KA24E Top Mount T3 Turbo Manifold Cast

www.godspeedproject.com
Post Reply
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

KA24E Top Mount T3 Turbo Manifold Cast

Post by Godspeed Project »

Godspeed Project KA24E Top Mount T3 Turbo Manifold
- LIFETIME Warranty
- Strong Cast Material
- T3 Flange
- 35mm or 38mm Wastegate Flange



Image

Image

Image


This manifold is perfect for those who want to go turbo on their single cam KAs. Many of us here at Godspeed Project are very experienced in turbo KAs and can help you put together your dream set up. Contact us for any questions.

KA-T.org Special Pricing of $180 shipped within the 48 states or $170 picked up in El Monte, California. CA Customers add 9.25% Sales Tax.
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
User avatar
souljaseth33
240sx Wannabe
Posts: 167
Joined: Sun Jan 23, 2011 10:01 am
Location: Albany, NY

Post by souljaseth33 »

I've been thinking about trying one of these out for a while now.. Are the hole for the turbo and wastegate threaded?
Hebrew Hammer - The baddest Heeb this side of Tel Aviv

www.slideny.com

Thinking about E-Mance? Think twice and read this:
viewtopic.php?t=45057&postdays=0&postorder=asc&start=0

WARNING: Emance is now using an alias as ECUTUNERGUY and REFLASHPROS. Spread the word.
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

Post by Godspeed Project »

The holes are indeed threaded!
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
User avatar
wesamiss
Knows Some Stuff About 240's!
Posts: 357
Joined: Tue Mar 08, 2011 8:34 pm
Location: Orlando, FL

Post by wesamiss »

looks pretty sick.

I would personally like to see a bottom mount t2 manifold for the ka24e from godspeed. something that places the turbo in the same spot as the sr20det, this way someone with the sohc could use the sr piping, and downpipe. it would also make going DE-T less of a hassle, for anyone who wanted to.
WES
keytops
Dont Question My Nissan Knowledge
Posts: 772
Joined: Fri Apr 04, 2008 11:24 am
Location: SOCAL

Post by keytops »

I have their manifold for the de, I ceramic coated mine so that may help or hurt things. So far so good, turbo positioning is very good, ports are much larger than the ones on the head, however included studs do not thread into manifold. T3 and T4 option is nice. I'm running a garret t04/e with t4 centered exhaust housing on this manifold if anyone wants to know
98 s14 SE Track and weekender.
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

Post by Godspeed Project »

keytops wrote:I have their manifold for the de, I ceramic coated mine so that may help or hurt things. So far so good, turbo positioning is very good, ports are much larger than the ones on the head, however included studs do not thread into manifold. T3 and T4 option is nice. I'm running a garret t04/e with t4 centered exhaust housing on this manifold if anyone wants to know
Nice, have any pictures? In my personal opinion ceramic coating can only make things better, it definitely helps with heat!
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

Post by Godspeed Project »

wesamiss wrote:looks pretty sick.

I would personally like to see a bottom mount t2 manifold for the ka24e from godspeed. something that places the turbo in the same spot as the sr20det, this way someone with the sohc could use the sr piping, and downpipe. it would also make going DE-T less of a hassle, for anyone who wanted to.
We are in the process of developing a bottom mount manifold for the ka24e. We make one for the dual cam but will keep you updated on the progress of the bottom mount for the ka24e.
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
project s13
Driving Mom's Station Wagon
Posts: 27
Joined: Wed Jan 02, 2013 4:22 pm
Location: VEGAS

Post by project s13 »

Hows it going with the bottom mount t3.

Would this top mount clear a/c and everything else?
Catch my DRIFT? Slide my COUPE!
User avatar
shift_down
SuperMod
Posts: 1833
Joined: Mon Nov 28, 2011 11:00 am
Location: tulsa oklahoma

Post by shift_down »

This looks nice. The split in the middle of the flange is a good add.
Come at me bro

Fast
Reliable
Cheap;
You can only pick two, so choose wisely!

My build thread: viewtopic.php?t=57539
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

Post by Godspeed Project »

The Manifold should clear A/C no problem.
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
tapdeznutz
Learners Permit
Posts: 8
Joined: Sun Aug 28, 2011 11:09 pm
Contact:

Post by tapdeznutz »

I am in for the ka24E bottom mount T25 flange turbo manifold.
1990 White Hatch ka24E
Rocking: Intake, Headers, Resonated Test Pipe, HKS Hi-Power exhaust 2.5" piping (very mellow sound) Aluminum Crank Pulley, 1pc Steel Driveshaft
Godspeed Project
Driving Mom's Station Wagon
Posts: 41
Joined: Fri May 25, 2012 9:36 am

Post by Godspeed Project »

Still in the development stages :D!
Chris @ Godspeed Project
1(626)442-3988 Ask for Chris
2518 Continental Ave.
South El Monte, CA 91733
User avatar
schmauster920
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2612
Joined: Tue Feb 20, 2007 5:25 pm
Location: CA

Post by schmauster920 »

The ka24e exhaust ports are the same shape as this manifold.. Holy crap this might be a half decent ebay part lol
D21, Built KA24DE, 740cc, T4, WeatherGuard Tool Box, Tial 40mm, Megasquirt 3 in progress
neverlift
Knows Some Stuff About 240's!
Posts: 263
Joined: Mon Apr 03, 2006 11:35 am
Location: fla

Post by neverlift »

a circular port is easy lolnone of the de stuff seems to have legit ports
Image
Post Reply