$549.99
Combo with Pauter X-beam rods
with:
CP pistons-$1,219.99
JE pistons-$1,239.99
-
- Knows Some Stuff About 240's!
- Posts: 448
- Joined: Sat Oct 08, 2005 2:13 pm
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
- RealStreet
- KA-T.org Sponsor
- Posts: 57
- Joined: Wed Jan 06, 2010 4:47 pm
- Location: Longwood, FL
- Contact:
New Poster, Same great deals and service! Hello all my name is Prince here at Real Street and I am happy to be able to help everyone reach their motor building goals. Post here for quotes and PM for deals!
Sales, Installations, Dyno, Fabrication, Motor Builds
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750
Visit us at our new location!
850 N US HWY 17-92
Longwood, FL 32750