attention enthalpy, wondering if this is possible...

http://www.rs-enthalpy.com
Post Reply
motorhead
Dreams of owning a 240!
Posts: 60
Joined: Tue Jan 26, 2010 6:03 pm

attention enthalpy, wondering if this is possible...

Post by motorhead »

can you tune my 97 d21 obd2 ecu? its obd2 like a newer 240 but has a single cam motor with a truck specific maf intake and cam. the intake uses side feed injectors.....

any possible setup or should i repin my harness for a s15 ecu and run the stock s15 maf / injectors etc.

remember it is a sohc so i pretty much have to stick with this intake. if i run the 89-90 intake it uses top feed injectors.

btw my setup will be
t3/to4e
7psi
550 or 740 cc injectors
stock truck maf blow thru or stock 240sx maf draw thru

let me know if this is possible
. 97 D21 . BELLTECH DROPPED . TORSION BARS .ENKEI'S . AZENIS . TURBO
NYR SCCA MEMBER
Image
motorhead
Dreams of owning a 240!
Posts: 60
Joined: Tue Jan 26, 2010 6:03 pm

Post by motorhead »

so can you tune my ecu or do i have to get a obd2 240sx ecu?
. 97 D21 . BELLTECH DROPPED . TORSION BARS .ENKEI'S . AZENIS . TURBO
NYR SCCA MEMBER
Image
Jybfan04
Driving Mom's Station Wagon
Posts: 33
Joined: Wed Oct 08, 2008 7:46 am

Post by Jybfan04 »

You will probably get a faster response emailing him, you can find his contact information on his site.

With the car having a SOHC it may be best if you ran a 240sx KA SOHC ecu..
motorhead
Dreams of owning a 240!
Posts: 60
Joined: Tue Jan 26, 2010 6:03 pm

Post by motorhead »

its an 88 pin ecu also found in altimas
. 97 D21 . BELLTECH DROPPED . TORSION BARS .ENKEI'S . AZENIS . TURBO
NYR SCCA MEMBER
Image
Post Reply